# Makefile.in generated by automake 1.15 from Makefile.am. # Makefile. Generated from Makefile.in by configure.

# Copyright (C) 1994-2014 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE.

am__is_gnu_make = { \

if test -z '$(MAKELEVEL)'; then \
  false; \
elif test -n '$(MAKE_HOST)'; then \
  true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  true; \
else \
  false; \
fi; \

} am__make_running_with_option = \

case $${target_option-} in \
    ?) ;; \
     ) echo "am__make_running_with_option: internal error: invalid" \
            "target option '$${target_option-}' specified" >&2; \
       exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
  sane_makeflags=$$MFLAGS; \
else \
  case $$MAKEFLAGS in \
     \\[\ \   ]*) \
      bs=\\; \
      sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
        | sed "s/$$bs$$bs[$$bs $$bs   ]  /g"`;; \
  esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
  flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
  test $$skip_next = yes && { skip_next=no; continue; }; \
  case $$flg in \
     =*|--*) continue;; \
      -*I) strip_trailopt 'I'; skip_next=yes;; \
    -*I?*) strip_trailopt 'I';; \
      -*O) strip_trailopt 'O'; skip_next=yes;; \
    -*O?*) strip_trailopt 'O';; \
      -*l) strip_trailopt 'l'; skip_next=yes;; \
    -*l?*) strip_trailopt 'l';; \
    -[dEDm]) skip_next=yes;; \
    -[JT]) skip_next=yes;; \
  esac; \
  case $$flg in \
     $$target_option*) has_opt=yes; break;; \
  esac; \
done; \
test $$has_opt = yes

am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/msgpack pkgincludedir = $(includedir)/msgpack pkglibdir = $(libdir)/msgpack pkglibexecdir = $(libexecdir)/msgpack am__cd = CDPATH=“$${ZSH_VERSION+.}$(PATH_SEPARATOR)” && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-unknown-freebsd9.3 host_triplet = x86_64-unknown-freebsd9.3 subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

$(ACLOCAL_M4)

DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \

$(am__configure_deps) $(am__DIST_COMMON)

am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \

configure.lineno config.status.lineno

mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = msgpack.pc CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_$(V)) am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo “ GEN ” $@; am__v_GEN_1 = AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \

ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive

am__can_run_installinfo = \

case $$AM_UPDATE_INFO_DIR in \
  n|no|NO) false;; \
   ) (install-info --version) >/dev/null 2>&1;; \
esac

am__vpath_adj_setup = srcdirstrip=`echo “$(srcdir)” | sed 's|.|.|g'`; am__vpath_adj = case $$p in \

  $(srcdir)  ) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
   ) f=$$p;; \
esac;

am__strip_dir = f=`echo $$p | sed -e 's|^. ||'`; am__install_max = 40 am__nobase_strip_setup = \

srcdirstrip=%x`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`

am__nobase_strip = \

for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"

am__nobase_list = $(am__nobase_strip_setup); \

for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  if (++n[$$2] == $(am__install_max)) \
    { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  END { for (dir in files) print dir, files[dir] }'

am__base_list = \

sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'

am__uninstall_files_from_dir = { \

test -z "$$files" \
  || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
       $(am__cd) "$$dir" && rm -f $$files; }; \
}

am__installdirs = “$(DESTDIR)$(pkgconfigdir)” DATA = $(pkgconfig_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \

distclean-recursive maintainer-clean-recursive

am__recursive_targets = \

$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)

AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \

cscope distdir dist dist-all distcheck

am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \

$(LISP)config.h.in

# Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # not preserved. am__uniquify_input = $(AWK) '\

BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \

' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \

list='$(am__tagged_files)';  unique=%x`for i in $$list; do \
  if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`

ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \

$(srcdir)/msgpack.pc.in $(top_srcdir)/ac/compile \
$(top_srcdir)/ac/config.guess $(top_srcdir)/ac/config.sub \
$(top_srcdir)/ac/install-sh $(top_srcdir)/ac/ltmain.sh \
$(top_srcdir)/ac/missing AUTHORS COPYING ChangeLog INSTALL \
NEWS README ac/compile ac/config.guess ac/config.sub \
ac/install-sh ac/ltmain.sh ac/missing

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \

if test -d "$(distdir)"; then \
  find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
    && rm -rf "$(distdir)" \
    || { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi

am__post_remove_distdir = $(am__remove_distdir) am__relativize = \

dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*  ,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
  first=`echo "$$dir1" | sed -e "$$sed_first"`; \
  if test "$$first" != "."; then \
    if test "$$first" = ".."; then \
      dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
      dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
    else \
      first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
      if test "$$first2" = "$$first"; then \
        dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
      else \
        dir2="../$$dir2"; \
      fi; \
      dir0="$$dir0"/"$$first"; \
    fi; \
  fi; \
  dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"

DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = –best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \

| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'

distcleancheck_listfiles = find . -type f -print ACLOCAL = ${SHELL} /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/src/msgpack-1.1.0/ac/missing aclocal-1.15 AMTAR = $${TAR-tar} AM_DEFAULT_VERBOSITY = 1 AR = ar AUTOCONF = ${SHELL} /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/src/msgpack-1.1.0/ac/missing autoconf AUTOHEADER = ${SHELL} /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/src/msgpack-1.1.0/ac/missing autoheader AUTOMAKE = ${SHELL} /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/src/msgpack-1.1.0/ac/missing automake-1.15 AWK = nawk CC = gcc CCAS = gcc CCASDEPMODE = depmode=none CCASFLAGS = -O3 -Wall CCDEPMODE = depmode=none CFLAGS = -O3 -Wall -g CPP = gcc -E CPPFLAGS = CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=none CXXFLAGS = -O3 -Wall -g CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = false DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /usr/bin/grep -E EXEEXT = FGREP = /usr/bin/grep -F GREP = /usr/bin/grep INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LD = /usr/bin/ld LDFLAGS = LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = LN_S = ln -s LTLIBOBJS = LT_SYS_LIBRARY_PATH = MAKEINFO = ${SHELL} /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/src/msgpack-1.1.0/ac/missing makeinfo MANIFEST_TOOL = : MKDIR_P = ac/install-sh -c -d NM = /usr/bin/nm -B NMEDIT = OBJDUMP = objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = msgpack PACKAGE_BUGREPORT = PACKAGE_NAME = msgpack PACKAGE_STRING = msgpack 1.1.0 PACKAGE_TARNAME = msgpack PACKAGE_URL = PACKAGE_VERSION = 1.1.0 PATH_SEPARATOR = : RANLIB = ranlib SED = /usr/bin/sed SET_MAKE = SHELL = /bin/sh STRIP = strip VERSION = 1.1.0 VERSION_MAJOR = 1 VERSION_MINOR = 1 VERSION_REVISION = 0 abs_builddir = /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/src/msgpack-1.1.0 abs_srcdir = /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/src/msgpack-1.1.0 abs_top_builddir = /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/src/msgpack-1.1.0 abs_top_srcdir = /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/src/msgpack-1.1.0 ac_ct_AR = ar ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_DUMPBIN = am__include = include am__leading_dot = . am__quote = am__tar = $${TAR-tar} chof - “$$tardir” am__untar = $${TAR-tar} xf - bindir = ${exec_prefix}/bin build = x86_64-unknown-freebsd9.3 build_alias = build_cpu = x86_64 build_os = freebsd9.3 build_vendor = unknown builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = x86_64-unknown-freebsd9.3 host_alias = host_cpu = x86_64 host_os = freebsd9.3 host_vendor = unknown htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/src/msgpack-1.1.0/ac/install-sh libdir = /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/dst/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = $(MKDIR_P) oldincludedir = /usr/include pdfdir = ${docdir} prefix = /wrkdirs/usr/ports/devel/rubygem-rbtrace/work/stage/usr/local/lib/ruby/gems/2.2/gems/rbtrace-0.4.8/ext/dst program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${prefix}/etc target_alias = top_build_prefix = top_builddir = . top_srcdir = . SUBDIRS = src test DOC_FILES = \

README.md  LICENSE  NOTICE  msgpack_vc8.vcproj  msgpack_vc8.sln  msgpack_vc.postbuild.bat

EXTRA_DIST = \

$(DOC_FILES) CMakeLists.txt test/CMakeLists.txt

pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = msgpack.pc all: config.h

$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES: am–refresh: Makefile

@:

$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)

  @for dep in $?; do \
    case '$(am__configure_deps)' in \
$$dep*) \
        echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
        $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
          && exit 0; \
        exit 1;; \
    esac; \
  done; \
  echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
  $(am__cd) $(top_srcdir) && \
    $(AUTOMAKE) --gnu Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

    @case '$?' in \
config.status*) \
        echo ' $(SHELL) ./config.status'; \
        $(SHELL) ./config.status;; \
) \
        echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
        cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
    esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: $(am__configure_deps)

$(am__cd) $(srcdir) && $(AUTOCONF)

$(ACLOCAL_M4): $(am__aclocal_m4_deps)

$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

$(am__aclocal_m4_deps):

config.h: stamp-h1

@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status

@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h

$(srcdir)/config.h.in: $(am__configure_deps)

