Netdisco - MIB Repository
Max Baker
---------------------------------------------------------------------------
Version 1.2
---------------------------------------------------------------------------
    I maintain a workable set of MIBS to use with Netdisco 
    and other network managment tools. 

    I would like to be able to do snmpwalks without having everything blow up.

    These mibs should cover all the devices listed in 
        http://snmp-info.sourceforge.net/DeviceMatrix.html

    All these have been painstakingly fixed up to
    parse correctly under net-snmp 5.4.  All duplicates have been
    removed favoring always the newest version.  Typos and logical
    errors in the MIBs are fixed.

---------------------------------------------------------------------------
MIB Versions
---------------------------------------------------------------------------
    3Com:      MIBs for HP, H3C and 3Com products v4.0
    APC:       4.0.5
    Cisco:     07/04/2012 (last v2.tar.gz is dated 08/2008)
    Enterasys: 08/2011
    Extreme:   v762b3 01/09/06
    Foundry:   FGL04000 11/07
    HP:        May 2012 update
    Juniper:   11.4R3.7
    Net-SNMP:  5.7.1
    Nortel:    Various - Last update 07/2012
    RFC:       ianalist updated 2010-04-21 and rfclist updated 2011-03-14
    Ruckus:    9.4
    Trapeze:   8.0
    Xirrus:    6.1.2

---------------------------------------------------------------------------

USAGE OUTSIDE OF NETDISCO
---------------------------------------------------------------------------
    Copy the supplied snmp.conf to either
        /usr/local/share/snmp/snmp.conf
    OR
        ~/.snmp/snmp.conf

    Be sure to look in the file and change things to match your enviornment.

---------------------------------------------------------------------------
ADDING DEVICE SUPPORT
---------------------------------------------------------------------------
Mib setup:
1. Add all the mibs given by your vendor in a new directory
2. run mkindex
3. run chk_dups and then remove the dups in your new dir
4. add new directory to snmp.conf and netdisco.conf

SNMP::Info setup:
1. run walk_all on the device save the output to a text file.
   This will query the device for every mib on the system, to see what 
   data is available with the MIBs available.
2. check to see what data is missing in netdisco for your device after
   running a discover on it
3. create a new subclass of L2 or L3 for your device family
4. use the text file from step 1 to find missing info
5. add data and mib dependencies to new subclass
6. ask on mailing list for help

Send all changes back to mailing list so that everyone else can enjoy
the fruits of your labor and improve upon them.
