VISIT OUR PAGES ON THE INTERNET _______________________________ IBM eNetwork Communications Server for OS/2 Warp Support http://www.software.ibm./enetwork/commserver/support IBM eNetwork Personal Communications Support http://www.software.ibm.com/enetwork/pcomm/support You can more eNetwork Software support information is available at http://www.software.ibm.com/enetwork/support You can jump from there to any of the eNetwork support pages. You can also view and subscribe to the eNetwork Software Support Alert newsletter, which highlights the latest code fixes, support information, and hot tips each month. "IBM eNetwork On-Demand Education" provides information on our products from various perspectives. http://www.sofware.ibm.com/enetwork/education/explore/ ********************************************************************* * * * DATE: 09/01/98 * * * * DESCRIPTION: afa5038 * * * * README FILE FOR IBM eNetwork OS/2 Access Feature for OS/2 Warp, * * Version 5 (prerequisite product) * * * * APAR: Multiple APAR fixes, see below. * * * * * * * * This package contains APAR fixes to the product above. This * * package can be distributed to anyone who has a license for * * this product. * * * ********************************************************************* PREREQUISITES : IBM eNetwork OS/2 Access Feature for OS/2 Warp, _____________ Version 5 CSD WR09000 (Base level) This AFA5038 package supersedes AFA5028, AFA5018, and AFA5027. PROBLEMS FIXED: ______________ APARS added by AFA5038: IC21471 UNABLE TO CONNECT PCOM 4.2 FOR OS/2 VIA TWINAX THROUGH A 5494 CONTROLLER TO AN AS/400. JR11838 SENSE CODE 08090000 RESPONSE FROM VTAM ON A REQACTPU VIA DLUR FROM PCOMM CAUSING CPSVRMGR PIPE TO FAIL AND UNBIND. JR11931 EURO SUPPORT FOR CONVERT API. JR11942 CS/2 V5.0 DOES NOT UPDATE LU6.2 INFORMATION IN APPN DIRECTORY WHEN USING AN HPR LINK JR11971 SYS3175 IN ACSAPPC/ACSAPLDR JR11988 INVALID SAB OVERLAY FOR ?ALERT RESULTS IN BAD ALERT WITH 22 'S WHERE CONTROL VECTOR 92 SHOULD BE. INVALID ALERT UNREADABLE. JR11989 SESSION LOCK UP WHEN API "DEACTIVATE DLC" IS RUN WHILE LINK IS BEING ACTIVATED JR12039 SYS3175 TRAP IN ACSRUI16.DLL CS:EIP=F60F:0000B651 CSLIM=0000CB8F JR12047 SNS0806002F AFTE INSTALLATION OF CSA5028 JR12075 HELP NOT WORKING PROPERLY AFTER APPLYING FIX CSA4128, CSA5028, AFA5028, OR AFA4128 ON NON-ENGLISH SYSTEMS. JR12107 SDLC LINK STAYS PENDING ACTIVE WHEN CABLE NOT ATTACHED TO ARTIC CARD AND PROTOCOL.INI IS MIS-CONFIGURED. JR12203 HPR PROBLEMS JR12242 CS/2 LUA SLI_OPEN REJECTED SESSION_ALREADY_OPEN FOLLOWING HOST SHUTD REQ AND CS/2 SHUTC -RSP (08390000) APARS added by AFA5028: JR11668 REXX0040 ERROR 40 RUNNING C:\CMLIB\CNOS2.CMD INCORRECT CALL TO ROUTINE CNOS JR11683 TRAP AND "UNLOCKED STORAGE IN USE" JR11693 INVALID COMMON SERVICES RETURN CODE RECEIVED. JR11707 REXXSNA REMOTE DISPLAY FAILURE IN CS/2 5.0, WORKED IN CS/2 4.1 JR11716 FAILURE ON DOSSUBALLOCMEM. JR11743 DISPLAY VERB - SESS_OVERLAY SESS_ENTRY_LEN FIELD IS SET TO 44 RESULTING IN THE BUFFER NOT CONTAINING CORRECT DATA AFTER L'44 JR11752 VTAM REJECTS BIND WITH SENSE 088C4683 FROM CS 5.0 JR11770 1016000B ISSUED BY CS DURING XID PROCESSING TO PCOM 4.0 DOS CLIENT JR11825 