ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º WWIV4XX.W95 - A guide to get WWIV the most performance from Windows 95! º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ³ WWIV v4.24a ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; Written by Paul Winfree (A.K.A. Razorblade). Copyright (c) 1996 by Wayne Bell for WWIV Software. Copyright (c) 1996 by Microsoft for Windows 95. (Revised 08-15-96) Welcome to WWIV v4.24a under Windows 95! ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ At this time, my computer is made by Gateway 2000, 486dx66mhz, 48mb of RAM, 2 Usr Robotic Sportster 14.4, 1 Zoom 14.4 & Wireless Microsoft Mouse. These are the Settings I use to run 3 dial-in lines and one local Instance under Microsoft Windows 95 (Also referred to as Win95). I have posted comments throughout this file to help you along the way. Extensive testing has been done with these settings on my system as well as a number of others to ensure you get the most performance out of Win95. Let me know if these settings help you! These settings have been proven to work well under Win95. Windows time-slicing is quite good, therefore I am not recommending any program for timeslice conversion at this time. Please stay tuned, as this may change in time. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Please note that if you choose to use these settings for Win95, you are º º STRONGLY urged to use these settings for ALL of your Win95 DOS sessions.º º Doing this will assure you are getting the most performance possible º º under Windows 95. º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Also note that even though this text file contains items that will likely generate a considerable performance boost for your system, I do not recommend any settings that would put the stability of your Win95 system at risk. I do not use any undocumented commands, and none of my modifications pose any risk to system stability whatsoever. You can be assured that testing these settings will pose no threat to Win95's stability. Extensive testing has been done to assure stability, no matter what type of DOS-Based BBS software you run. First off, here's a look at what you'll need in your CONFIG.SYS and AUTOEXEC.BAT in order to get your BBS running in to shape: ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ CONFIG.SYS - ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DEVICE=C:\WINDOWS\HIMEM.SYS /TESTMEM:OFF NOTES: This line loads the memory management driver for Windows 95. You'll notice there is NO NEED to load EMM386 anymore. Windows 95 handles all of this for you now. If you are using WWIVCHAT v3.22d then Ramdrive are needed to support WWIVCHAT v3.22. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DEVICE=C:\WINDOWS\EMM386.EXE RAM NOTES: This line support Ramdrive.sys loaded in. It is required if you have WWIVCHAT V3.22d. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ BUFFERS=32,0 NOTES: Allocates memory for a specific number of disk buffers when your systems start. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ FILES=200 NOTES: Win95 uses a LOT of file handles. So does WWIV v4.24a. Set this number high. 200 is an excellent choice. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DOS=HIGH,UMB NOTES: Loads DOS high and into upper memory. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ STACKS=9,256 NOTES: Support the dynamic use of data stacks to handle hardware interrupts ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ LASTDRIVE=Z NOTES: Tells DOS the last drive letter available for use. Leave it at Z. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DEVICEHIGH=C:\WINDOWS\RAMDRIVE.SYS 512 /A NOTES: Uses part of your computer's random-access memory (RAM) to simulate a hard disk drive. This is required if you are using WWIVCHAT v3.22d. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SHELL=C:\COMMAND.COM C:\ /P /E:2048 NOTES: VERY IMPORTANT! This sets the command interpreter to use as well as the environment size. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DEVICE=C:\WINDOWS\COMMAND\ANSI.SYS Loads the ANSI driver so you can view callers in doors. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ That's it for the CONFIG.SYS - 10 lines! Now for the AUTOEXEC.BAT: ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ AUTOEXEC.BAT - ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ @ECHO OFF Turns off the echoing of commands to the screen as they load. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ LH C:\WINDOWS\COMMAND\DOSKEY /INSERT NOTES: Loads DOSKEY command macro editor. This particular command tells doskey to turn on the Insert key so that when you recall commands at the DOS prompt using the Up/Dn arrow keys, it will automatically insert your new modifications instead of overwriting. If you would rather it default to overwriting, remove the /INSERT parameter. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ PROMPT $P$G Sets what the prompt should look like. This will produce the C:\> prompt. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SET PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;C:\DOS;C:\;E:\WWIV The Paths that Windows will search for programs. You can place any directory you want in your path. Make sure your main BBS directory (In this case C:\WWIV) is in the path. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SET DIRCMD=/O/P This will sort the directory listings and place them in alphabetical order, directories first. The /P pauses the list after each screenful of info. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SET COMSPEC=C:\WINDOWS\COMMAND.COM Sets the path to the command interpreter for programs that need it. Windows 95 LIKES to REM this out during the upgrade process. Make SURE you remove the REM after upgrading. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ You are all done for now! If you are using the BNU or X00 Fossil drivers. I recomend you to rem it either in Config.sys or Autoexec.bat. It does not run too well under Win95. Get WinFOSSIL driver and install it under the Windows. Follow the directions from there on how to use it. If you don't have the WinFOSSIL driver. You can call my board and download a file called "WNFOS112.ZIP". I will re-write more details in the future about how to setup the Vfossil driver in DOS under Win95. I have not use the "@CALL" with the Vfossil driver since I have no problem running doors. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Now, it's time to make some necessary changes to your modem profiles and COM ports that Win95 uses. First, let's take care of the COM ports: ÄÄÄÄÄÄÄÄÄÄ¿ Step 1 - ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Click on "My Computer", then click "Control Panel", then open the "System" icon. When "System Properties" appears, click on the "Device Manager" tab. You will now see a list of all of your hardware. ÄÄÄÄÄÄÄÄÄÄ¿ Step 2 - ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Go down to the "Ports (COM and LPT)", and click on the "+" sign to the left of it. You will now see a list of all of your COM and LPT ports. The LPT ports no NOT need to be modified, so ignore them. The COM ports however, do. Please make the following changes to all of your COM ports: ÄÄÄÄÄÄÄÄÄÄ¿ Step 2a - ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Click on your first COM port (usually Communications Port 1), now click on the "port settings" tab. Set "Baudrate" to 38400. Leave the Data bits, stop bit, and parity selections at their defaults of "8, None, 1". Set your "Flow control" to "Hardware". Click on OK to save those changes. Leave all other selections at their default values. ÄÄÄÄÄÄÄÄÄÄ¿ Step 3 - ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Repeat the process for ALL of your COM ports. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º TIP: Win95 provides an excellent utility to view which IRQ's are º º currently being used. To view them, click on the "Computer" icon º º under system properties --> device manager. º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Next, it's time to make changes to our modem profiles. Exit back out to the contol panel, and click on "Modems". You will see the "Modems properties" page. Make the following changes to each of your modems: Set the Baudrate to 38400. Repeat this for each modem you have set-up under Win95. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ To get your BBS up from the start-up. ÄÄÄÄÄÄÄÄÄÄ¿ Step 1 - ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Click on "Start", then click "Setting", then open the "Taskbar". When "Taskbar Properties" appears, click on the "Start Menu Program" tab. ÄÄÄÄÄÄÄÄÄÄ¿ Step 2 - ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Click on "Add" Button, then click "Browse" Button, Find your WWIV start-up batch files. My BBS start-up batch file is E:\WWIV\WWIV.BAT. Your will be different. ÄÄÄÄÄÄÄÄÄÄ¿ Step 3 - ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Click on "Next" Button, Find "Startup" Folder then click on it, then click "Next" Button, Make sure that is the right execute file you gonna use then click "Next" Button, Choose your favorite icons then click "Finish". ÄÄÄÄÄÄÄÄÄÄ¿ Step 4 - ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Since this is designed for multi-tasking board. I have 4 batch files to load. Repeat the process for ALL of your batch files. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Return to "Taskbar Properties". Click on "Advanced", then click "Programs" folder, then click "StartUp" folder. What follows are the settings for your Win95 DOS Sessions. These are accessed by right-clicking on the icon that is set up to load your BBS Instances, and then selecting "properties". If you have multiple Instances, you will need to modify the properties for each of your sessions: ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Tab 1 - General: ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Tab 1 Gives information about the program itself. No modification needs to be done to this page. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Tab 2 - Program: ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ To the Right of the icon, there is a space to enter in the name that you want displyed on the title bar when this session is running. An example for Instance 1 would be your BBS name and node number (Winfree's Lair #1). Cmd Line.....: E:\WWIV\WWIV.BAT This is where you will place the path and filename of the batch file that you are using to start each of the BBS Instance with. Working......: E:\WWIV Provides a space for you to type the name of the folder that this program will load files from, and where it will save files. If necessary, include the drive letter. This is also where items such as temporary files are created for this program. You can use any directory that you wish, however it is a good idea to use the same directory for all of your DOS sessions, to make cleanup easier if need be. Batch File...: None Shortcut Key: None Provides a space for you to define a keyboard shortcut to start or switch to this program from Windows. Shortcut keys must include CTRL and/or ALT and another key (for example, CTRL+Y). You cannot use ESC, ENTER, TAB, SPACEBAR, PRINT SCREEN, or BACKSPACE. No other program can use this key combination. If the shortcut key conflicts with an access key in a Windows-based program, the access key will not work. Run: Minimized This will place all of your BBS hidden in Auto Hide Bar. It's nice not to see your BBS across your monitor when you are working other Application. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Tab 3 - Font: ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ This is where you specify what font you would like to use when displaying this session in a window, either by starting it windowed, or by using ALT-ENTER. Both Type Font & Font Size "Auto" is what I use, however the choice is up to you. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Tab 4 - Memory: ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Set Conventional Total to Auto Set Initial Environment to Auto EMS Total to 1024 XMS Total to 1024 MS-DOS protected mode to Auto Place a check in the box "Uses HMA" under "Extended" (XMS) Memory. Do NOT place a check in the "Protected" Box. Having "Protected" checked only seems to slow the session down, and does not seem to provide any greater level of protection than when it is turned on. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Tab 5 - Screen: ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Usage - This is the setting for how you want this program loaded. Choose full-screen or window. Initial size should be set at "Default". Window and Preformance - Display toolbar, restore settings on startup, fast ROM emulation, and dynamic memory allocation should all be checked. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Tab 6 - Misc: ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Allow screen saver, QuickEdit, Exclusive Mode, Always Suspend, and warn if still active should NOT be checked. Idle Sensitivity - Set it to Low. Move the slider as far to the left as you can. Fast pasting - should be checked. All of the Windows Shortcut keys should be checked. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ You are all set for Instance #1. If you have more than Instance #1 then you should do the same step by step like above. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ After you are done with the multi-board Batches above. The last thing for the Local Sysop BBS Batches. My 4th Batches for my own logon is changed little bit differently. Look at TAB #4 and follow it below. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Tab 4 - Memory: ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Set Conventional Total to Auto Set Initial Environment to Auto EMS Total to 4069 XMS Total to 4069 MS-DOS protected mode to Auto Place a check in the box "Uses HMA" under "Extended" (XMS) Memory. Do NOT place a check in the "Protected" Box. Having "Protected" checked only seems to slow the session down, and does not seem to provide any greater level of protection than when it is turned on. That's it! All of the DOS settings are taken care of. ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ IMPORTANT: If you are running WWIV 4.xx under Win95, you will need to ³ ³ make a change to your modem's MDM file that WWIV uses. This will allow ³ ³ WWIV to run as efficiently as possible. If you are running other DOS BBS ³ ³ software, and you also have the ability to modify a setting similar to ³ ³ this, please do so. ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Specific to users of WWIV/DOS 4.10 and higher, and users of the WWIV 4.23 & above MultiLine Platinum ONLY - ------------------------------------------------------------------------ Digiboard support is not yet available for Windows 95. In near future, I will upgrade my modems to 4-COM with 3 external modems. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Additional Notes: More new tips and tricks become available all the time. I update this file on a regular basis to reflect new changes. Also, PLEASE keep this in mind: When you make a change to any DOS setting, make the appropriate canges to ALL of your DOS sessions. While this is time-consuming, it will result in a far-more stable and higher performance system. Please take the time to have all of your settings for all of your DOS sessions reflect what I have listed. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DISCLAIMER - I CAN'T BE RESPONSIBLE FOR WHAT YOU DO WITH YOUR SYSTEM OR YOUR CONFIG.SYS FILE BASED UPON WHAT YOU MAY LEARN FROM THE INFORMATION PROVIDED IN THIS FILE. EVERY EFFORT HAS BEEN MADE TO MAKE THIS FILE AS ACCURATE AS POSSIBLE, BUT NO WARRANTY IS EXPRESSED OR IMPLIED. THE INFORMATION IS PROVIDED ON AN "AS IS" BASIS. USE IT AT YOUR OWN RISK. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If you have any other questions, please let me know! I'll help if I can. If these settings do help you, let me know! Comments are always appreciated, positive or negative. If you notice anything I may have left out, or something you would like to see added to SETTINGS, please let me know! I can be reached at: WWIVnet - 1@12195 ICEnet - 1@7682 TERRAnet - 1@7682 Internet - pdw8915@rit.edu 1-7682@tnet.bluethun.com winfree@frontiernet.net Good Luck! Razorblade, Sysop Winfree's Lair Instance 1 (716) 359-3296 Instance 2 (716) 359-0922 Instance 3 (716) 334-3466 Instance 4 (Local) Sysop ONLY! ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Trouble Shooter ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1. Question: I have to re-boot my Win95 1 or 2 time per week after users made few calls. It's like that you have to re-boot every few users called your BBS. Answer: That's because the Memory or Ram LEAKS. It build's up the program every time the application been on for a period of time. There's a patch called "krnlupd.exe" from Microsoft. The path to pick up the patches is //http://www.microsoft.com/windows/software/krnlupd.htm ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 2. Question: The Question #1 did not solve problem. I need help now ASAP! Answer: I am so sorry that thing did not work-out for you. You must be a Register WWIV Sysop to have some modification on your Source Code. Your last choice to re-boot your BBS system. TOPAC07a.424 is written by Topac. He is a Regular WWIV Sysop that has given me permission to add his mods along this "Setting WWIV for Win95". ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º Mod File Name : TOPAC07a.424 Mod Author: Topac 3@6161 WWIVnet º º Difficulty : ²²±±±±±±±± [Pretty Simple] 3@4402 IceNET º º WWIV Version : 4.24+ SierraLink º º Mod Date : 29 MAY 96 TerraNet º º Files Affected: BBS.C 3@14402WWIVLink º º Description : Restarts remote node under Win95 º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ ============================================================================= This mod is writen for registered WWIV sysops. No one else has any business using it. In fact, they wouldn't have much use for it. If you're not registered, leave this be. ============================================================================= Extended Description: I had problems with my moded BBS under Win95. It would lock up after a couple of people called the baord. I figured that it might be due to memory leakage or something similar. I wrote this to "reboot" the DOS session the board runs in. To run this set up the board with a short cut called BBS1 (replace the 1 with the node number). In it have it call the BBS with BBS /O. After one caller, the BBS will quit, and start a new window with the BBS running in it. ============================================================================== Disclaimer: If it has sex with your cat or spills oil on your floor and it gets to the point you can't stand anymore. Send it to us we won't give a fig. We'll tell you, "Go stick your head in a pig!" -D. Adams ------------------------------------------------------------------------------ This code has been tested on my modified BBS. ============================================================================== If you do use this, please drop me a note, especially if you have any problems. This gives me a way of contacting people who use the mod with updates and information. I can be reached at 3@6161 WWIVNet @4402 IceNet @4402 SierraLink @4402 TerraNet @4402 Dragon*Net @7702 TFALink @ 702 AtlantaNet @14402 WWIVLink topac-4402@tnet.bluethun.com Topac's Moding Service: For even more information, I now host a sub that deals with moding in general, an my mods in particular. It is not autorequestable. The subtype is TOPMODS It is available on all of the above networks. ============================================================================== Guidelines: Back up your source before you start. This mod is set up so you can block copy everything into place. It's all set up so that it should be clear what is added and removed, so that it'll be easy to identify and remove the mod. In the mod things will be annotated as follows: //TOPAC07a.424 This marks a place where the mod is //TOPAC07a.424 Begin This marks the begining of a large block of the mod //TOPAC07a.424 End This marks the end of a large block of the mod /**/ This marks an addition //-- This marks something that'll be commented out. If there is a change in a line, I usually comment out the line and add the edited line. ============================================================================== Load BBS.C Search for 'wfc_label' and paste the following in. wfc_label: //TOPAC07a.424 /**/i=get_win_version(); /**/if ((ok_modem_stuff) && (ooneuser) && (i==4)) { /**/ sprintf(s,"start \\wwiv\\bbs%d.pif", instance); //NOTES: /**/ extern_prog(s, 0); /**/} cleanup_net(); ------------------------------------------------------------------------------ NOTES: You need to set the short cut up as BBS(node number). You may want to change the path depending on your set up. ============================================================================== In god we trust, all others pay cash. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 3. Question: I have too many button on TASKBAR. The Topac07a.mod works very good but there are too many button on TASKBAR. I want 1 button each Instances on TASKBAR. Answer: You need to add "EXIT" in your WWiV batch files. EXAMPLE: BBS1.BAT set WWIV_INSTANCE=1 E: cd\wwiv bbs -i1 /O EXIT In TOPAC07A.MOD. There are explaination to add "BBS /O" The "BBS /O" is when a users logoff your BBS. It will shut down your BBS. The "EXIT" is the command for Win95. Since WWIV is running in DOS mode so you need to "EXIT" to get out of DOS mode before a NEW button being made in your Win95 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