VISIT OUR PAGES ON THE INTERNET _______________________________ http://www.ibm.com/software/network/support On this page, you can find: Newsgroups, code fixes, the Software Alert, Tips, and other information. From the 'pull down box,' select the product that you are interested in. ********************************************************************* * * * DATE: 10/20/00 * * * * * * DESCRIPTION: AFA6030 * * * * README FILE FOR IBM OS/2 Access Feature for OS/2 Warp, * * Warp, Version 6.01 (prerequisite product) * * * * APAR: Multiple APAR fixes, see below. * * * * * * * * This package contains APAR fixes to the product above. This * * package can be distributed to anyone who has a license for * * this product. * * * ********************************************************************* PREREQUISITES : IBM OS/2 Access Feature, Version 6.01 CSD WR21161 ______________ (CSD 1). AFA6030 supersedes AFA6020, AFA6010 NOTE: This fixpack can not be applied to a system with Access Feature for OS/2 version 6.0 without CSD WR21161. PROBLEMS FIXED in this Package: ______________________________ APARS added by AFA6030: JR15165 FINISH IMPLEMENTING AMB 8264 TOPOLOGY CHANGE JR15166 SENSE 8014001 - NO ROUTE TO DEST NODE JR24784 HPR GIVES HPR0042E IF CP NAME STARTS WITH @(NETID) JR14830 SDLC LINK NOT RECOVERED ON 2ND RECYCLE JR15193 MESSAGES LOGGED IN ACSTRACE IF NO PCOMM. JR15167 MISC TRAPS WHEN SNA SERVICES FAILS TO START JR15169 NON-HOST LINK FAILURE CAUSED HOST BACKUP LINK ACT. JR15187 EEDLC WITH CP-CP SUPP=NO SHOULD ACTIVATE IF CF SUPPORTED JR15189 CMLINKS SESS FIELD INCORRECT WITH MLTG LINKS JR14782 ON MULTIPLE ACTIVATION REQUEST DO NOT CREATE DUPLICATE DLC JR15188 TRAP D IN SDLCPD.SYS FOR MLTG LINKS ON HEAVILY USED SDLC APARS added by AFA6020: JR14426 CHANGE FOR MODIFIED PCIMPA CARDS JR14816 SWITCHED SDLC WITH MPA, PCM0021 APPEARS JR14818 CMSTOP SOFT FAILS ON AUTO_REACT LINK TIMEOUT JR14513 ARTIC960 SUPPORTS MORE DATABLOCKS ON TRANSMIT JR14822 CS2 TROUBLE RESTARTING AFTER 30 TIMES JR14536 AFTER RECYCLE OF EN IN HPR NETWORK APPC MAY HANG JR14824 ADD CONV. LAST VERB POSTED TIME FOR DISPLAY JR14533 ACTPU REJECTED WITH 08010000 ON ANYNET CLIENT JR14544 IGNORE BOGUS OS/2 ERROR IN X.25 APARS added by AFAA6010: JR13289 ADD DB2CLIV2.BND IN .LST FILE FOR DRDA SERVERS (FUNCTION ADDED) JR13440 SDLC MULTIDROP LINE EXPERIENCING BAD FRAMES FROM PCI MPA ADAPTER JR13573 UNBIND OVER HPR FOR CS/2 GW LU FAILED DUE TO EXPIRED CONNECTION JR13577 CS/2, ROPS RCKRNL.EXE SYS3175 TRAP ON LONG COMMAND > 225. JR13594 XID FAILURE, SENSE CODE 1016000B, ON CS/2 GATEWAY DOWNSTREAM LINK WITH AUTO_REACTIVATE(INFINITE_RETRY) CODED JR13596 AFTER NOTICING THAT THE SERVICES WERE PARTIALLY STARTED, THE CUSTOMER STOPS CS/2 AND IT ABENDS WITH A SYS3175. JR13652 0809003E, INCORRECT XID BETWEEN 2210 & CS2 JR13658 CS/2 BRANCH EXTENDER SENDS SENSE CODE 0806002B AFTER LOCATE/BIND ENCHANGE WITH VTAM HOST. JR13738 PROBLEMS WITH SDLC LINK RESTART AFTER OUTAGE ON CS/2 5.0 WITH PCI MPA ADAPTER. JR13771 LUM0007 MAY BE DISPLAYED AFTER INSTALLING FROM CD-ROM. JR13895 HPR CAUSES SYSTEM DUMP, 2216 BOX DUMPS 3 - 5 MINUTES INTO STANDARD 30 MINUTE RUN. CS/2 SENT INCORRECT DATA. JR13947 SQLWARN FLAGS ARE NOT BEING RESET AFTER EXECUTE JR13968 A TRACE FILE THAT FMTTRACE CAN NOT FORMAT. FMTTRACE TERMINATES WITH SYS3175, IN CS/2 5.0 JR13971 PROBLEM PROCESSING