Installation Guide

Setting up the appliance

This section provides information about the initial installation and setup for the Models 100 and 200.

Setting up the Model 100

The initial installation of the Model 100 consists of the following steps:

1. Installing optional features (see Installing optional features).
2. Connecting the power cords and communication cables (see Cabling).
3. Starting the appliance and verifying that the power-on diagnostics completed successfully (see Starting the appliance).
4. Performing the initial configuration (see Performing initial configuration).

Setting up the Model 200

The initial installation of a Model 200 consists of the following steps:

1. Installing in a rack (see Setting up the Model 200 in a rack).
2. Installing optional features (see Installing optional features and Installing a storage unit).
3. Connecting the power cords and communication cables (see Cabling).
4. Starting the appliance and verifying that the power-on diagnostics completed successfully (see Starting the appliance).
5. Performing the initial configuration (see Performing initial configuration).

Setting up the Model 200 in a rack

For Model 200, you must first install the appliance in a rack, using the rack-mounting kit provided.

The following reduced-size illustration of the front and the back of the rack mounting template shows where to place the clip nuts or cage nuts when installing your appliance in a rack.

Figure 1. Front and back of the rack mounting template

Figure 2. Rack mounting instructions