From nobody@FreeBSD.org Wed Jan 27 16:45:19 2010 Return-Path: Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6DBEB1065676 for ; Wed, 27 Jan 2010 16:45:19 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from www.freebsd.org (www.freebsd.org [IPv6:2001:4f8:fff6::21]) by mx1.freebsd.org (Postfix) with ESMTP id 5B01A8FC1E for ; Wed, 27 Jan 2010 16:45:19 +0000 (UTC) Received: from www.freebsd.org (localhost [127.0.0.1]) by www.freebsd.org (8.14.3/8.14.3) with ESMTP id o0RGjIAw070262 for ; Wed, 27 Jan 2010 16:45:18 GMT (envelope-from nobody@www.freebsd.org) Received: (from nobody@localhost) by www.freebsd.org (8.14.3/8.14.3/Submit) id o0RGjIeF070261; Wed, 27 Jan 2010 16:45:18 GMT (envelope-from nobody) Message-Id: <201001271645.o0RGjIeF070261@www.freebsd.org> Date: Wed, 27 Jan 2010 16:45:18 GMT From: Alexey To: freebsd-gnats-submit@FreeBSD.org Subject: copying process stops at some time (10 - 50 seconds) from usb disk only nForce motherboards in 8.0-RELEASE/STABLE X-Send-Pr-Version: www-3.1 X-GNATS-Notify: >Number: 143294 >Category: usb >Synopsis: [usb8] copying process stops at some time (10 - 50 seconds) from usb disk only nForce motherboards in 8.0-RELEASE/STABLE >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-usb >State: feedback >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Jan 27 16:50:01 UTC 2010 >Closed-Date: >Last-Modified: Tue Feb 9 04:10:01 UTC 2010 >Originator: Alexey >Release: FreeBSD 8.0-STABLE-201001 >Organization: Atlantis Network >Environment: FreeBSD ALEXF.WORKGROUP 8.0-STABLE-201001 FreeBSD 8.0-STABLE-201001 #0: Sat Jan 16 11:44:32 YEKT 2010 >Description: This bug is the place to be to motherboard nForce chipset. Copying process from usb stick or usb hdd stops at some time (10 - 50 seconds). dmesg: Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE-201001 #0: Sat Jan 16 11:44:32 YEKT 2010 root@:/usr/src/sys/i386/compile/ALEX_USB i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc148a000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc148a174. Preloaded elf module "/boot/modules/nvidia.ko" at 0xc148a220. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2104406119 Hz CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2104.41-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1 Features=0x178bfbff Features2=0x2001 AMD Features=0xea500800 AMD Features2=0x11f Data TLB: 32 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001826000 - 0x000000007da9ffff, 2082971648 bytes (508538 pages) avail memory = 2081628160 (1985 MB) Table 'FACP' at 0x7fef9d80 Table 'HPET' at 0x7fef9f80 Table 'MCFG' at 0x7fefa000 Table 'APIC' at 0x7fef9ec0 APIC: Found table at 0x7fef9ec0 MP Configuration Table version 1.4 found at 0xc00f1400 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00fb7d0 bios32: Entry = 0xf2030 (c00f2030) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x2060 pnpbios: Found PnP BIOS data at 0xc00fc330 pnpbios: Entry = f0000:c360 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf75e0 00024 (v2 Nvidia) ACPI: XSDT 0x7fef3100 00044 (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: FACP 0x7fef9d80 000F4 (v3 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: DSDT 0x7fef3280 06AC0 (v1 NVIDIA ASUSACPI 00001000 MSFT 03000000) ACPI: FACS 0x7fef0000 00040 ACPI: HPET 0x7fef9f80 00038 (v1 Nvidia ASUSACPI 42302E31 AWRD 00000098) ACPI: MCFG 0x7fefa000 0003C (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: APIC 0x7fef9ec0 0007C (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level MADT: Interrupt override: source 14, irq 14 MADT: Interrupt override: source 15, irq 15 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device io: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 npx0: INT 16 interface acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 pcibios: BIOS version 3.00 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SMCA -> bus 0 dev 10 func 1 acpi0: Power Button (fixed) acpi0: wakeup code va 0xc58bc000 pa 0x1000 AcpiOsDerivePciId: \\_SB_.PCI0.IGPU.GPUR -> bus 0 dev 5 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.VT86.PIO1 -> bus 0 dev 10 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.VT86.PIRQ -> bus 0 dev 10 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fdf0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 9 10 11 14 15 Validation 0 5 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 14 15 Validation 0 11 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 14 15 Validation 0 11 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 5 7 9 10 11 14 15 Validation 0 10 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 9 10 11 14 15 Validation 0 5 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link19: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 9 10 11 14 15 Validation 0 5 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link20: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link21: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 17 Validation 0 255 N 0 17 After Disable 0 255 N 0 17 pci_link22: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 18 Validation 0 255 N 0 18 After Disable 0 255 N 0 18 pci_link23: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 19 Validation 0 255 N 0 19 After Disable 0 255 N 0 19 pci_link24: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link25: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link26: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link27: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link28: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link29: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link30: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link31: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link32: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link33: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link34: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link35: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link36: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link37: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link38: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link39: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link40: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 acpi_hpet0: iomem 0xfefff000-0xfefff3ff on acpi0 acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x10de, dev=0x02f0, revid=0xa2 domain=0, bus=0, slot=0, func=0 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fa, revid=0xa2 domain=0, bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fe, revid=0xa2 domain=0, bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02f8, revid=0xa2 domain=0, bus=0, slot=0, func=3 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02f9, revid=0xa2 domain=0, bus=0, slot=0, func=4 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02ff, revid=0xa2 domain=0, bus=0, slot=0, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x027f, revid=0xa2 domain=0, bus=0, slot=0, func=6 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0102, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x027e, revid=0xa2 domain=0, bus=0, slot=0, func=7 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fb, revid=0xa1 domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0270, revid=0xa2 domain=0, bus=0, slot=9, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0260, revid=0xa3 domain=0, bus=0, slot=10, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0264, revid=0xa3 domain=0, bus=0, slot=10, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x4c00, size 6, enabled map[24]: type I/O Port, range 32, base 0x4c40, size 6, enabled found-> vendor=0x10de, dev=0x0272, revid=0xa3 domain=0, bus=0, slot=10, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x026d, revid=0xa3 domain=0, bus=0, slot=11, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02f000, size 12, enabled unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02f000 ohci early: SMM active, request owner change found-> vendor=0x10de, dev=0x026e, revid=0xa3 domain=0, bus=0, slot=11, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02e000, size 8, enabled unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02e000 