IBM TotalStorage Network Attached Storage
Patch for IBM Director Support Program Version 2.12

This patch package contains fixes for the IBM Director Support Program Version 2.12,
which is part of the preloaded software on IBM TotalStorage Network Attached Storage
appliance products.  This patch applies to the following IBM TotalStorage Network
Attached Storage products:

IBM TotalStorage Network Attached Storage 200 (Models 200 and 225)
IBM TotalStorage Network Attached Storage 300 (Model 325)
IBM TotalStorage Network Attached Storage 300G (Models G00 and G25)


Problems fixed in this patch
============================

SYMPTOM: If you are using the IBM Director (or Tivoli IT Director) Management
Console on your network to manage your IBM TotalStorage Network Attached Storage
appliance, the appliance name does not appear in the list of systems and devices.


Files contained in this patch
=============================

Name				Size (bytes)		Date/Time
----				------------		---------
README.TXT (this file)		-			-
TCPIP.NET			 35,328			6/21/2001 11:52 AM
TCPIP2.NET			 35,328			6/21/2001 11:52 AM
TCPIP3.NET			 35,328			6/21/2001 11:52 AM
TCPIP4.NET			 35,328			6/21/2001 11:52 AM
UPDATE.BAT			    838			6/28/2001  2:28 PM
NFD212UPDATE.EXE		359,608			8/30/2001  5:47	PM
UTILS.WBC			    487			8/30/2001  3:32 PM
	

Installing this patch
=====================

(NOTE: If you are installing this patch on a two-node appliance (a NAS 300 Model 325,
or a NAS 300G Model G25), you will need to install the patch on both nodes.)

To install this patch:

1. If needed unpack the contents of "disrupd.exe".  The above files listed above will be unpacked and should be placed on a "Floppy Diskette" or a "Directory/Folder".  Patches will not properly 
install if applied "Headless" via Terminal Services. 

2. From the IBM NAS console (accessible either by directly attaching a keyboard,
mouse, and monitor to the node, or by using Windows Terminal Services from another
workstation on the network; see the User's Reference for more details), start a
DOS command prompt by clicking the Start button at the bottom left-hand corner of
the console, and then selecting Programs, Accessories, Command Prompt.

3. At the DOS command prompt, type "x:fixes\NFD212update"(Note x:\fixes 'x' is the drive and 
'fixes' is the directory where the fixes are located).  The update will copy IBM 
Director Support Program files from the diskette/folder to the appliance hard drive,
and then automatically launch the IBM Director Network Drivers application,
providing instructions on how to enable the IBM Director TCP/IP drivers.
Follow the instructions provided.  Once you have closed the Network Drivers
application, the update will be complete.

4. Remove the diskette/folder from the IBM NAS Appliance.  No Reboot is necessary.