LOCKED FILES DURING CID INSTALL FROM CODE SERVER JR13993 SLI DOES NOT WAIT MORE THAN ONCE ON LUA_WAIT CONDITION JR14119 CS/2, ROPS RCKRNL.EXE SYS3175 TRAP ON INVALID OS/2 COMMAND GREATER THAN 255 CHARACTERS. JR14133 COMMON SERVICES API "GET_CP_CONVERT_TABLE" VERB VAILS WITH RC = X'00000001' SEC RC X'00000631' OR X'00000632 FOR USER CODE PAGE. JR14197 LUA SEGMENTED RECORDS MAY CONTAIN AN EXTRA 1 OR 2 BYTES OF DATA. JR14257 DURING CMVERIFY, MESSAGE IN RESET-BITS APPEARS. JR14308 CS/2 BUILDS ALERT MS MAJOR VECTOR CONTAINING BAD SUB VECTOR LENGTH PARAMETER JR14313 SYS3175 ON ACSAPPC.DLL WHEN TRANSMITING WIDE FILES OVER LU6.2 JR14331 CS/2 6.0 SDLC DRIVER DOES NOT CHECK 64K PHYSICAL MEMORY BOUNDARY WHEN ALLOCATING DMA BUFFER. NOTE: You can find the APAR text via http://www.ibm.com/software/network/support ___________________________________________________________________ INSTALLATION INSTRUCTIONS __________________________ NOTES This package of APAR fixes can be applied either to a target workstation or to a code server directory. This package of fixes can be applied to all language versions of OS/2 Access Feature for OS/2 Warp, Version 6.01. PARTS IN THIS PACKAGE 10-04-00 9:40a 165231 0 B03.ZIP 10-04-00 9:40a 113273 0 B05.ZIP 10-04-00 9:40a 131271 0 B12.ZIP 10-04-00 9:40a 17471 0 B16.ZIP 10-04-00 9:40a 27738 0 B21.ZIP 10-04-00 9:40a 478487 0 B22.ZIP 10-04-00 9:40a 50327 0 B29.ZIP 10-04-00 9:40a 33970 0 B31.ZIP 10-04-00 9:40a 24138 0 B38.ZIP 10-04-00 9:40a 17759 0 B42.ZIP 10-04-00 9:40a 121702 0 B44.ZIP 10-04-00 9:40a 237674 0 B46.ZIP 10-04-00 9:40a 169092 0 B50.ZIP 10-04-00 9:40a 38299 0 B53.ZIP 10-04-00 9:40a 36368 0 B58.ZIP 10-04-00 9:40a 32805 0 B62.ZIP 10-04-00 9:40a 46439 0 B76.ZIP 10-04-00 9:40a 54828 0 B95.ZIP 10-04-00 9:40a 2131 0 BUNDLE.LST 6-21-00 3:56a 28730 0 MPADD.SYS 6-21-00 3:56a 32826 0 PCIMPADD.SYS 6-21-00 3:56a 26682 0 VISASDLC.SYS EXECUTABLES UPDATED 10-03-00 23:41 31232 CMLIB/ACSAPLDR.EXE 02-28-00 12:19 30810 CMLIB/ACSLANDD.SYS 09-08-00 12:58 21452 CMLIB/ACSRASP.EXE 03-22-00 14:28 27788 CMLIB/ACSSNMER.EXE 02-28-00 12:18 162329 CMLIB/CMSETUP.EXE 03-10-00 23:38 74381 CMLIB/CPT2CCP.EXE 06-21-00 03:58 93841 CMLIB/DISPLAY.EXE 10-03-00 23:41 40448 CMLIB/DLL/ACDI16.DLL 10-03-00 23:41 881152 CMLIB/DLL/ACSAPPC.DLL 03-10-00 23:36 63622 CMLIB/DLL/ACSGCBLD.DLL 10-03-00 23:41 44032 CMLIB/DLL/ACSMPTN.DLL 10-03-00 23:41 1024 CMLIB/DLL/ACSRDECR.DLL 10-03-00 23:41 1024 CMLIB/DLL/ACSRENCR.DLL 10-03-00 23:41 166912 CMLIB/DLL/ACSRUI16.DLL 02-28-00 12:23 63169 CMLIB/DLL/ACSSLI.DLL 03-22-00 14:28 24186 CMLIB/DLL/ACSSNCNM.DLL 03-22-00 14:28 3234 CMLIB/DLL/ACSSNME.DLL 03-22-00 14:28 6798 CMLIB/DLL/ACSSNMEM.DLL 10-03-00 23:41 47104 CMLIB/DLL/ACSSVC16.DLL 03-22-00 14:28 40123 CMLIB/DLL/ACSVSPCM.DLL 10-03-00 23:41 100864 CMLIB/DLL/ACSX25.DLL 02-28-00 12:18 196213 CMLIB/DLL/CMINST.DLL 06-21-00 03:57 32924 CMLIB/DLL/DLURDLC.DLL 03-10-00 23:32 68275 CMLIB/DLL/RCVMAIN.DLL 10-04-00 00:05 290931 CMLIB/FMTTRACE.EXE 06-21-00 03:56 28730 CMLIB/MPADD.SYS 06-21-00 03:56 32826 CMLIB/PCIMPADD.SYS 06-21-00 03:58 118412 CMLIB/PMDSPLAY.EXE 03-10-00 23:31 37579 CMLIB/RCKRNL.EXE 06-21-00 03:46 49866 CMLIB/REMMAIN.EXE 09-08-00 14:13 165 CMLIB/SYSLEVEL.CSA 06-21-00 03:56 26682 CMLIB/VISASDLC.SYS CMFIX (APPLY SOFTWARE UPDATES) Displays a panel that enables you to apply software updates from a local drive, a