IBM Rational Developer for i, V7.5.0.6 Readme

©Copyright International Business Machines Corporation 2000, 2010. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Contents

1.0 About this fix pack

2.0 Installation information
    2.1 Hardware requirements
    2.2 Software requirements
    2.3 Other requirements
    2.4 Installation instructions

3.0 Fixes contained in this fix pack

4.0 Known limitations, problems, and workarounds

5.0 IBM Rational Software Support
    5.1 Posting questions to a newsgroup

6.0 Notices and trademarks

1.0 About this fix pack

The IBM® Rational® Developer for i, Version 7.5.0.6 fix pack contains fixes to version 7.5.

The latest version of this document (English only) is available at the following address:
http://public.dhe.ibm.com/software/awdtools/rdi/v75/7506/documents/readme/readme.html

Version 7.5.0.5 of this readme file (English only) is available at the following address:
http://public.dhe.ibm.com/software/awdtools/rdi/v75/7505/documents/readme/readme.html

Version 7.5.0.3 of this readme file (English only) is available at the following address:
http://public.dhe.ibm.com/software/awdtools/rdi/v75/7503/documents/readme/readme.html

Version 7.5.0.2 of this readme file (English only) is available at the following address:
http://public.dhe.ibm.com/software/awdtools/rdi/v75/7502/documents/readme/readme.html

Version 7.5.0.1 of this readme file (English only) is available at the following address:
http://public.dhe.ibm.com/software/awdtools/rdi/v75/7501/documents/readme/readme.html

Version 7.5 of this readme file (English and translations) is available at the following address:
http://public.dhe.ibm.com/software/awdtools/rdi/v75/75/documents/readme

2.0 Installation information

This section describes the installation requirements and specific installation instructions for this fix pack.

For information about installing IBM Rational Developer for i, Version 7.5, including hardware and software requirements, see the Installation Guide. The English and translations of the Installation Guide are available at the following address:
http://public.dhe.ibm.com/software/awdtools/rdi/v75/75/documents/install_instruction

2.1 Hardware requirements

There are no additional processor or memory requirements for installing this fix pack. However, there might be additional disk space requirements if you install the fix pack at the same time that you install IBM Rational Developer for i, Version 7.5, or if you are installing the fix pack as an update:

If you choose to download the update as a compressed file for local installation, approximately 1.2 GB is required to store and extract the compressed file.

2.2 Software requirements

This section describes the additional software requirements for installing IBM Rational Developer for i, Version 7.5.0.6. For more information about the requirements for installing IBM Rational Developer for i, Version 7.5, see the Installation Guide.

Before installing this fix pack, you must install IBM Installation Manager, Version 1.3.3. If you attempt to update or install packages using an earlier version of Installation Manager, by default, version 1.3.3 is automatically installed on your computer.

2.3 Other requirements

Internet access is required unless you download the compressed file containing the IBM Rational Developer for i, Version 7.5.0.6 fix pack. By default, the update is located and installed by Installation Manager directly from the IBM update repository for IBM Rational Developer for i, Version 7.5.0.6.

Important: When IBM Rational Developer for i is installed, the location of its update repository is automatically embedded in Installation Manager. For Installation Manager to search the default update repository, the preference Search the linked repositories during installation and updates must be selected on the Repositories preference page. This preference is selected by default.

To install the fix pack from a different repository location (for example, if the fix pack is available on a shared drive or HTTP or HTTPS server), you must add the repository location in Installation Manager. To add a repository location, perform the following steps:

  1. Start Installation Manager.
  2. On the Start page of Installation Manager, click File > Preferences, and then click Repositories. The Repositories page opens.
  3. On the Repositories page, click Add Repository.
  4. In the Add repository window, type the URL of the repository location, or browse to it and select a file path, and then click OK.
  5. Click OK to close the Preference page.

2.4 Installation instructions

The two common ways to install this update are as follows:

By default, the update is installed directly from the IBM update repository; however, it is also available for download. For details, see the specific installation instructions noted below for IBM Rational Developer for i, Version 7.5.0.6.

2.4.1 Installing IBM Rational Developer for i, Version 7.5.0.6 as an update

Install the fix pack with the same user account that installed the product.

