WR20636C's directory contains the updates for PTF WR20636 to a code server.  This is a collection
of APAR fixes and product updates that can be applied to Communications Server for OS/2 Warp V4.

See fixes.txt in this directory for a list of APARs.


NOTE:
This PTF can ONLY be applied to the English version of Communications Server.
 
 
In order to install and configure the new functions of Communications Server,
a code server is needed.  A code server is basically a directory that is
accessible to a workstation that will be installing Communications Server.
The directory can be either local or available using a LAN.

To create a code server for Communications Server (if you do not already have one):

  1. Create a "code server" directory such as COMMSVR\CODE.
  2. Copy all the files from the \SERVER directory on the Communications
     Server CD-ROM to the COMMSVR\CODE directory using XCOPY.  For
     example, in the \SERVER directory on the CD-ROM, issue:
     XCOPY *.*  Q:\COMMSVR\CODE /s
      
How to install the Communications Server PTF WR20636 to a code server using
updates from the Internet.

  1. Download PTF WR20636 from the WR20636C directory on
     ftp://ps.software.ibm.com/ps/products/cm2/fixes/v4server
     to a local directory such as CSTEMP.

     Note that, WR20636C contains the files tailored for application to a
     code server.  WR20636 contains files tailored for application by CMFIX.
     DO NOT attempt to use CMFIX to apply WR20636C or attempt to use WR20636
     to update a code server; the two are not interchangable.
   
  2. Use XCOPY to copy the files from CSTEMP into your code server
     directory.  For example, in the \CSTEMP directory, issue:
     XCOPY *.*  Q:\COMMSVR\CODE /s

The code server is now updated.  This code server should be used as the source
for all updates to a Communications Server installation.  For example, if you
configure a feature after the initial installation, when prompted for the
location of the Communications Server files, point to the code server.

Configuring the new TN3270E Server
  1. In the code server directory, issue CMSETUP.  For example,  Q:\COMMSVR\CODE\CMSETUP.
     When prompted on the "Refresh Product Files" window, choose "REINSTALL" to allow the
     fixes to be appiled.

  2. Choose the SETUP push button, from the CMSETUP window.  Select TN3270E from the
     menu bar of the Communications Manager Configuration Definition window.

The README.INF in the WR20636C directory contains additional information about
the new TN3270E function.

Thanks for using the TN3270E Server of Communications Server!



Last update: 8/27/96 RHB