found-> vendor=0x10de, dev=0x0265, revid=0xa1 domain=0, bus=0, slot=13, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xf400, size 4, enabled found-> vendor=0x10de, dev=0x0266, revid=0xa1 domain=0, bus=0, slot=14, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9f0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbf0, size 2, enabled map[18]: type I/O Port, range 32, base 0x970, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb70, size 2, enabled map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled map[24]: type Memory, range 32, base 0xfe02d000, size 12, enabled pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.APSI:0) pci_link39: Picked IRQ 20 with weight 0 pcib0: slot 14 INTA routed to irq 20 via \\_SB_.PCI0.APSI found-> vendor=0x10de, dev=0x0267, revid=0xa1 domain=0, bus=0, slot=15, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9e0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbe0, size 2, enabled map[18]: type I/O Port, range 32, base 0x960, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb60, size 2, enabled map[20]: type I/O Port, range 32, base 0xcc00, size 4, enabled map[24]: type Memory, range 32, base 0xfe02c000, size 12, enabled pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.APSJ:0) pci_link40: Picked IRQ 21 with weight 0 pcib0: slot 15 INTA routed to irq 21 via \\_SB_.PCI0.APSJ found-> vendor=0x10de, dev=0x026f, revid=0xa2 domain=0, bus=0, slot=16, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns) found-> vendor=0x10de, dev=0x026c, revid=0xa2 domain=0, bus=0, slot=16, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks map[10]: type Memory, range 32, base 0xfe024000, size 14, enabled pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.AAZA:0) pci_link33: Picked IRQ 22 with weight 0 pcib0: slot 16 INTB routed to irq 22 via \\_SB_.PCI0.AAZA found-> vendor=0x10de, dev=0x0269, revid=0xa3 domain=0, bus=0, slot=20, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled map[14]: type I/O Port, range 32, base 0xc800, size 3, enabled pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.APCH:0) pci_link30: Picked IRQ 23 with weight 0 pcib0: slot 20 INTA routed to irq 23 via \\_SB_.PCI0.APCH found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 0.3 (no driver attached) pci0: at device 0.4 (no driver attached) pci0: at device 0.5 (no driver attached) pci0: at device 0.6 (no driver attached) pci0: at device 0.7 (no driver attached) pcib1: at device 4.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xa000-0xafff pcib1: memory decode 0xfa000000-0xfcffffff pcib1: prefetched decode 0xd0000000-0xdfffffff pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.XVRA - AE_NOT_FOUND pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0392, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled pcib1: requested memory range 0xfa000000-0xfaffffff: good map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[1c]: type Memory, range 64, base 0xfb000000, size 24, enabled pcib1: requested memory range 0xfb000000-0xfbffffff: good map[24]: type I/O Port, range 32, base 0xac00, size 7, enabled pcib1: requested I/O range 0xac00-0xac7f: in range pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.APC5:0) pci_link24: Picked IRQ 16 with weight 0 pcib0: slot 4 INTA routed to irq 16 via \\_SB_.PCI0.APC5 pcib1: slot 0 INTA is routed to irq 16 vgapci0: port 0xac00-0xac7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 16 at device 0.0 on pci1 nvidia0: on vgapci0 vgapci0: child nvidia0 requested pci_enable_busmaster vgapci0: child nvidia0 requested pci_enable_io vgapci0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xfa000000 vgapci0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xd0000000 vgapci0: Reserved 0x1000000 bytes for rid 0x1c type 3 at 0xfb000000 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] pci0: at device 9.0 (no driver attached) isab0: at device 10.0 on pci0 isa0: on isab0 pci0: at device 10.1 (no driver attached) pci0: at device 10.2 (no driver attached) ohci0: mem 0xfe02f000-0xfe02ffff at device 11.0 on pci0 pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.APCF:0) pci_link28: Picked IRQ 20 with weight 1 pcib0: slot 11 INTA routed to irq 20 via \\_SB_.PCI0.APCF ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: on ohci0 ehci0: mem 0xfe02e000-0xfe02e0ff at device 11.1 on pci0 pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.APCL:0) pci_link36: Picked IRQ 21 with weight 1 pcib0: slot 11 INTB routed to irq 21 via \\_SB_.PCI0.APCL ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: on ehci0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf400 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 52 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=7f ostat1=50 ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=ff stat1=00 devices=0x20000 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 53 ata1: [MPSAFE] ata1: [ITHREAD] atapci1: port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 20 at device 14.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02d000 ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0 ata2: SATA connect time=0ms status=00000123 ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70 ata3: SATA connect time=0ms status=00000123 ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: [MPSAFE] ata3: [ITHREAD] atapci2: port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 21 at device 15.0 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc00 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02c000 ata4: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0 ata4: SATA connect timeout status=00000000 ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60 ata5: SATA connect timeout status=00000000 ata5: [MPSAFE] ata5: [ITHREAD] pcib2: at device 16.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xb000-0xbfff pcib2: memory decode 0xfde00000-0xfdefffff pcib2: prefetched decode 0xfdd00000-0xfddfffff pcib2: Subtractively decoded bridge. pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x10ec, dev=0x8139, revid=0x10 domain=0, bus=2, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xbc00, size 8, enabled pcib2: requested I/O range 0xbc00-0xbcff: in range map[14]: type Memory, range 32, base 0xfdeff000, size 8, enabled pcib2: requested memory range 0xfdeff000-0xfdeff0ff: good pcib2: matched entry for 2.9.INTA (src \\_SB_.PCI0.APC2:0) pci_link21: Picked IRQ 17 with weight 0 pcib2: slot 9 INTA routed to irq 17 via \\_SB_.PCI0.APC2 rl0: port 0xbc00-0xbcff mem 0xfdeff000-0xfdeff0ff irq 17 at device 9.0 on pci2 rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xbc00 miibus0: on rl0 rlphy0: PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:c0:df:13:4a:77 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 54 rl0: [MPSAFE] rl0: [ITHREAD] pci0: at device 16.1 (no driver attached) nfe0: port 0xc800-0xc807 mem 0xfe02b000-0xfe02bfff irq 23 at device 20.0 on pci0 nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 miibus1: on nfe0 e1000phy0: PHY 1 on miibus1 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: bpf attached nfe0: Ethernet address: 00:1a:92:7c:06:8d ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55 nfe0: [MPSAFE] nfe0: [FILTER] acpi_tz0: on acpi0 atrtc0: port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 56 uart0: [FILTER] uart0: fast interrupt uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 57 uart1: [FILTER] uart1: fast interrupt ppc0: using extended I/O port range ppc0: SPP EPP ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 58 ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached plip0: [MPSAFE] plip0: [ITHREAD] lpt0: on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: on ppbus0 psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 60 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 cpu0: on acpi0 cpu0: switching to generic Cx mode powernow0: on cpu0 powernow0: STATUS: 0x310a120c0a0d020d powernow0: STATUS: maxfid: 0x0d powernow0: STATUS: maxvid: 0x0a device_attach: powernow0 attach returned 6 cpu1: on acpi0 powernow1: on cpu1 powernow1: STATUS: 0x310a120c0a0d020d powernow1: STATUS: maxfid: 0x0d powernow1: STATUS: maxvid: 0x0a device_attach: powernow1 attach returned 