EXITING CMSETUP CAUSES FALSE DYNAMIC UPDATE ERROR, APN0709E , TO BE LOGGED IN FFST/2. JR11839 LOGICAL LINKS DEFINED AS ACTIVATE_AT_STARTUP(NO) MAY FAIL ALLOCATE REQUESTS WITH SC FFFF0003. JR11854 CHANGE FDX TO HDX IN DATA TRANSMISSION MODE AFTER MIG FROM CM2 JR11862 VTAM REJECTS DLUR SESSION WITH 08A00008 WITH CONSOLE LOG REPORTING TDU ERRORS. JR11931 EURO SUPPORT FOR CONVERT API. JR11946 MAPPED CONVERSATION DATA COULD HANG SESSIONS. JR11947 USING ANYNET, A PACING ERROR, SENSE 20110000, OCCURS WHEN A CLEAR IS PROCESSED. JR11949 ANYNET PACING ERROR 20110000 OCCURS WITH CLEAR APARS added by AFA5018: JR11125 VERB ON COMPLETION QUEUE SHOWS RETURN CODE OF OPERATION INCOMPLETE JR11215 LAST NMVT SEGMENT LOST. JR11310 CS DIALED_NUMBER CCB MEMORY LEAK CAUSES ABEND IN APPC WHEN HUGE SEGMENT STORAGE IS EXHAUSTED USING OS/2 SMP WS JR11401 COMMUNICATIONS SERVER HANGS ON INACTIVE LINK WHEN SMP WS WITH MULTIPLE ADAPTERS AND LINKS DEFINED TO SAME HOST JR11411 087D0001 OCCURS ON LU-LU SESSIONS AFTER HPR PATH SWITCH TO AN ADJACENT DLUS. JR11416 CMR0268 DOS FUNCTION CALL FAILURES WITH LUA, ROPS AND USER APPS JR11435 32-BIT LUA/SLI APPLICATIONS USING 16-BIT SEMAPHORES FAILS ON SLI_RECEIVE WITH UNEXPECTED_DOS_ERROR, SECONDARY RC = 0006 JR11439 SYS3175 TRAP IN AF APPC CS:EIP=005B:1E1A005B CSLIM=1FFFFFFF JR11451 WITH HEAVY USAGE MAY GET CMR0337E (ALSO CMR0261E). JR11492 ACSSVCC.H DOES NOT CONTAIN SET_USER_LOG_QUEUE API SERVICE VERB JR11495 SYS3175 TRAP IN CS OS/2 ACCESS FEATURE MODULE MPTNDLC.DLL CS:EIP= CD57:00001266 CSLIM= 00001397 JR11513 CMFIX FAILS WHEN UPDATING A COMMUNICATIONS SERVER 4.0 CODE SERVER JR11514 32-BIT LUA/SLI APPLICATIONS USING 16-BIT SEMAPHORES FAILS ON SLI_RECEIVE WITH UNEXPECTED_DOS_ERROR, SECONDARY RC = 0006 JR11565 WHEN LUA ISSUES SLI_OPEN AND LUA SESSION IS ALREADY OPENED: LATER ATTEMPTS TO ISSUE SLI_CLOSE WILL FAIL TO POST. JR11572 CS DOES NOT ACTIVATE LOGICAL LINK WHEN USER ACTIVATES LU6.2 SESSION IF THE LINK ACTIVATION HAS ONCE FAILED. JR11574 CS SYNCPOINT ENABLEMENT FOR DB/2 CONVERSATION FAILURE CAUSES LU6.2 SESSION TO BECOME UNUSABLE. APPEARS AS ALLOC HUNG. JR11576 CMFIX DOESN'T UPGRADE CODE SERVER FOR CS/2 4.1 JR11589 START_TN62 API CALL FROM PM FAILS WITH TN62_ERROR AND TN62_CONFIGURATION_FILE_ERROR APARS added by AFA5027: JR10922 MEMORY LEAK IN ACSRUI.DLL AS SHOWN IN THESEUS UNDER CUST PROCESS JR10971 APPN USING INCOMING ONLY CALL DIRECTORY FOR AN OUTGOING CONNECTION. JR11018 CS/2 4.1 ALLOCATE FAILS PARAMETER CHECK BAD SECURITY JR11027 SYS3175 TRAP IN CMFIX.EXE USING /Q PARM CS:EIP= 005B:0001116D CSLIM= 1FFFFFFF JR11039 CS/2 FAILS TO RESPOND TO AN ACTLU(COLD) JR11042 CMR0177E-THE GATEWAY CANNOT CREATE AN IMPLICIT LU BECAUSE ALL LU NAMES HAVE BEEN USED. JR11044 AFTER SSCP TAKEOVER ADJ_CP_NAME CHANGES TO TRUE SSCP VS ADJ CP NAME IN NDF JR11052 F015 STACK_TOO_SMALL RUNNING DB/2 APPLICATION WITH CS ACCESS FEATURE JR11055 SYS3175 ACCESS VIOLATION CMKFMAPI.DLL JR11107 SESSION COUNT NEGATIVE JR11108 MULTIPLE HPR PROBLEMS FOUND AFTER GA JR11109 APAR TO DOCUMENT 2 SNA OVER IP PROBLEMS AFTER GA. JR11113 AFTER CM2 MIGRATE TO CS/2 VIA CID (W/ MPTS CID FIRST), REQUIRES MANUAL UPDATES TO CONFIG FILES IN ORDER TO STARTUP CS/2. JR11304 