## B.14 Pictures and Colours

- The picture environment and the graphics Package
- The color Package

### B.14.1 The picture environment and the graphics Package

It is possible to have pictures and graphics processed by imagen (see section 6.1). In the case of the picture environment it remains users responsibility to explicitly choose source chunks that will get rendered as images. In the case of the commands from the graphics package, this choice is made by HEVEA.

For instance consider the following picture:

    \newcounter{cms}
    \setlength{\unitlength}{1mm}
    \begin{picture}(50,10)
    \put(0,7){\makebox(0,0)[b]{cm}}
    \multiput(10,7)(10,0){5}{\addtocounter{cms}{1}\makebox(0,0)[b]{\arabic{cms}}}
    \multiput(1,0)(1,0){49}{\line(0,1){2.5}}
    \multiput(5,0)(10,0){5}{\line(0,1){5}}
    \thicklines
    \put(0,0){\line(1,0){50}}
    \multiput(0,0)(10,0){6}{\line(0,1){5}}
    \end{picture}

Users should enclose all picture elements in a `toimage` environment (or inside `%BEGIN IMAGE`… `%END IMAGE` comments) and insert an `\imageflush` command, where they want the image to appear in html output:

    %BEGIN IMAGE
    \newcounter{cms}
    \setlength{\unitlength}{1mm}
    \begin{picture}(50,10)
      ...
    \end{picture}
    %END IMAGE
    %HEVEA\imageflush

This will result in normal processing by LATEX and image inclusion by HEVEA:

All commands from the graphics package are implemented using the automatic image inclusion feature. More precisely, the outermost invocations of the `\includegraphics`, `\scalebox`, etc. commands are sent to the image image file and there will be one image per outermost invocation of these commands.

For instance, consider a document doc.tex that loads the graphics package and that includes some (scaled) images by:

    \begin{center}
    \scalebox{.5}{\includegraphics{round.ps}}
    \scalebox{.75}{\includegraphics{round.ps}}
    \includegraphics{round.ps}
    \end{center}

Then, issuing the following two commands:

    # hevea doc.tex
    # imagen doc

yields html that basically consists in three image links, the images being generated by imagen.

Since the advent of pdflatex, using `\includegraphics` to insert bitmap images (e.g. .gif or .jpg) became frequent. In that case, users are advised not to use HEVEA default implementation of the graphics package. Instead, they may use a simple variation of the technique described in Section 8.2.

### B.14.2 The color Package

HEVEA partly implements the color package. Implemented commands are `\definecolor`, `\color`, `\colorbox` and `\textcolor`. Other commands from the color package do not exist. At startup, colours black, white, red, green, blue, cyan, yellow and magenta are pre-defined.

Colours are defined by `\definecolor{`name`}{`model`}{`spec`}`, where name is the color name, model is the color model used, and spec is the color specification according to the given model. Defined colours are used by the declaration `\color{`name`}` and by the command `\textcolor{`name`}{`text`}`, which change text color. Please note that, the `\color` declaration accepts color specifications directly when invoked as `\color[`model`]{`spec`}`. The `\textcolor` command has a similar feature.

As regards color models, HEVEA implements the rgb, cmyk, hsv and hls color models. In those models, color specifications are floating point numbers less than one. For instance, here is the definition for the red color:

    \definecolor{red}{rgb}{1, 0, 0}

The named color model is also supported, in this model color specification are just names… Named colours are the ones of dvips.

GreenYellow, Yellow, Goldenrod, Dandelion, Apricot, Peach, Melon, YellowOrange, Orange, BurntOrange, Bittersweet, RedOrange, Mahogany, Maroon, BrickRed, Red, OrangeRed, RubineRed, WildStrawberry, Salmon, CarnationPink, Magenta, VioletRed, Rhodamine, Mulberry, RedViolet, Fuchsia, Lavender, Thistle, Orchid, DarkOrchid, Purple, Plum, Violet, RoyalPurple, BlueViolet, Periwinkle, CadetBlue, CornflowerBlue, MidnightBlue, NavyBlue, RoyalBlue, Blue, Cerulean, Cyan, ProcessBlue, SkyBlue, Turquoise, TealBlue, Aquamarine, BlueGreen, Emerald, JungleGreen, SeaGreen, Green, ForestGreen, PineGreen, LimeGreen, YellowGreen, SpringGreen, OliveGreen, RawSienna, Sepia, Brown, Tan, Gray, Black, White.

There are at least three ways to use colours from the named model.

1. Define a color name for them.
2. Specify the named color model as an optional argument to `\color` and `\textcolor`.
3. Use the names directly (HEVEA implements the color package with the usenames option given).

That is:

1. `\definecolor{rouge-brique}{named}{BrickRed}\textcolor{rouge-brique}{Text as a brick}`.
2. `\textcolor[named]{BrickRed}{Text as another brick}`.
3. `\textcolor{BrickRed}{Text as another brick}`.

Which yields:

1. Text as a brick.
2. Text as another brick.
3. Text as another brick.

Colours should be used carefully. Too many colours hinders clarity and some of the colours may not be readable on the document background color.

#### B.14.2.1 The bgcolor environment

With respect to the LATEX color package, HEVEA features an additional bgcolor environment, for changing the background color of some subparts of the document. The bgcolor environment is a displayed environment and it normally starts a new line. Simple usage is `\begin{bgcolor}{`color`}`… `\end{bgcolor}`, where color is a color defined with `\definecolor`. Hence the following source yield a paragraph with a red background:

    \begin{bgcolor}{red}
    \color{yellow}Yellow letters on a red backgroud
    \end{bgcolor}

Yellow letters on a red background

The bgcolor environment is implemented by one-cell `table` element, it takes an optional argument that is used as an attribute for the inner `td` element (default value is `style="padding:1em"`). Advanced users may change the default, for instance as:

    \begin{bgcolor}[style="padding:0"]{yellow}
    \color{red}Red letters on a yellow backgroud
    \end{bgcolor}

The resulting output will be red letters on a yellow background and no padding:

Red letters on a yellow background, no padding

#### B.14.2.2 From High-Level Colours to Low-Level Colours

High-level colours are color names defined with `\definecolor`. Low-level colours are html-style colours. That is, they are either one of the sixteen conventional colours black, silver etc., or a RGB hexadecimal color specification of the form `"#XXXXXX"`.

One changes the high-level high-color into a low-level color by `\@getcolor{`high-color`}`. Low-level colours are appropriate inside html attributes and as arguments to the `\@fontcolor` internal macro. An example of `\@getcolor` usage can be found at the end of section 8.5.

There is also `\@getstylecolor` command that acts like`\@getcolor`, except that it does not output the double quotes around RGB hexadecimal color specifications. Such low-level colours are appropriate for style definitions in cascading style sheets [CSS-2]. See Section 9.3 for an example.