6 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it uart: uart1 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 133529 -> 100000 procfs registered lapic: Divisor 2, Frequency 100209823 hz Timecounter "TSC" frequency 2104406119 Hz quality -100 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00000001 ata0: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting UDMA100 ad0: 114473MB at ata0-master UDMA100 ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ad0: nVidia check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1: Identifying devices: 00020000 ata1: New devices: 00020000 ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire acd0: setting UDMA66 acd0: DVDR drive at ata1 as slave acd0: read 6890KB/s (6890KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA66 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2: Identifying devices: 00000001 ata2: New devices: 00000001 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: setting UDMA100 ad4: 76319MB at ata2-master UDMA100 SATA 3Gb/s ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: nVidia check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00000001 ata3: New devices: 00000001 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: setting UDMA100 ad6: 715404MB at ata3-master UDMA100 SATA 3Gb/s ad6: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue ad6: nVidia check1 failed ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000000 ata5: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48 ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 1 vector 49 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 50 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 51 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 52 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 53 GEOM: new disk ad4 GEOM: new disk ad6 uhub0: 8 ports with 8 removable, self powered uhub1: 8 ports with 8 removable, self powered ugen1.2: at usbus1 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 GEOM: new disk da0 pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0 pass0: Fixed Direct Access SCSI-4 device pass0: Serial Number 2GEWDLZ4 pass0: 40.000MB/s transfers da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Fixed Direct Access SCSI-4 device da0: Serial Number 2GEWDLZ4 da0: 40.000MB/s transfers da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C) Trying to mount root from ufs:/dev/da0s1a ct_to_ts([2010-01-27 20:41:07]) = 1264624867.000000000 start_init: trying /sbin/init linprocfs registered splash: image decoder found: daemon_saver rl0: link state changed to UP ugen1.3: at usbus1 umass1: on usbus1 umass1: SCSI over Bulk-Only; quirks = 0x0100 umass1:1:1:-1: Attached to scbus1 (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI Status: Check Condition (probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (probe0:umass-sim1:1:0:0): Not ready to ready change, medium may have changed (probe0:umass-sim1:1:0:0): (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (probe0:umass-sim1:1:0:0): Not ready to ready change, medium may have changed Retrying Command (per Sense Data) (probe0:umass-sim1:1:0:0): Retrying Command GEOM: new disk da1 pass1 at umass-sim1 bus 1 scbus1 target 0 lun 0 pass1: Removable Direct Access SCSI-2 device pass1: Serial Number 00000000 pass1: 40.000MB/s transfers da1 at umass-sim1 bus 1 scbus1 target 0 lun 0 da1: Removable Direct Access SCSI-2 device da1: Serial Number 00000000 da1: 40.000MB/s transfers da1: 1960MB (4014080 512 byte sectors: 255H 63S/T 249C) (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Retrying Command (da1:umass-sim1:1:0:0): Request completed with CAM_REQ_CMP_ERR (da1:umass-sim1:1:0:0): Retrying Command (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Retrying Command pciconf -lv none0@pci0:0:0:0: class=0x050000 card=0x81c01043 chip=0x02f010de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'C51 Host Bridge' class = memory subclass = RAM none1@pci0:0:0:1: class=0x050000 card=0x81c01043 chip=0x02fa10de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'C51 Memory Controller 0' class = memory subclass = RAM none2@pci0:0:0:2: class=0x050000 card=0x81c01043 chip=0x02fe10de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'C51 Memory Controller 1' class = memory subclass = RAM none3@pci0:0:0:3: class=0x050000 card=0x81c01043 chip=0x02f810de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'C51 Memory Controller 5' class = memory subclass = RAM none4@pci0:0:0:4: class=0x050000 card=0x81c01043 chip=0x02f910de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'C51 Memory Controller 4' class = memory subclass = RAM none5@pci0:0:0:5: class=0x050000 card=0x81c01043 chip=0x02ff10de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'C51 Host Bridge' class = memory subclass = RAM none6@pci0:0:0:6: class=0x050000 card=0x81c01043 chip=0x027f10de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'C51 Memory Controller 3' class = memory subclass = RAM none7@pci0:0:0:7: class=0x050000 card=0x81c01043 chip=0x027e10de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'C51 Memory Controller 2' class = memory subclass = RAM pcib1@pci0:0:4:0: class=0x060400 card=0x000010de chip=0x02fb10de rev=0xa1 hdr=0x01 vendor = 'Nvidia Corp' device = 'C51 PCIe Bridge' class = bridge subclass = PCI-PCI none8@pci0:0:9:0: class=0x050000 card=0x81c01043 chip=0x027010de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'MCP51 Host Bridge' class = memory subclass = RAM isab0@pci0:0:10:0: class=0x060100 card=0x81c01043 chip=0x026010de rev=0xa3 hdr=0x00 vendor = 'Nvidia Corp' device = 'MCP51 LPC Bridge' class = bridge subclass = PCI-ISA none9@pci0:0:10:1: class=0x0c0500 card=0x81c01043 chip=0x026410de rev=0xa3 hdr=0x00 vendor = 'Nvidia Corp' device = 'NVIDIA nForce PCI System Management (NVIDIA SMB Bus Controller)' class = serial bus subclass = SMBus none10@pci0:0:10:2: class=0x050000 card=0x81c01043 chip=0x027210de rev=0xa3 hdr=0x00 vendor = 'Nvidia Corp' device = 'MCP51 Memory Controller 0' class = memory subclass = RAM ohci0@pci0:0:11:0: class=0x0c0310 card=0x81c01043 chip=0x026d10de rev=0xa3 hdr=0x00 vendor = 'Nvidia Corp' device = 'MCP51 USB Controller' class = serial bus subclass = USB ehci0@pci0:0:11:1: class=0x0c0320 card=0x81c01043 chip=0x026e10de rev=0xa3 hdr=0x00 vendor = 'Nvidia Corp' device = 'MCP51 USB Controller' class = serial bus subclass = USB atapci0@pci0:0:13:0: class=0x01018a card=0x81c01043 chip=0x026510de rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' device = 'MCP51 Parallel ATA Controller' class = mass storage subclass = ATA atapci1@pci0:0:14:0: class=0x010185 card=0x81c01043 chip=0x026610de rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' device = 'NVIDIA nForce 430/410 Serial ATA Controller (MCP51S)' class = mass storage subclass = ATA atapci2@pci0:0:15:0: class=0x010185 card=0x81c01043 chip=0x026710de rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' device = 'NVIDIA nForce 430/410 Serial ATA Controller (MCP51S)' class = mass storage subclass = ATA pcib2@pci0:0:16:0: class=0x060401 card=0x00000000 chip=0x026f10de rev=0xa2 hdr=0x01 vendor = 'Nvidia Corp' device = 'MCP51 PCI Bridge' class = bridge subclass = PCI-PCI none11@pci0:0:16:1: class=0x040300 card=0x81cb1043 chip=0x026c10de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'MCP51 High Definition Audio' class = multimedia subclass = HDA nfe0@pci0:0:20:0: class=0x068000 card=0x816a1043 chip=0x026910de rev=0xa3 hdr=0x00 vendor = 'Nvidia Corp' device = 'MCP51 Ethernet Controller (2A34103C)' class = bridge hostb0@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport Technology Configuration' class = bridge subclass = HOST-PCI hostb1@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon64/Opteron/Sempron (K8 Family) Address Map' class = bridge subclass = HOST-PCI hostb2@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon64/Opteron/Sempron (K8 Family) DRAM Controller' class = bridge subclass = HOST-PCI hostb3@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous Control' class = bridge subclass = HOST-PCI vgapci0@pci0:1:0:0: class=0x030000 card=0x341a1458 chip=0x039210de rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' device = 'NVIDIA GeForce 7600 GS (NVIDIA GeForce 7600 GS)' class = display subclass = VGA rl0@pci0:2:9:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'Realtek RTL8139 Family PCI Fast Ethernet NIC (RTL-8139/8139C/8139C)' class = network subclass = ethernet >How-To-Repeat: Install FreeBSD 8.0-RELEASE or 8.0-STABLE-201001 to motherboard nForce chipset. Let GA-M56S-S3 or or any nForce430,560,630... Install mc. Mount usb stick and copy group files about 600Mb. Copying process but freeze. >Fix: Problem fix: turn off usb 2.0 in BIOS or hw.usb.ehci.no_hs=1. USB1.0 work slow, problem not found. :( FreeBSD 7.2 worked normal, not problem. >Release-Note: >Audit-Trail: From: Hans Petter Selasky To: freebsd-usb@freebsd.org Cc: Alexey , freebsd-gnats-submit@freebsd.org Subject: Re: usb/143294: copying process stops at some time (10 - 50 seconds) from usb disk only nForce motherboards in 8.0-RELEASE/STABLE Date: Wed, 27 Jan 2010 18:27:16 +0100 On Wednesday 27 January 2010 17:45:18 Alexey wrote: > >Number: 143294 > >Category: usb > >Synopsis: copying process stops at some time (10 - 50 seconds) from > > usb disk only nForce motherboards in 8.0-RELEASE/STABLE Confidential: > > no > >Severity: serious > >Priority: medium > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Wed Jan 27 16:50:01 UTC 2010 > >Closed-Date: > >Last-Modified: > >Originator: Alexey > >Release: FreeBSD 8.0-STABLE-201001 > >Organization: > > Atlantis Network > > >Environment: > > FreeBSD ALEXF.WORKGROUP 8.0-STABLE-201001 FreeBSD 8.0-STABLE-201001 #0: Sat > Jan 16 11:44:32 YEKT 2010 > > >Description: > > This bug is the place to be to motherboard nForce chipset. > > Copying process from usb stick or usb hdd stops at some time (10 - 50 > seconds). > > dmesg: > Copyright (c) 1992-2010 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.0-STABLE-201001 #0: Sat Jan 16 11:44:32 YEKT 2010 > root@:/usr/src/sys/i386/compile/ALEX_USB i386 > Preloaded elf kernel "/boot/kernel/kernel" at 0xc148a000. > Preloaded elf module "/boot/kernel/linux.ko" at 0xc148a174. > Preloaded elf module "/boot/modules/nvidia.ko" at 0xc148a220. > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 2104406119 Hz > CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2104.41-MHz 686-class > CPU) Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1 > > Features=0x178bfbff CA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x2001 > AMD Features=0xea500800 > AMD Features2=0x11f > Data TLB: 32 entries, fully associative > Instruction TLB: 32 entries, fully associative > L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way > associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, > 8-way associative real memory = 2147483648 (2048 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > 0x0000000001826000 - 0x000000007da9ffff, 2082971648 bytes (508538 pages) > avail memory = 2081628160 (1985 MB) > Table 'FACP' at 0x7fef9d80 > Table 'HPET' at 0x7fef9f80 > Table 'MCFG' at 0x7fefa000 > Table 'APIC' at 0x7fef9ec0 > APIC: Found table at 0x7fef9ec0 > MP Configuration Table version 1.4 found at 0xc00f1400 > APIC: Using the MADT enumerator. > MADT: Found CPU APIC ID 0 ACPI ID 0: enabled > SMP: Added CPU 0 (AP) > MADT: Found CPU APIC ID 1 ACPI ID 1: enabled > SMP: Added CPU 1 (AP) > ACPI APIC Table: > INTR: Adding local APIC 1 as a target > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > bios32: Found BIOS32 Service Directory header at 0xc00fb7d0 > bios32: Entry = 0xf2030 (c00f2030) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xf0000+0x2060 > pnpbios: Found PnP BIOS data at 0xc00fc330 > pnpbios: Entry = f0000:c360 Rev = 1.0 > Other BIOS signatures found: > APIC: CPU 0 has ACPI ID 0 > APIC: CPU 1 has ACPI ID 1 > ULE: setup cpu 0 > ULE: setup cpu 1 > ACPI: RSDP 0xf75e0 00024 (v2 Nvidia) > ACPI: XSDT 0x7fef3100 00044 (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000) > ACPI: FACP 0x7fef9d80 000F4 (v3 Nvidia ASUSACPI 42302E31 AWRD 00000000) > ACPI: DSDT 0x7fef3280 06AC0 (v1 NVIDIA ASUSACPI 00001000 MSFT 03000000) > ACPI: FACS 0x7fef0000 00040 > ACPI: HPET 0x7fef9f80 00038 (v1 Nvidia ASUSACPI 42302E31 AWRD 00000098) > ACPI: MCFG 0x7fefa000 0003C (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000) > ACPI: APIC 0x7fef9ec0 0007C (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000) > MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 > ioapic0: Changing APIC ID to 2 > ioapic0: Routing external 8259A's -> intpin 0 > MADT: Interrupt override: source 0, irq 2 > ioapic0: Routing IRQ 0 -> intpin 2 > MADT: Interrupt override: source 9, irq 9 > ioapic0: intpin 9 trigger: level > MADT: Interrupt override: source 14, irq 14 > MADT: Interrupt override: source 15, irq 15 > lapic0: Routing NMI -> LINT1 > lapic0: LINT1 trigger: edge > lapic0: LINT1 polarity: high > lapic1: Routing NMI -> LINT1 > lapic1: LINT1 trigger: edge > lapic1: LINT1 polarity: high > ioapic0 irqs 0-23 on motherboard > cpu0 BSP: > ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 > wlan: <802.11 Link Layer> > null: > random: > nfslock: pseudo-device > io: > kbd: new array size 4 > kbd1 at kbdmux0 > mem: > Pentium Pro MTRR support enabled > hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 > npx0: INT 16 interface > acpi0: on motherboard > PCIe: Memory Mapped configuration base @ 0xe0000000 > pcibios: BIOS version 3.00 > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 > acpi0: [MPSAFE] > acpi0: [ITHREAD] > AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SMCA -> bus 0 dev 10 func 1 > acpi0: Power Button (fixed) > acpi0: wakeup code va 0xc58bc000 pa 0x1000 > AcpiOsDerivePciId: \\_SB_.PCI0.IGPU.GPUR -> bus 0 dev 5 func 0 > AcpiOsDerivePciId: \\_SB_.PCI0.VT86.PIO1 -> bus 0 dev 10 func 0 > AcpiOsDerivePciId: \\_SB_.PCI0.VT86.PIRQ -> bus 0 dev 10 func 0 > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, 7fdf0000 (3) failed > ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 > pci_link0: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link1: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 5 7 9 10 11 14 15 > Validation 0 5 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link2: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link3: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link4: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 5 7 9 10 11 14 15 > Validation 0 11 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link5: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link6: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link7: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link8: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link9: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link10: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 5 7 9 10 11 14 15 > Validation 0 11 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link11: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link12: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 5 7 9 10 11 14 15 > Validation 0 10 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link13: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link14: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link15: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link16: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link17: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 9 10 11 14 15 > Validation 0 255 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link18: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 5 7 9 10 11 14 15 > Validation 0 5 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link19: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 5 7 9 10 11 14 15 > Validation 0 5 N 0 5 7 9 10 11 14 15 > After Disable 0 255 N 0 5 7 9 10 11 14 15 > pci_link20: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 16 > Validation 0 255 N 0 16 > After Disable 0 255 N 0 16 > pci_link21: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 17 > Validation 0 255 N 0 17 > After Disable 0 255 N 0 17 > pci_link22: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 18 > Validation 0 255 N 0 18 > After Disable 0 255 N 0 18 > pci_link23: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 19 > Validation 0 255 N 0 19 > After Disable 