LAN-attached drive, or from the Internet. To execute CMFIX, you can select the Software Update icon in the Problem Determination folder, or you can run CMFIX from an OS/2 command line. CMFIX applies software updates (APARs or PTFs) to a target workstation and/or a code server. A code server is a locally or LAN-accessible server that contains a directory of the installable OS/2 Access Feature image. We will discuss the two installation methods, "Using CMFIX to Update a Code Server" and "Using CMFIX to Update a Single Target Workstation," later in this section. CMFIX also creates a file called CM2APAR.LOG on the machine that executes CMFIX. This file contains CMFIX messages. RUNNING CMFIX FROM THE COMMAND LINE When running CMFIX from an OS/2 command prompt, use the following syntax: Syntax >>--ç--.-------.--.------.--CMFIX-----------------------> '-drive-' '-path-' >--.----------------------.--.----.--.---.------------->< ³-/A--location--.----.-³ '-/Q-' '-?-' ³ '-/B-' ³ ³-/D-------------------³ '-/U-------------------' Note: Running CMFIX from the command line will not update a code server. Parameters drive The drive where the CMFIX.EXE file resides. Specify a drive if it is not the drive you are currently using. path The path where the CMFIX.EXE file resides. Use this parameter if the file is not in the path you are currently using. /A location Applies an update from the local or LAN-attached drive location. This drive must be directly accessible from your workstation. When you specify the location of the update, use the form "d:\path". /B Creates a backup of the changed files. /D Deletes a previously created backup. /U Uses a previously created backup to remove an applied update. /Q Suppresses all messages. A progress indicator is displayed requiring no operator intervention. ? Displays syntax information describing the available options. Remarks Refer to the online help for detailed information about each feature. Examples To display a panel where you can specify the location of an update and choose whether to install or remove an update, use the following statement: CMFIX To install a software update located on m:\updates, use the following statement: CMFIX /A m:\updates To view the syntax for CMFIX, use the following statement: CMFIX ? USING CMFIX TO UPDATE A CODE SERVER This is the recommended method to apply APAR fix packages to OS/2 Access Feature V6.01. By following these instructions, you will have a new, updated version of OS/2 Access Feature V6.01 in a "code server" directory. You can then use the code server directory when installing new workstations. 1. CREATE A CODE SERVER DIRECTORY. A code server is a locally or LAN-accessible server that contains a directory of the installable OS/2 Access Feature image. To create a code server, if you have not already done so, follow these steps: a. Create a code server directory, such as AFSERVR\CODE. b. Use XCOPY to copy all the files from the \CLIENTS\OS2\WARPAF directory on the OS/2 Access Feature CD-ROM to the code server directory you created in Step 1a. For example, change directories to \CLIENTS\OS2\WARPAF on the OS/2 Access Feature CD-ROM and type: XCOPY *.* Q:\AFSERVR\CODE /s to copy the files. 