SENSE CODE 10145046 ISSUED RUNNING APING FROM BRANCH EXTENDER NODE, OR DOWNSTREAM END NODE, TO VTAM 4.4. JR11305 HPR0042, SENSE CODE A0010042 JR11306 HPR RETRANSMISSIONS WITH ERP OVER SLTG CONFIG - LAN DLC NOTE: You can find the complete APAR text via http://www.software.ibm.com/enetwork/commserver/support ___________________________________________________________________ INSTALLATION INSTRUCTIONS __________________________ NOTES This package of APAR fixes can be applied either to a target workstation or to a code server directory. This package of fixes can be applied to all language versions of eNetwork OS/2 Access Feature for OS/2 Warp, Version 5. PARTS IN THIS PACKAGE 9-01-98 1:19p 133 0 B05.ZIP 9-01-98 11:17a 508485 0 B12.ZIP 9-01-98 11:17a 171495 0 B13.ZIP 9-01-98 11:17a 17470 0 B16.ZIP 9-01-98 11:17a 44491 0 B18.ZIP 9-01-98 11:17a 27711 0 B21.ZIP 9-01-98 11:17a 561169 0 B22.ZIP 9-01-98 11:17a 102138 0 B24.ZIP 9-01-98 11:17a 11409 0 B29.ZIP 9-01-98 11:17a 44125 0 B38.ZIP 9-01-98 11:17a 17757 0 B42.ZIP 9-01-98 11:17a 146050 0 B44.ZIP 9-01-98 11:17a 168912 0 B45.ZIP 9-01-98 11:17a 307492 0 B46.ZIP 9-01-98 11:17a 272632 0 B50.ZIP 9-01-98 11:17a 103260 0 B53.ZIP 9-01-98 11:17a 60357 0 B75.ZIP 9-01-98 11:17a 6912 0 B91.ZIP 9-01-98 11:17a 177752 0 B95.ZIP 9-01-98 1:21p 2074 35 BUNDLE.LST afa5038.TXT EXECUTABLES UPDATED \cmlib\ACSAPLDR.EXE \cmlib\ACSHPRDD.SYS \cmlib\HPRSTATS.EXE \cmlib\CMCONNS.EXE \cmlib\DISPLAY.EXE \cmlib\PMDSPLAY.EXE \cmlib\ACSLANDD.SYS \cmlib\FIXSVR.EXE \cmlib\CMFIX.EXE \cmlib\PKZIP2.EXE \cmlib\CMDIALST.EXE \cmlib\CPT2CCP.EXE \cmlib\rckesp.exe \cmlib\REDIRECT.EXE \cmlib\remmain.exe \cmlib\dll\ACSAPPC.DLL \cmlib\dll\ACSRUI.DLL \cmlib\dll\ACSRUI16.DLL \cmlib\dll\ACSSLI.DLL \cmlib\dll\ACSSVC16.DLL \cmlib\dll\ACSSVC.DLL \cmlib\dll\HPR.DLL \cmlib\dll\ACSMPTN.DLL \cmlib\dll\RPMSGLU.DLL \cmlib\dll\RPSMAIN.DLL \cmlib\dll\TCPPMM.DLL \cmlib\enus\ANYSTR2.DLL \cmlib\dll\RPDHDLR.DLL \cmlib\dll\TN62API.DLL \cmlib\dll\ACDI16.DLL \cmlib\dll\ACSARF.DLL \cmlib\dll\ACSGCBLD.DLL \cmlib\dll\ACSHPRDL.DLL \cmlib\dll\appncfg.dll \cmlib\dll\APPNCFG4.dll \cmlib\dll\appnutl.dll \cmlib\dll\cpicobol.dll \cmlib\dll\REMAPI.DLL \cmlib\dll\REXXSNA.DLL \cmlib\FMTTRACE.EXE \cmlib\RDSPSRVR.EXE \cmlib\dll\DLURDLC.DLL \cmlib\dll\APPC.DLL \cmlib\CMDISCS.EXE \cmlib\NN.EXE \cmlib\ACSSBMGT.EXE \cmlib\DISCSERV.EXE \cmlib\dll\CPIC.DLL \cmlib\dll\WCMWMSG.DLL \cmlib\dll\NSDW.DLL \cmlib\dll\CMQWAPI.DLL \cmlib\dll\WCMUTILS.DLL \cmlib\dll\MPTNCMM.DLL \cmlib\ACSTRACE.EXE \cmlib\CMPD.CMD \cmlib\CMPD.PAK CMFIX (APPLY SOFTWARE UPDATES) Displays a panel that enables you to apply software updates from a local drive, a LAN-attached drive, or from the Internet. To execute CMFIX, you can select the Software Update icon in the Problem Determination folder, or you can run CMFIX from an OS/2 command line. CMFIX applies software updates (APARs or PTFs) to a target workstation and/or a code server. A code server is a locally or LAN-accessible server that contains a directory of the installable OS/2 Access Feature image. We will discuss the two installation methods, "Using CMFIX to Update a Code Server" and "Using CMFIX to Update a Single Target Workstation," later in this section. CMFIX also creates a file called CM2APAR.LOG on the machine that executes CMFIX. This file contains CMFIX messages. OBTAINING THE LATEST LEVEL OF CMFIX The most recent version of CMFIX is available from the following FTP site: ftp://ps.software.ibm.com/ps/products/cm2/fixes/v5cmfix Please obtain the latest version of CMFIX before installing any APAR fix package. RUNNING CMFIX FROM THE COMMAND LINE When running CMFIX from an OS/2 command prompt, use the following syntax: Syntax >>--þ--.-------.--.------.--CMFIX-----------------------> '-drive-' '-path-' >--.----------------------.--.----.--.---.------------->< -/A--location--.----.- '-/Q-' '-?-' '-/B-' -/D------------------- '-/U-------------------' Note: Running CMFIX from the command line will not update a code server. Parameters drive The drive where the CMFIX.EXE file resides. Specify a drive if it is not the drive you are currently using. path The path where the CMFIX.EXE file resides. Use this parameter if the file is not in the path you are currently using. /A location Applies an update from the local or LAN-attached drive location. This drive must be directly accessible from your workstation. When you specify the location of the update, use the form "d:\path". /B Creates a backup of the changed files. /D Deletes a previously created backup. /U Uses a previously created backup to remove an applied update. /Q Suppresses all messages. A progress indicator is displayed requiring no operator intervention. ? Displays syntax information describing the available options. Remarks Refer to the online help for detailed information about each feature. Examples To display a panel where you can specify the location of an update and choose whether to install or remove an update, use the following statement: CMFIX To install a software update located on m:\updates, use the following statement: CMFIX /A m:\updates To view the syntax for CMFIX, use the following statement: CMFIX ? USING CMFIX TO UPDATE A CODE SERVER This is the recommended method to apply APAR fix packages to OS/2 Access Feature V5. By following these instructions, you will have a new, updated version of OS/2 Access Feature V5 in a "code server" directory. You can then use the code server directory when installing new workstations. 1. CREATE A CODE SERVER DIRECTORY. A code server is a locally or LAN-accessible server that contains a directory of the installable OS/2 Access Feature image. To create a code server, if you have not already done so, follow these steps: a. Create a code server directory, such as AFSERVR\CODE. b. Use XCOPY to copy all the files from the \CLIENTS\OS2\WARPAF directory on the OS/2 Access Feature CD-ROM to the code server directory you created in Step 1a. For example, change directories to \CLIENTS\OS2\WARPAF on the OS/2 Access Feature CD-ROM and type: XCOPY *.* Q:\AFSERVR\CODE /s to copy the files. 