Service Guide

Removing the DASD backplane assembly

(1)

Tab

(2)

DASD backplane

To remove the DASD backplane assembly:

1. Power OFF the appliance.
2. Disconnect all external cables from the appliance.
3. Pull out the hot-swap drives far enough to remove the DASD backplane assembly.
4. Remove the cover (see "Removing the cover (Model 100)" or Removing the cover (Model 200)).
5. Disconnect cable.
6. Press the arrow on the tab(1) to release the backplane.
7. Carefully slide out the DASD backplane(2)to remove it.