2. EXECUTE CMFIX TO UPDATE THE CODE SERVER DIRECTORY. a. Execute CMFIX by selecting the Software Update icon in the Problem Determination folder, or running CMFIX from an OS/2 command line. b. Select the "Apply to Code Server" checkbox. c. For "Software Update Source," choose either "Local" or "Internet." "Local" means the APAR fix package is on an attached drive, and "Internet" means the package is on the IBM Internet site. d. Select the "Find" pushbutton, select the APAR fix package location, and highlight the BUNDLE.LST file. Select "OK." Then, select "OK" from the "Software Update" window. You will be prompted for the location of your code server directory. e. Close the "Software Update" window. f. Check the file cm2apar.log for any errors that may have occurred in the update process. This procedure is explained in the CMFIX online helps. Invoke CMFIX, select the Help button, and then select F2. 3. EXECUTE CMSETUP TO UPDATE OS/2 ACCESS FEATURE WORKSTATIONS. a. On the OS/2 Access Feature that you want updated, execute CMSETUP from the code server directory. For example: Q:\AFSERVR\CODE\CMSETUP b. Follow the normal installation process until the "Refresh Product Files" window appears. Select the REINSTALL option to update your workstation with the fixes. USING CMFIX TO UPDATE A TARGET WORKSTATION Use this method if you would like to update a single OS/2 Access Feature V6.01 workstation. If you add additional functions to your configuration, you will need to reapply any APAR fix packages, because CMSETUP will pull the new code from the directory where the install was executed. This will overlay any fixes previously applied. Only files that are older than the fixpack files being applied will be updated. If you use a code server, you do not need to reapply the fixes. Using the code server is the recommended method for updates. 1. EXECUTE CMFIX TO UPDATE THE WORKSTATION. a. Execute CMFIX by selecting the Software Update icon in the Problem Determination folder, or running CMFIX from an OS/2 command line. b. Select the "Apply" radio button; optionally, select the "Create Backup" checkbox. c. For "Software Update Source," choose either "Local" or "Internet." "Local" means the APAR fix package is on an attached drive(*), and "Internet" means the package is on the IBM Internet site. (*) the fix was downloaded manually from the IBM Internet site, rather than via CMFIX. d. Select the "Find" pushbutton, select the APAR fix package location, and highlight the BUNDLE.LST file. Select "OK." Then, select "OK" from the "Software Update" window. e. Close the "Software Update" window. f. Check the file cm2apar.log for any errors that may have occurred in the update process. This procedure is explained in the CMFIX online helps. Invoke CMFIX, select the Help button, and then select F2. IBM COPYRIGHT INFORMATION _________________________ IBM eNetwork OS/2 Access Feature for OS/2 Warp, Version 6.01 (c) Copyright International Business Machines Corporation 1988, 1996, 1998, 1999. All rights reserved. Note to U.S. Government Users - Documentation related to restricted rights - Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp. LIMIT OF LIABILITY __________________ License to the contained APAR fixes is conditioned upon the recipient holding a license to the prerequisite product. The license terms and conditions of the APAR fixes are the same as those for the prerequisite product. Please see the product license for specifics.