Restrictions:

To find and install IBM Rational Developer for i, Version 7.5.0.6 as an update:

  1. Start IBM Installation Manager.
  2. On the Start page of Installation Manager, click Update.
  3. If a new version of Installation Manager is found, you are prompted to confirm that you want to install it before you can continue. Click OK to proceed. Installation Manager automatically installs the new version, stops, restarts, and then resumes.
  4. In the Update packages wizard, select the Installed Location for IBM Rational Developer for i, and then click Next. Installation Manager searches for updates in the IBM Rational Developer for i repository on the Web as well as in any repository locations that you entered. A progress indicator shows that the search is taking place.
  5. By default, recommended updates are displayed and selected on the Update Packages page. Ensure that you select Version 7.5.0.6 for IBM Rational Developer for i, and then click Next.
  6. On the Licenses page, read the license agreements for the update. On the left side of the License page, click each item to display the license agreement text.
    1. If you agree to the terms for all of the license agreements, click I accept the terms of the license agreements.
    2. Click Next to continue.
    3. On the Summary page, review the displayed information, and then click Update. A progress indicator shows the percentage of the installation completed.
  7. When the update process is completed, a message confirming the success of the process is displayed near the top of the page. Click View log file to open the log file for the current session in a new window. Before continuing, you must close the Installation Log window.
2.4.2 Downloading the fix pack for local installations

You can download the compressed file containing the IBM Rational Developer for i, Version 7.5.0.6 fix pack. The extracted files form a repository for the fix pack. You can install the fix pack from the repository on your own computer, or you can copy the repository to a shared drive or an HTTP or HTTPS server.

To download and install the fix pack, complete the following steps:

  1. Download the fix pack from the following address:
    http://public.dhe.ibm.com/software/awdtools/rdi/v75/7506/zips/rdi-7.5.0.6.zip
  2. Extract the compressed file into an appropriate directory. For example, extract the file to C:\temp. After you extract the file, the directory contents are as follows: C:\temp\rdi\updates\<extracted-files>
  3. Add the fix-pack repository location in IBM Installation Manager:
    1. Start IBM Installation Manager.
    2. On the Start page of Installation Manager, click File > Preferences, and then click Repositories. The Repositories page opens.
    3. On the Repositories page, click Add Repository.
    4. On the Add repository window, browse to, and then enter the file path to the rdi\updates directory. For example, enter C:\temp\rdi\updates\repository.config, and then click OK.
    5. Click OK to close the Preference page.
  4. Install the fix pack as described previously in this document.

    Note: During the process of updating from a local repository, Installation Manager might prompt you for the location of the repository for IBM Rational Developer for i, Version 7.5. If you installed the product from CDs or other media, this media must be available when you use the update feature.

3.0 Fixes contained in this fix pack

The following corrections have been included in this fix pack.

4.0 Known limitations, problems, and workarounds

This section describes known limitations and problems specific to this fix pack and any workarounds that are available.

Updates, limitations, and known problems about IBM Rational Developer for i, Version 7.5.0.6 are documented in the library on the product Web site.

As limitations and problems are discovered and resolved, the IBM Software Support team updates the knowledge base. By searching the knowledge base, you can quickly find workarounds or solutions to problems that you experience. The Support section of the IBM Rational Developer for i Web site enables you to create a customized search of the live Support knowledge base. To narrow your search, specify 7.5.0.6 as the search term.

5.0 IBM Rational Software Support

IBM Software Support provides you with technical assistance.

For contact information and guidelines or reference materials that you will need when you require support, read the IBM Software Support Handbook.

For more information about product news, events, support, FAQs, lists of known problems and fixes, and other support information, visit the IBM Rational Developer for i product Web site.

Before you contact IBM Software Support, gather the background information that you will need to describe your problem. When describing a problem to an IBM software support specialist, be as specific as possible. Include all relevant background information so that the specialist can help you solve the problem efficiently. To save time, know the answers to the following questions:

5.1 Posting questions to a newsgroup

To post your questions on a newsgroup, use the following resources:

Other suggested forum: lists.midrange.com/mailman/listinfo/wdsci-l

6.0 Notices and trademarks

This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this documentation in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service.

IBM may have patents or pending patent applications covering subject matter described in this documentation. The furnishing of this documentation does not give you any license to these patents. You can send license inquiries, in writing, to:

IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.

For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to:

IBM World Trade Asia Corporation
Licensing
2-31 Roppongi 3-chome, Minato-ku
Tokyo 106, Japan

The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk.

Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact:

Intellectual Property Dept. for Rational Software
IBM Corporation
3600 Steeles Avenue East
Markham, Ontario
Canada L3R 9Z7

Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee.

The licensed program described in this documentation and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us.

Any performance data contained herein was determined in a controlled environment. Therefore, the results obtained in other operating environments may vary significantly. Some measurements may have been made on -level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.

Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.

All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only.

This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples may include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental.

Trademarks and service marks

The following terms are trademarks of the IBM Corporation in the United States or other countries or both:

Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both.

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.

Intel, Intel logo, Intel Inside, Intel Inside logo, Intel Centrino, Intel Centrino logo, Celeron, Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.

Other company, product, or service names may be trademarks or service marks of others.