############################################################################## Contents of this directory and version information: Component Version Platform --------- -------- --------------------- IBM StorWatch SAN Data Gateway Specialist 2.7.02 Solaris 2.6, 2.7, 2.8 Filename: SS272SOL.bin ############################################################################## Contents of this document: * Prerequisites * Installing the IBM StorWatch SAN Data Gateway Specialist * Reactivating the Default Administrator Account * Running the IBM StorWatch SAN Data Gateway Specialist * Uninstalling the IBM StorWatch SAN Data Gateway Specialist * Release Notes ############################################################################## Prerequisites -------------- Solaris 2.6, 2.7 or 2.8 80MB or greater system memory 60MB free disk space in the destination partition Common Desktop Environment (CDE) Note: Limitations in the OpenWindows Desktop Environment inhibit drag and drop editing functions on the IBM StorWatch SAN Data Gateway Specialist Device Mapping and Virtual Private Map screens. If you need to use either of these IBM StorWatch SAN Data Gateway Specialist features, you must use the CDE rather than the OpenWindows Desktop Environment. Before beginning the installation process, the ethernet LAN must already be correctly installed and configured for TCP/IP protocal. Contact your Network Administrator if you need assistance in setting this up. ** IMPORTANT ** It is necessary to first install patches for the operating system. Download and install the latest patch cluster from http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access Without these patches, you may observe unexpected behavior from the IBM StorWatch SAN Data Gateway Specialist software. The following list contains mandatory and recommended minimum patch levels. ------------- --------- --------- ---- ------------------------ 2.6 (5.6) 105490-07 required Linker Patch 2.6 (5.6) 105568-14 required Libthread Patch 2.6 (5.6) 105210-25 required LibC Patch 2.6 (5.6) 106040-13 required X Input & Output Method Patch 2.6 (5.6) 105181-17 recommended Kernel Update (socket close/hang) 2.6 (5.6) 105669-09 recommended CDE 1.2: libDTSvc Patch (dtmail) 2.6 (5.6) 105284-31 recommended Motif 1.2.7: Runtime library patch 7 (5.7) 106980-05 required Libthread Patch 7 (5.7) 107636-03 required X Input & Output Method Patch 7 (5.7) 107607-01 required motif fontlist fontset libxm 7 (5.7) 107078-18 required (1) OpenWindows 3.6.1 Xsun Patch Installing the IBM StorWatch SAN Data Gateway Specialist --------------------------- Note: If you are updating from release 2.5.02 or lower, remove the package as follows before proceeding with the installation. pkgrm PLTsandir 1. Change directory to the directory that contains the SS272SOL.bin file. 2. The IBM StorWatch SAN Data Gateway Specialist software installation program is a single "bin" file. You need to set execute permission for the file as follows: chmod 777 SS272SOL.bin 3. At the prompt type: SS272SOL.bin 4. In a few moments a window will be displayed that contains the text "InstallAnywhere". As of version 2.6, the IBM StorWatch SAN Data Gateway Specialist uses this installation software program. 5. A few moments later, the IBM StorWatch SAN Data Gateway Specialist splash screen will be displayed. 6. Follow the prompts during the installation. If you accept the default settings, both the Server and Client components will be installed. You have an option to install the Server only or Client only. If you want to use multiple Clients, install the Server component on a single system and install only the Client component on the other systems. You also have an option to place the program links in a folder other than /usr/bin. Reactivating the Default Administrator Account ---------------------------------------------- If the default administrator account is no longer active and you lose the login and password for the new administrator account, you can delete the password file to regain administrator access. The password file is named SanmgrUsers. Deleting the password file on the IBM StorWatch SAN Data Gateway Specialist Server system automatically reactivates the default administrator account. Use the following procedure to reactivate the default administrator account. 1. Quit the IBM StorWatch SAN Data Gateway Specialist Client program. 2. Stop the IBM StorWatch SAN Data Gateway Specialist Server program by typing stop in the Server window. 3. If you accepted the default software installation location, delete the SanmgrUsers file located at: /IBM_StorWatch_SAN_Data_Gateway_Specialist/IBM StorWatch/ SAN Data Gateway Specialist/lib/Server/SanMgrUsers 4. Start the IBM StorWatch SAN Data Gateway Specialist Server program. 5. Start the IBM StorWatch SAN Data Gateway Specialist Client program and log in using the default administrator account as follows: login : admin password: password Running the IBM StorWatch SAN Data Gateway Specialist ------------------------ The Server program must be started first. Once the Server is running, you can then start the local (or remote) Client(s). Launch scripts are installed in /usr/bin. Since this will typically be in your path, you do not need to specify it. If you start from a shell script, you should include the path. To start the server, type: /usr/bin/ServerLaunch If you intend to run the Server from a script as a background task, use: /usr/bin/ServerLaunch -background & To start the client, type: /usr/bin/ClientLaunch The IBM StorWatch SAN Data Gateway Specialist splash screen will be displayed followed by its program window. Uninstalling the IBM StorWatch SAN Data Gateway Specialist ----------------------------- 1. Change directory to the directory where you installed the software. If you installed it in the default location: cd /IBM_StorWatch_SAN_Data_Gateway_Specialist 2. Change directory to the Unistaller Data subdirectory: cd UninstallerData 3. Execute the Unistaller program by typing: Uninstall_StorWatch_2.7 Release Notes ------------- 1. Device Firmware upload now operates as expected. NOTE: the upload image must be the exact image that is to be loaded onto the device. Some firmware images are wrapped in code to enable utilites to install them onto the device. The IBM StorWatch SAN Data Gateway Specialist requires that these images not be wrapped.Additionally, firmware version 4.03.04 is required to support this feature. 2. Logging into the IBM StorWatch SAN Data Gateway Specialist without Administrator privileges, no longer allows changes to Channel Zoning. 3. GUI no longer allows 2 firmware downloads which can cause the GUI to hang and require a restart of the IBM StorWatch SAN Data Gateway Specialist. ##############################################################################