2. EXECUTE CMFIX TO UPDATE THE CODE SERVER DIRECTORY. a. Execute CMFIX by selecting the Software Update icon in the Problem Determination folder, or running CMFIX from an OS/2 command line. b. Select the "Apply to Code Server" checkbox. c. For "Software Update Source," choose either "Local" or "Internet." "Local" means the APAR fix package is on an attached drive, and "Internet" means the package is on the IBM Internet site. d. Select the "Find" pushbutton, select the APAR fix package location, and highlight the BUNDLE.LST file. Select "OK." Then, select "OK" from the "Software Update" window. You will be prompted for the location of your code server directory. e. Close the "Software Update" window. f. Check the file cm2apar.log for any errors that may have occurred in the update process. This procedure is explained in the CMFIX online helps. Invoke CMFIX, select the Help button, and then select F2. 3. EXECUTE CMSETUP TO UPDATE OS/2 ACCESS FEATURE WORKSTATIONS. a. On the OS/2 Access Feature that you want updated, execute CMSETUP from the code server directory. For example: Q:\AFSERVR\CODE\CMSETUP b. Follow the normal installation process until the "Refresh Product Files" window appears. Select the REINSTALL option to update your workstation with the fixes. USING CMFIX TO UPDATE A TARGET WORKSTATION Use this method if you would like to update a single OS/2 Access Feature V5 workstation. If you add additional functions to your configuration, you will need to reapply any APAR fix packages, because CMSETUP will pull the new code from the directory where the install was executed. This will overlay any fixes previously applied. Only files that are older than the fixpack files being applied will be updated. If you use a code server, you do not need to reapply the fixes. Using the code server is the recommended method for updates. 1. EXECUTE CMFIX TO UPDATE THE WORKSTATION. a. Execute CMFIX by selecting the Software Update icon in the Problem Determination folder, or running CMFIX from an OS/2 command line. b. Select the "Apply" radio button; optionally, select the "Create Backup" checkbox. c. For "Software Update Source," choose either "Local" or "Internet." "Local" means the APAR fix package is on an attached drive(*), and "Internet" means the package is on the IBM Internet site. (*) the fix was downloaded manually from the IBM Internet site, rather than via CMFIX. d. Select the "Find" pushbutton, select the APAR fix package location, and highlight the BUNDLE.LST file. Select "OK." Then, select "OK" from the "Software Update" window. e. Close the "Software Update" window. f. Check the file cm2apar.log for any errors that may have occurred in the update process. This procedure is explained in the CMFIX online helps. Invoke CMFIX, select the Help button, and then select F2. IBM COPYRIGHT INFORMATION _________________________ IBM eNetwork OS/2 Access Feature for OS/2 Warp, Version 5 (c) Copyright International Business Machines Corporation 1988, 1996, 1998. All rights reserved. Note to U.S. Government Users - Documentation related to restricted rights - Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp. LIMIT OF LIABILITY __________________ License to the contained APAR fixes is conditioned upon the recipient holding a license to the prerequisite product. The license terms and conditions of the APAR fixes are the same as those for the prerequisite product. Please see the product license for specifics.