($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@

distclean-hdr:

-rm -f config.h stamp-h1

msgpack.pc: $(top_builddir)/config.status $(srcdir)/msgpack.pc.in

cd $(top_builddir) && $(SHELL) ./config.status $@

mostlyclean-libtool:

-rm -f *.lo

clean-libtool:

-rm -rf .libs _libs

distclean-libtool:

-rm -f libtool config.lt

install-pkgconfigDATA: $(pkgconfig_DATA)

@$(NORMAL_INSTALL)
@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
if test -n "$$list"; then \
  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
fi; \
for p in $$list; do \
  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
  echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
done

uninstall-pkgconfigDATA:

@$(NORMAL_UNINSTALL)
@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets):

    @fail=; \
    if $(am__make_keepgoing); then \
      failcom='fail=yes'; \
    else \
      failcom='exit 1'; \
    fi; \
    dot_seen=no; \
    target=`echo $@ | sed s/-recursive//`; \
    case "$@" in \
      distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
) list='$(SUBDIRS)' ;; \
    esac; \
    for subdir in $$list; do \
      echo "Making $$target in $$subdir"; \
      if test "$$subdir" = "."; then \
        dot_seen=yes; \
        local_target="$$target-am"; \
      else \
        local_target="$$target"; \
      fi; \
      ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
      || eval $$failcom; \
    done; \
    if test "$$dot_seen" = "no"; then \
      $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
    fi; test -z "$$fail"

ID: $(am__tagged_files)

$(am__define_uniq_tagged_files); mkid -fID $$unique

tags: tags-recursive TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
  include_option=--etags-include; \
  empty_fix=.; \
else \
  include_option=--include; \
  empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
  if test "$$subdir" = .; then :; else \
    test ! -f $$subdir/TAGS || \
      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
  fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
  test -n "$$unique" || unique=$$empty_fix; \
  if test $$# -gt 0; then \
    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
      "$$@" $$unique; \
  else \
    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
      $$unique; \
  fi; \
fi

ctags: ctags-recursive

CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
     $$unique

GTAGS:

here=`$(am__cd) $(top_builddir) && pwd` \
  && $(am__cd) $(top_srcdir) \
  && gtags -i $(GTAGS_ARGS) "$$here"

cscope: cscope.files

test ! -s cscope.files \
  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)

clean-cscope:

-rm -f cscope.files

cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)

    list='$(am__tagged_files)'; \
    case "$(srcdir)" in \
      [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
) sdir=$(subdir)/$(srcdir) ;; \
    esac; \
    for i in $$list; do \
      if test -f "$$i"; then \
        echo "$(subdir)/$$i"; \
      else \
        echo "$$sdir/$$i"; \
      fi; \
    done >> $(top_builddir)/cscope.files

distclean-tags:

-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(DISTFILES)

    $(am__remove_distdir)
    test -d "$(distdir)" || mkdir "$(distdir)"
    @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
    topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
    list='$(DISTFILES)'; \
      dist_files=`for file in $$list; do echo $$file; done | \
      sed -e "s|^$$srcdirstrip/||;t" \
          -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
    case $$dist_files in \
/*) $(MKDIR_P) `echo "$$dist_files" | \
                       sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
                       sort -u` ;; \
    esac; \
    for file in $$dist_files; do \
      if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
      if test -d $$d/$$file; then \
        dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
        if test -d "$(distdir)/$$file"; then \
          find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
        fi; \
        if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
          cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
          find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
        fi; \
        cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
      else \
        test -f "$(distdir)/$$file" \
        || cp -p $$d/$$file "$(distdir)/$$file" \
        || exit 1; \
      fi; \
    done
    @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
      if test "$$subdir" = .; then :; else \
        $(am__make_dryrun) \
          || test -d "$(distdir)/$$subdir" \
          || $(MKDIR_P) "$(distdir)/$$subdir" \
          || exit 1; \
        dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
        $(am__relativize); \
        new_distdir=$$reldir; \
        dir1=$$subdir; dir2="$(top_distdir)"; \
        $(am__relativize); \
        new_top_distdir=$$reldir; \
        echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
        echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
        ($(am__cd) $$subdir && \
          $(MAKE) $(AM_MAKEFLAGS) \
            top_distdir="$$new_top_distdir" \
            distdir="$$new_distdir" \
            am__remove_distdir=: \
            am__skip_length_check=: \
            am__skip_mode_fix=: \
            distdir) \
          || exit 1; \
      fi; \
    done
    -test -n "$(am__skip_mode_fix)" \
    || find "$(distdir)" -type d ! -perm -755 \
            -exec chmod u+rwx,go+rx {} \; -o \
      ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
      ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
      ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
    || chmod -R a+r "$(distdir)"

dist-gzip: distdir

tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__post_remove_distdir)

dist-bzip2: distdir

tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)

dist-lzip: distdir

tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)

dist-xz: distdir

tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)

dist-tarZ: distdir

@echo WARNING: "Support for distribution archives compressed with" \
               "legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)

dist-shar: distdir

@echo WARNING: "Support for shar distribution archives is" \
               "deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)

dist-zip: distdir

-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)

dist dist-all:

$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist

      case '$(DIST_ARCHIVES)' in \
.tar.gz*) \
        GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
.tar.bz2*) \
        bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
.tar.lz*) \
        lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
.tar.xz*) \
        xz -dc $(distdir).tar.xz | $(am__untar) ;;\
.tar.Z*) \
        uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
.shar.gz*) \
        GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
.zip*) \
        unzip $(distdir).zip ;;\
      esac
      chmod -R a-w $(distdir)
      chmod u+w $(distdir)
      mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
      chmod a-w $(distdir)
      test -d $(distdir)/_build || exit 0; \
      dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
        && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
        && am__cwd=`pwd` \
        && $(am__cd) $(distdir)/_build/sub \
        && ../../configure \
          $(AM_DISTCHECK_CONFIGURE_FLAGS) \
          $(DISTCHECK_CONFIGURE_FLAGS) \
          --srcdir=../.. --prefix="$$dc_install_base" \
        && $(MAKE) $(AM_MAKEFLAGS) \
        && $(MAKE) $(AM_MAKEFLAGS) dvi \
        && $(MAKE) $(AM_MAKEFLAGS) check \
        && $(MAKE) $(AM_MAKEFLAGS) install \
        && $(MAKE) $(AM_MAKEFLAGS) installcheck \
        && $(MAKE) $(AM_MAKEFLAGS) uninstall \
        && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
              distuninstallcheck \
        && chmod -R a-w "$$dc_install_base" \
        && ({ \
             (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
             && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
             && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
             && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
                  distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
            } || { rm -rf "$$dc_destdir"; exit 1; }) \
        && rm -rf "$$dc_destdir" \
        && $(MAKE) $(AM_MAKEFLAGS) dist \
        && rm -rf $(DIST_ARCHIVES) \
        && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
        && cd "$$am__cwd" \
        || exit 1
      $(am__post_remove_distdir)
      @(echo "$(distdir) archives ready for distribution: "; \
        list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
        sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'

distuninstallcheck:

@test -n '$(distuninstallcheck_dir)' || { \
  echo 'ERROR: trying to run $@ with an empty' \
       '$$(distuninstallcheck_dir)' >&2; \
  exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
  exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
   || { echo "ERROR: files left after uninstall:" ; \
        if test -n "$(DESTDIR)"; then \
          echo "  (check DESTDIR support)"; \
        fi ; \
        $(distuninstallcheck_listfiles) ; \
        exit 1; } >&2

distcleancheck: distclean

@if test '$(srcdir)' = . ; then \
  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
  exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
  || { echo "ERROR: files left in build directory after distclean:" ; \
       $(distcleancheck_listfiles) ; \
       exit 1; } >&2

check-am: all-am check: check-recursive all-am: Makefile $(DATA) config.h installdirs: installdirs-recursive installdirs-am:

for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done

install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive

install-am: all-am

@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive install-strip:

if test -z '$(STRIP)'; then \
  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
      install; \
else \
  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi

mostlyclean-generic:

clean-generic:

distclean-generic:

-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:

@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."

clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive

-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile

distclean-am: clean-am distclean-generic distclean-hdr \

distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-pkgconfigDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-pkgconfigDATA

.MAKE: $(am__recursive_targets) all install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \

am--refresh check check-am clean clean-cscope clean-generic \
clean-libtool cscope cscopelist-am ctags ctags-am dist \
dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
dist-xz dist-zip distcheck distclean distclean-generic \
distclean-hdr distclean-libtool distclean-tags distcleancheck \
distdir distuninstallcheck dvi dvi-am html html-am info \
info-am install install-am install-data install-data-am \
install-dvi install-dvi-am install-exec install-exec-am \
install-html install-html-am install-info install-info-am \
install-man install-pdf install-pdf-am install-pkgconfigDATA \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-pkgconfigDATA

.PRECIOUS: Makefile

doxygen:

./preprocess clean
cd src && $(MAKE) doxygen
./preprocess

# Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: