====================================================================== Microsoft(R) Product Support Services Application Note (Text File) WA0941: MICROSOFT MAIL REBUILD.EXE VERSION 3.2.4 UPDATE ====================================================================== Revision Date: 12/93 1 Disk Included The following information applies to Microsoft Mail for PC Networks, version 3.2. ----------------------------------------------------------------------- | INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY | | ACCOMPANY THIS DOCUMENT (collectively referred to as an Application | | Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER | | EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED | | WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR | | PURPOSE. The user assumes the entire risk as to the accuracy and | | the use of this Application Note. This Application Note may be | | copied and distributed subject to the following conditions: 1) All | | text must be copied without modification and all pages must be | | included; 2) If software is included, all files on the disk(s) | | must be copied without modification (the MS-DOS(R) utility | | diskcopy is appropriate for this purpose); 3) All components of | | this Application Note must be distributed together; and 4) This | | Application Note may not be distributed for profit. | | | | Copyright (C) 1993 Microsoft Corporation. All Rights Reserved. | | Microsoft and MS-DOS are registered trademarks and Windows is a | | trademark of Microsoft Corporation. | | Macintosh is a registered trademark of Apple Computer, Inc. | |---------------------------------------------------------------------| Introduction ------------ The disk provided with this Application Note contains REBUILD.EXE, a replacement for the REBUILD.EXE file that is included with version 3.2 of Microsoft Mail for PC Networks. This replacement file corrects a problem that occurs on MS-DOS and Macintosh(R) workstations when the GALNETPO.GLB file is regenerated while REBUILD.EXE is running. To Replace Your REBUILD.EXE File -------------------------------- 1. Insert the enclosed WA0941 disk in your floppy disk drive. 2. At the MS-DOS command prompt, type the following and press ENTER copy :\rebuild.exe where is the floppy disk drive containing the WA0941 disk and is the drive and directory where your REBUILD.EXE file currently resides. For example, if REBUILD.EXE is located in the MAILEXE directory on drive C and the WA0941 disk is in drive A, type the following command: copy a:\rebuild.exe c:\mailexe A message will be displayed stating: 1 file(s) copied. This indicates that your REBUILD.EXE file has been successfully replaced. NOTE: The REBUILD.EXE file typically resides on the postoffice server in the Mail executables directory as well as on the machine importing addresses into the database. Make sure you update all copies of REBUILD.EXE.