0 255 N 0 19 > pci_link24: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 16 > Validation 0 255 N 0 16 > After Disable 0 255 N 0 16 > pci_link25: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 16 > Validation 0 255 N 0 16 > After Disable 0 255 N 0 16 > pci_link26: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 16 > Validation 0 255 N 0 16 > After Disable 0 255 N 0 16 > pci_link27: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 16 > Validation 0 255 N 0 16 > After Disable 0 255 N 0 16 > pci_link28: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link29: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link30: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link31: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link32: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link33: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link34: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link35: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link36: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link37: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link38: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link39: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > pci_link40: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 20 21 22 23 > Validation 0 255 N 0 20 21 22 23 > After Disable 0 255 N 0 20 21 22 23 > acpi_hpet0: iomem 0xfefff000-0xfefff3ff on > acpi0 acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: > legacy_route Timecounter "HPET" frequency 25000000 Hz quality 900 > acpi_button0: on acpi0 > pcib0: port 0xcf8-0xcff on acpi0 > pci0: on pcib0 > pci0: domain=0, physical bus=0 > found-> vendor=0x10de, dev=0x02f0, revid=0xa2 > domain=0, bus=0, slot=0, func=0 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x02fa, revid=0xa2 > domain=0, bus=0, slot=0, func=1 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x02fe, revid=0xa2 > domain=0, bus=0, slot=0, func=2 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x02f8, revid=0xa2 > domain=0, bus=0, slot=0, func=3 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x02f9, revid=0xa2 > domain=0, bus=0, slot=0, func=4 > class=05-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x02ff, revid=0xa2 > domain=0, bus=0, slot=0, func=5 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x027f, revid=0xa2 > domain=0, bus=0, slot=0, func=6 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0102, statreg=0x0020, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x027e, revid=0xa2 > domain=0, bus=0, slot=0, func=7 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x02fb, revid=0xa1 > domain=0, bus=0, slot=4, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) > lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) > powerspec 2 supports D0 D3 current D0 > MSI supports 2 messages, 64 bit > found-> vendor=0x10de, dev=0x0270, revid=0xa2 > domain=0, bus=0, slot=9, func=0 > class=05-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x0260, revid=0xa3 > domain=0, bus=0, slot=10, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x0264, revid=0xa3 > domain=0, bus=0, slot=10, func=1 > class=0c-05-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=255 > powerspec 2 supports D0 D3 current D0 > map[20]: type I/O Port, range 32, base 0x4c00, size 6, enabled > map[24]: type I/O Port, range 32, base 0x4c40, size 6, enabled > found-> vendor=0x10de, dev=0x0272, revid=0xa3 > domain=0, bus=0, slot=10, func=2 > class=05-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x10de, dev=0x026d, revid=0xa3 > domain=0, bus=0, slot=11, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=a, irq=255 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type Memory, range 32, base 0xfe02f000, size 12, enabled > unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02f000 > ohci early: SMM active, request owner change > found-> vendor=0x10de, dev=0x026e, revid=0xa3 > domain=0, bus=0, slot=11, func=1 > class=0c-03-20, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=b, irq=255 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type Memory, range 32, base 0xfe02e000, size 8, enabled > unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02e000 > found-> vendor=0x10de, dev=0x0265, revid=0xa1 > domain=0, bus=0, slot=13, func=0 > class=01-01-8a, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > powerspec 2 supports D0 D3 current D0 > map[20]: type I/O Port, range 32, base 0xf400, size 4, enabled > found-> vendor=0x10de, dev=0x0266, revid=0xa1 > domain=0, bus=0, slot=14, func=0 > class=01-01-85, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D3 current D0 > MSI supports 4 messages, 64 bit > map[10]: type I/O Port, range 32, base 0x9f0, size 3, enabled > map[14]: type I/O Port, range 32, base 0xbf0, size 2, enabled > map[18]: type I/O Port, range 32, base 0x970, size 3, enabled > map[1c]: type I/O Port, range 32, base 0xb70, size 2, enabled > map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled > map[24]: type Memory, range 32, base 0xfe02d000, size 12, enabled > pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.APSI:0) > pci_link39: Picked IRQ 20 with weight 0 > pcib0: slot 14 INTA routed to irq 20 via \\_SB_.PCI0.APSI > found-> vendor=0x10de, dev=0x0267, revid=0xa1 > domain=0, bus=0, slot=15, func=0 > class=01-01-85, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D3 current D0 > MSI supports 4 messages, 64 bit > map[10]: type I/O Port, range 32, base 0x9e0, size 3, enabled > map[14]: type I/O Port, range 32, base 0xbe0, size 2, enabled > map[18]: type I/O Port, range 32, base 0x960, size 3, enabled > map[1c]: type I/O Port, range 32, base 0xb60, size 2, enabled > map[20]: type I/O Port, range 32, base 0xcc00, size 4, enabled > map[24]: type Memory, range 32, base 0xfe02c000, size 12, enabled > pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.APSJ:0) > pci_link40: Picked IRQ 21 with weight 0 > pcib0: slot 15 INTA routed to irq 21 via \\_SB_.PCI0.APSJ > found-> vendor=0x10de, dev=0x026f, revid=0xa2 > domain=0, bus=0, slot=16, func=0 > class=06-04-01, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns) > found-> vendor=0x10de, dev=0x026c, revid=0xa2 > domain=0, bus=0, slot=16, func=1 > class=04-03-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) > intpin=b, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit, vector masks > map[10]: type Memory, range 32, base 0xfe024000, size 14, enabled > pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.AAZA:0) > pci_link33: Picked IRQ 22 with weight 0 > pcib0: slot 16 INTB routed to irq 22 via \\_SB_.PCI0.AAZA > found-> vendor=0x10de, dev=0x0269, revid=0xa3 > domain=0, bus=0, slot=20, func=0 > class=06-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled > map[14]: type I/O Port, range 32, base 0xc800, size 3, enabled > pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.APCH:0) > pci_link30: Picked IRQ 23 with weight 0 > pcib0: slot 20 INTA routed to irq 23 via \\_SB_.PCI0.APCH > found-> vendor=0x1022, dev=0x1100, revid=0x00 > domain=0, bus=0, slot=24, func=0 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1101, revid=0x00 > domain=0, bus=0, slot=24, func=1 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1102, revid=0x00 > domain=0, bus=0, slot=24, func=2 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1103, revid=0x00 > domain=0, bus=0, slot=24, func=3 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > pci0: at device 0.0 (no driver attached) > pci0: at device 0.1 (no driver attached) > pci0: at device 0.2 (no driver attached) > pci0: at device 0.3 (no driver attached) > pci0: at device 0.4 (no driver attached) > pci0: at device 0.5 (no driver attached) > pci0: at device 0.6 (no driver attached) > pci0: at device 0.7 (no driver attached) > pcib1: at device 4.0 on pci0 > pcib1: domain 0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0xa000-0xafff > pcib1: memory decode 0xfa000000-0xfcffffff > pcib1: prefetched decode 0xd0000000-0xdfffffff > pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.XVRA - > AE_NOT_FOUND pci1: on pcib1 > pci1: domain=0, physical bus=1 > found-> vendor=0x10de, dev=0x0392, revid=0xa1 > domain=0, bus=1, slot=0, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled > pcib1: requested memory range 0xfa000000-0xfaffffff: good > map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, > enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good > map[1c]: type Memory, range 64, base 0xfb000000, size 24, enabled > pcib1: requested memory range 0xfb000000-0xfbffffff: good > map[24]: type I/O Port, range 32, base 0xac00, size 7, enabled > pcib1: requested I/O range 0xac00-0xac7f: in range > pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.APC5:0) > pci_link24: Picked IRQ 16 with weight 0 > pcib0: slot 4 INTA routed to irq 16 via \\_SB_.PCI0.APC5 > pcib1: slot 0 INTA is routed to irq 16 > vgapci0: port 0xac00-0xac7f mem > 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 16 > at device 0.0 on pci1 nvidia0: on vgapci0 > vgapci0: child nvidia0 requested pci_enable_busmaster > vgapci0: child nvidia0 requested pci_enable_io > vgapci0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xfa000000 > vgapci0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xd0000000 > vgapci0: Reserved 0x1000000 bytes for rid 0x1c type 3 at 0xfb000000 > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 > nvidia0: [GIANT-LOCKED] > nvidia0: [ITHREAD] > pci0: at device 9.0 (no driver attached) > isab0: at device 10.0 on pci0 > isa0: on isab0 > pci0: at device 10.1 (no driver attached) > pci0: at device 10.2 (no driver attached) > ohci0: mem 0xfe02f000-0xfe02ffff at device > 11.0 on pci0 pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.APCF:0) > pci_link28: Picked IRQ 20 with weight 1 > pcib0: slot 11 INTA routed to irq 20 via \\_SB_.PCI0.APCF > ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50 > ohci0: [MPSAFE] > ohci0: [ITHREAD] > usbus0: on ohci0 > ehci0: mem 0xfe02e000-0xfe02e0ff at > device 11.1 on pci0 pcib0: matched entry for 0.11.INTB (src > \\_SB_.PCI0.APCL:0) > pci_link36: Picked IRQ 21 with weight 1 > pcib0: slot 11 INTB routed to irq 21 via \\_SB_.PCI0.APCL > ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51 > ehci0: [MPSAFE] > ehci0: [ITHREAD] > usbus1: EHCI version 1.0 > usbus1: on ehci0 > atapci0: port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf400 > ata0: on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=03 ostat0=50 ostat1=00 > ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90 > ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 > ata0: reset tp2 stat0=50 stat1=00 devices=0x1 > ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 52 > ata0: [MPSAFE] > ata0: [ITHREAD] > ata1: on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=03 ostat0=7f ostat1=50 > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb > ata1: reset tp2 stat0=ff stat1=00 devices=0x20000 > ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 53 > ata1: [MPSAFE] > ata1: [ITHREAD] > atapci1: port > 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem > 0xfe02d000-0xfe02dfff irq 20 at device 14.0 on pci0 atapci1: Reserved 0x10 > bytes for rid 0x20 type 4 at 0xe000 > atapci1: [MPSAFE] > atapci1: [ITHREAD] > atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02d000 > ata2: on atapci1 > atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0 > atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0 > ata2: SATA connect time=0ms status=00000123 > ata2: reset tp1 mask=01 ostat0=50 ostat1=00 > ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > ata2: reset tp2 stat0=50 stat1=00 devices=0x1 > ata2: [MPSAFE] > ata2: [ITHREAD] > ata3: on atapci1 > atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970 > atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70 > ata3: SATA connect time=0ms status=00000123 > ata3: reset tp1 mask=01 ostat0=50 ostat1=00 > ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > ata3: reset tp2 stat0=50 stat1=00 devices=0x1 > ata3: [MPSAFE] > ata3: [ITHREAD] > atapci2: port > 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem > 0xfe02c000-0xfe02cfff irq 21 at device 15.0 on pci0 atapci2: Reserved 0x10 > bytes for rid 0x20 type 4 at 0xcc00 > atapci2: [MPSAFE] > atapci2: [ITHREAD] > atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02c000 > ata4: on atapci2 > atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0 > atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0 > ata4: SATA connect timeout status=00000000 > ata4: [MPSAFE] > ata4: [ITHREAD] > ata5: on atapci2 > atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960 > atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60 > ata5: SATA connect timeout status=00000000 > ata5: [MPSAFE] > ata5: [ITHREAD] > pcib2: at device 16.0 on pci0 > pcib2: domain 0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: I/O decode 0xb000-0xbfff > pcib2: memory decode 0xfde00000-0xfdefffff > pcib2: prefetched decode 0xfdd00000-0xfddfffff > pcib2: Subtractively decoded bridge. > pci2: on pcib2 > pci2: domain=0, physical bus=2 > found-> vendor=0x10ec, dev=0x8139, revid=0x10 > domain=0, bus=2, slot=9, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type I/O Port, range 32, base 0xbc00, size 8, enabled > pcib2: requested I/O range 0xbc00-0xbcff: in range > map[14]: type Memory, range 32, base 0xfdeff000, size 8, enabled > pcib2: requested memory range 0xfdeff000-0xfdeff0ff: good > pcib2: matched entry for 2.9.INTA (src \\_SB_.PCI0.APC2:0) > pci_link21: Picked IRQ 17 with weight 0 > pcib2: slot 9 INTA routed to irq 17 via \\_SB_.PCI0.APC2 > rl0: port 0xbc00-0xbcff mem > 0xfdeff000-0xfdeff0ff irq 17 at device 9.0 on pci2 rl0: Reserved 0x100 > bytes for rid 0x10 type 4 at 0xbc00 > miibus0: on rl0 > rlphy0: PHY 0 on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl0: bpf attached > rl0: Ethernet address: 00:c0:df:13:4a:77 > ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 54 > rl0: [MPSAFE] > rl0: [ITHREAD] > pci0: at device 16.1 (no driver attached) > nfe0: port 0xc800-0xc807 mem > 0xfe02b000-0xfe02bfff irq 23 at device 20.0 on pci0 nfe0: Reserved 0x1000 > bytes for rid 0x10 type 3 at 0xfe02b000 > miibus1: on nfe0 > e1000phy0: PHY 1 on miibus1 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto nfe0: bpf attached > nfe0: Ethernet address: 00:1a:92:7c:06:8d > ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55 > nfe0: [MPSAFE] > nfe0: [FILTER] > acpi_tz0: on acpi0 > atrtc0: port 0x70-0x73 on acpi0 > atrtc0: registered as a time-of-day clock (resolution 1000000us) > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 56 > uart0: [FILTER] > uart0: fast interrupt > uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 57 > uart1: [FILTER] > uart1: fast interrupt > ppc0: using extended I/O port range > ppc0: SPP EPP > ppc0: port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 58 > ppc0: [MPSAFE] > ppc0: [ITHREAD] > ppbus0: on ppc0 > plip0: on ppbus0 > plip0: bpf attached > plip0: [MPSAFE] > plip0: [ITHREAD] > lpt0: on ppbus0 > lpt0: [MPSAFE] > lpt0: [ITHREAD] > lpt0: Interrupt-driven port > ppi0: on ppbus0 > psmcpnp0: irq 12 on acpi0 > atkbdc0: port 0x60,0x64 irq 1 on acpi0 > atkbd0: irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: current command byte:0047 > psm0: irq 12 on atkbdc0 > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 60 > psm0: [GIANT-LOCKED] > psm0: [ITHREAD] > psm0: model IntelliMouse, device ID 3-00, 3 buttons > psm0: config:00000000, flags:00000008, packet size:4 > psm0: syncmask:08, syncbits:00 > cpu0: on acpi0 > cpu0: switching to generic Cx mode > powernow0: on cpu0 > powernow0: STATUS: 0x310a120c0a0d020d > powernow0: STATUS: maxfid: 0x0d > powernow0: STATUS: maxvid: 0x0a > device_attach: powernow0 attach returned 6 > cpu1: on acpi0 > powernow1: on cpu1 > powernow1: STATUS: 0x310a120c0a0d020d > powernow1: STATUS: maxfid: 0x0d > powernow1: STATUS: maxvid: 0x0a > device_attach: powernow1 attach returned 6 > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > ahc_isa_probe 0: ioport 0xc00 alloc failed > ahc_isa_probe 4: ioport 0x4c00 alloc failed > ahc_isa_probe 10: ioport 0xac00 alloc failed > ahc_isa_probe 11: ioport 0xbc00 alloc failed > ahc_isa_probe 12: ioport 0xcc00 alloc failed > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > ex_isa_identify() > isa_probe_children: disabling PnP devices > pmtimer0 on isa0 > ata: ata0 already exists; skipping it > ata: ata1 already exists; skipping it > atkbdc: atkbdc0 already exists; skipping it > atrtc: atrtc0 already exists; skipping it > ppc: ppc0 already exists; skipping it > sc: sc0 already exists; skipping it > uart: uart0 already exists; skipping it > uart: uart1 already exists; skipping it > isa_probe_children: probing non-PnP devices > orm0: at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > isa_probe_children: probing PnP devices > Device configuration finished. > Reducing kern.maxvnodes 133529 -> 100000 > procfs registered > lapic: Divisor 2, Frequency 100209823 hz > Timecounter "TSC" frequency 2104406119 Hz quality -100 > Timecounters tick every 1.000 msec > Linux ELF exec handler installed > lo0: bpf attached > hptrr: no controller detected. > ata0: Identifying devices: 00000001 > ata0: New devices: 00000001 > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 480Mbps High Speed USB v2.0 > ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire > ad0: setting UDMA100 > ad0: 114473MB at ata0-master UDMA100 > ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue > GEOM: new disk ad0 > ugen0.1: at usbus0 > uhub0: on usbus0 > ugen1.1: at usbus1 > uhub1: on usbus1 > ad0: nVidia check1 failed > ad0: Adaptec check1 failed > ad0: LSI (v3) check1 failed > ad0: LSI (v2) check1 failed > ad0: FreeBSD check1 failed > ata1: Identifying devices: 00020000 > ata1: New devices: 00020000 > ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire > acd0: setting UDMA66 > acd0: DVDR drive at ata1 as slave > acd0: read 6890KB/s (6890KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, > UDMA66 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet > acd0: Writes: CDR, CDRW, DVDR, test write, burnproof > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > ata2: Identifying devices: 00000001 > ata2: New devices: 00000001 > ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire > ad4: setting UDMA100 > ad4: 76319MB at ata2-master UDMA100 SATA 3Gb/s > ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue > ad4: nVidia check1 failed > ad4: Adaptec check1 failed > ad4: LSI (v3) check1 failed > ad4: LSI (v2) check1 failed > ad4: FreeBSD check1 failed > ata3: Identifying devices: 00000001 > ata3: New devices: 00000001 > ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire > ad6: setting UDMA100 > ad6: 715404MB at ata3-master UDMA100 SATA 3Gb/s > ad6: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth > queue ad6: nVidia check1 failed > ad6: Adaptec check1 failed > ad6: LSI (v3) check1 failed > ad6: LSI (v2) check1 failed > ad6: FreeBSD check1 failed > ata4: Identifying devices: 00000000 > ata4: New devices: 00000000 > ata5: Identifying devices: 00000000 > ata5: New devices: 00000000 > ATA PseudoRAID loaded > SMP: AP CPU #1 Launched! > cpu1 AP: > ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 > ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48 > ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 1 vector 49 > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 50 > ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 51 > ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 52 > ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 53 > GEOM: new disk ad4 > GEOM: new disk ad6 > uhub0: 8 ports with 8 removable, self powered > uhub1: 8 ports with 8 removable, self powered > ugen1.2: at usbus1 > umass0: on usbus1 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:0:0:-1: Attached to scbus0 > GEOM: new disk da0 > pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0 > pass0: Fixed Direct Access SCSI-4 device > pass0: Serial Number 2GEWDLZ4 > pass0: 40.000MB/s transfers > da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 > da0: Fixed Direct Access SCSI-4 device > da0: Serial Number 2GEWDLZ4 > da0: 40.000MB/s transfers > da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C) > Trying to mount root from ufs:/dev/da0s1a > ct_to_ts([2010-01-27 20:41:07]) = 1264624867.000000000 > start_init: trying /sbin/init > linprocfs registered > splash: image decoder found: daemon_saver > rl0: link state changed to UP > ugen1.3: at usbus1 > umass1: on > usbus1 umass1: SCSI over Bulk-Only; quirks = 0x0100 > umass1:1:1:-1: Attached to scbus1 > (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error > (probe0:umass-sim1:1:0:0): SCSI Status: Check Condition > (probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 > (probe0:umass-sim1:1:0:0): Not ready to ready change, medium may have > changed (probe0:umass-sim1:1:0:0): (probe0:umass-sim1:1:0:0): TEST UNIT > READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 > (probe0:umass-sim1:1:0:0): Not ready to ready change, medium may have > changed Retrying Command (per Sense Data) > (probe0:umass-sim1:1:0:0): Retrying Command > GEOM: new disk da1 > pass1 at umass-sim1 bus 1 scbus1 target 0 lun 0 > pass1: Removable Direct Access SCSI-2 device > pass1: Serial Number 00000000 > pass1: 40.000MB/s transfers > da1 at umass-sim1 bus 1 scbus1 target 0 lun 0 > da1: Removable Direct Access SCSI-2 device > da1: Serial Number 00000000 > da1: 40.000MB/s transfers > da1: 1960MB (4014080 512 byte sectors: 255H 63S/T 249C) > (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (da0:umass-sim0:0:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (da0:umass-sim0:0:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Retrying Command > (da1:umass-sim1:1:0:0): Request completed with CAM_REQ_CMP_ERR > (da1:umass-sim1:1:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (da0:umass-sim0:0:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (da0:umass-sim0:0:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (da0:umass-sim0:0:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (da0:umass-sim0:0:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > (da0:umass-sim0:0:0:0): Retrying Command > (da0:umass-sim0:0:0:0): Retrying Command > > pciconf -lv > > none0@pci0:0:0:0: class=0x050000 card=0x81c01043 chip=0x02f010de rev=0xa2 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'C51 Host Bridge' > class = memory > subclass = RAM > none1@pci0:0:0:1: class=0x050000 card=0x81c01043 chip=0x02fa10de rev=0xa2 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'C51 Memory Controller 0' > class = memory > subclass = RAM > none2@pci0:0:0:2: class=0x050000 card=0x81c01043 chip=0x02fe10de rev=0xa2 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'C51 Memory Controller 1' > class = memory > subclass = RAM > none3@pci0:0:0:3: class=0x050000 card=0x81c01043 chip=0x02f810de rev=0xa2 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'C51 Memory Controller 5' > class = memory > subclass = RAM > none4@pci0:0:0:4: class=0x050000 card=0x81c01043 chip=0x02f910de rev=0xa2 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'C51 Memory Controller 4' > class = memory > subclass = RAM > none5@pci0:0:0:5: class=0x050000 card=0x81c01043 chip=0x02ff10de rev=0xa2 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'C51 Host Bridge' > class = memory > subclass = RAM > none6@pci0:0:0:6: class=0x050000 card=0x81c01043 chip=0x027f10de rev=0xa2 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'C51 Memory Controller 3' > class = memory > subclass = RAM > none7@pci0:0:0:7: class=0x050000 card=0x81c01043 chip=0x027e10de rev=0xa2 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'C51 Memory Controller 2' > class = memory > subclass = RAM > pcib1@pci0:0:4:0: class=0x060400 card=0x000010de chip=0x02fb10de rev=0xa1 > hdr=0x01 vendor = 'Nvidia Corp' > device = 'C51 PCIe Bridge' > class = bridge > subclass = PCI-PCI > none8@pci0:0:9:0: class=0x050000 card=0x81c01043 chip=0x027010de rev=0xa2 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'MCP51 Host Bridge' > class = memory > subclass = RAM > isab0@pci0:0:10:0: class=0x060100 card=0x81c01043 chip=0x026010de rev=0xa3 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'MCP51 LPC Bridge' > class = bridge > subclass = PCI-ISA > none9@pci0:0:10:1: class=0x0c0500 card=0x81c01043 chip=0x026410de rev=0xa3 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'NVIDIA nForce PCI System Management (NVIDIA SMB Bus > Controller)' class = serial bus > subclass = SMBus > none10@pci0:0:10:2: class=0x050000 card=0x81c01043 chip=0x027210de rev=0xa3 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'MCP51 Memory Controller 0' > class = memory > subclass = RAM > ohci0@pci0:0:11:0: class=0x0c0310 card=0x81c01043 chip=0x026d10de rev=0xa3 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'MCP51 USB Controller' > class = serial bus > subclass = USB > ehci0@pci0:0:11:1: class=0x0c0320 card=0x81c01043 chip=0x026e10de rev=0xa3 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'MCP51 USB Controller' > class = serial bus > subclass = USB > atapci0@pci0:0:13:0: class=0x01018a card=0x81c01043 chip=0x026510de > rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' > device = 'MCP51 Parallel ATA Controller' > class = mass storage > subclass = ATA > atapci1@pci0:0:14:0: class=0x010185 card=0x81c01043 chip=0x026610de > rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' > device = 'NVIDIA nForce 430/410 Serial ATA Controller (MCP51S)' > class = mass storage > subclass = ATA > atapci2@pci0:0:15:0: class=0x010185 card=0x81c01043 chip=0x026710de > rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' > device = 'NVIDIA nForce 430/410 Serial ATA Controller (MCP51S)' > class = mass storage > subclass = ATA > pcib2@pci0:0:16:0: class=0x060401 card=0x00000000 chip=0x026f10de rev=0xa2 > hdr=0x01 vendor = 'Nvidia Corp' > device = 'MCP51 PCI Bridge' > class = bridge > subclass = PCI-PCI > none11@pci0:0:16:1: class=0x040300 card=0x81cb1043 chip=0x026c10de rev=0xa2 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'MCP51 High Definition Audio' > class = multimedia > subclass = HDA > nfe0@pci0:0:20:0: class=0x068000 card=0x816a1043 chip=0x026910de rev=0xa3 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'MCP51 Ethernet Controller (2A34103C)' > class = bridge > hostb0@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 > hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport > Technology Configuration' class = bridge > subclass = HOST-PCI > hostb1@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 > hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon64/Opteron/Sempron (K8 Family) Address Map' > class = bridge > subclass = HOST-PCI > hostb2@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 > hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon64/Opteron/Sempron (K8 Family) DRAM Controller' > class = bridge > subclass = HOST-PCI > hostb3@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 > hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous > Control' class = bridge > subclass = HOST-PCI > vgapci0@pci0:1:0:0: class=0x030000 card=0x341a1458 chip=0x039210de rev=0xa1 > hdr=0x00 vendor = 'Nvidia Corp' > device = 'NVIDIA GeForce 7600 GS (NVIDIA GeForce 7600 GS)' > class = display > subclass = VGA > rl0@pci0:2:9:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10 > hdr=0x00 vendor = 'Realtek Semiconductor' > device = 'Realtek RTL8139 Family PCI Fast Ethernet NIC > (RTL-8139/8139C/8139C)' class = network > subclass = ethernet > > >How-To-Repeat: > > Install FreeBSD 8.0-RELEASE or 8.0-STABLE-201001 to motherboard nForce > chipset. Let GA-M56S-S3 or or any nForce430,560,630... Install mc. Mount > usb stick and copy group files about 600Mb. Copying process but freeze. > > >Fix: > > Problem fix: turn off usb 2.0 in BIOS or hw.usb.ehci.no_hs=1. USB1.0 work > slow, problem not found. :( FreeBSD 7.2 worked normal, not problem. Hi, Your USB 2.0 controller most likely has the lost interrupt bug. Try adding your USB 2.0 controller to the list of devices quirked in: src/sys/dev/usb/controller/ehci_pci.c: /* Dropped interrupts workaround */ switch (pci_get_vendor(self)) { case PCI_EHCI_VENDORID_ATI: case PCI_EHCI_VENDORID_VIA: sc->sc_flags |= EHCI_SCFLG_LOSTINTRBUG; if (bootverbose) device_printf(self, "Dropped interrupts workaround enabled\n"); break; default: break; } --HPS From: Crazy Alex To: bug-followup@FreeBSD.org, crazyalexnt@inbox.ru Cc: Subject: Re: usb/143294: copying process stops at some time (10 - 50 seconds) from usb disk only nForce motherboards in 8.0-RELEASE/STABLE Date: Fri, 29 Jan 2010 10:54:29 +0500 > Hi, > > Your USB 2.0 controller most likely has the lost interrupt bug. Try adding > your USB 2.0 controller to the list of devices quirked in: > > src/sys/dev/usb/controller/ehci_pci.c: > > /* Dropped interrupts workaround */ > switch (pci_get_vendor(self)) { > case PCI_EHCI_VENDORID_ATI: > case PCI_EHCI_VENDORID_VIA: > sc->sc_flags |= EHCI_SCFLG_LOSTINTRBUG; > if (bootverbose) > device_printf(self, > "Dropped interrupts workaround enabled\n"); > break; > default: > break; > } Hello I adding my USB 2.0 controller to the list of devices quirked in: /* Dropped interrupts workaround */ switch (pci_get_vendor(self)) { case PCI_EHCI_VENDORID_ATI: case PCI_EHCI_VENDORID_VIA: case PCI_EHCI_VENDORID_NVIDIA: case PCI_EHCI_VENDORID_NVIDIA2: sc->sc_flags |= EHCI_SCFLG_LOSTINTRBUG; if (bootverbose) device_printf(self, "Dropped interrupts workaround enabled\n"); break; default: break; } ... and recompile the kernel. This correctly? Then the problem has not disappeared, when copying from usb stick and usb hdd copy process stops at the time from several seconds to several minutes. I added in /boot/loader.conf options: boot_verbose="YES" debug.bootverbose="1" I tried to work with the usb disks, here is my dmesg: Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE-201001 #1: Thu Jan 28 11:22:51 YEKT 2010 alex@ALEXF.WORKGROUP:/usr/src/sys/i386/compile/ALEX_USB i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f79000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2104398412 Hz CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2104.40-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1 Features=0x178bfbff Features2=0x2001 AMD Features=0xea500800 AMD Features2=0x11f Data TLB: 32 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001026000 - 0x000000007da9ffff, 2091360256 bytes (510586 pages) avail memory = 2090049536 (1993 MB) Table 'FACP' at 0x7fef9d80 Table 'HPET' at 0x7fef9f80 Table 'MCFG' at 0x7fefa000 Table 'APIC' at 0x7fef9ec0 APIC: Found table at 0x7fef9ec0 MP Configuration Table version 1.4 found at 0xc00f1400 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 bios32: Found BIOS32 Service Directory header at 0xc00fb7d0 bios32: Entry = 0xf2030 (c00f2030) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x2060 pnpbios: Found PnP BIOS data at 0xc00fc330 pnpbios: Entry = f0000:c360 Rev = 1.0 Other BIOS signatures found: ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf75e0 00024 (v2 Nvidia) ACPI: XSDT 0x7fef3100 00044 (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: FACP 0x7fef9d80 000F4 (v3 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: DSDT 0x7fef3280 06AC0 (v1 NVIDIA ASUSACPI 00001000 MSFT 03000000) ACPI: FACS 0x7fef0000 00040 ACPI: HPET 0x7fef9f80 00038 (v1 Nvidia ASUSACPI 42302E31 AWRD 00000098) ACPI: MCFG 0x7fefa000 0003C (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: APIC 0x7fef9ec0 0007C (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level MADT: Interrupt override: source 14, irq 14 MADT: Interrupt override: source 15, irq 15 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device io: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 npx0: INT 16 interface acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 pcibios: BIOS version 3.00 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SMCA -> bus 0 dev 10 func 1 acpi0: Power Button (fixed) acpi0: wakeup code va 0xc50bc000 pa 0x1000 AcpiOsDerivePciId: \\_SB_.PCI0.IGPU.GPUR -> bus 0 dev 5 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.VT86.PIO1 -> bus 0 dev 10 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.VT86.PIRQ -> bus 0 dev 10 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fdf0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 9 10 11 14 15 Validation 0 5 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 14 15 Validation 0 11 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 14 15 Validation 0 11 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 5 7 9 10 11 14 15 Validation 0 10 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 9 10 11 14 15 Validation 0 255 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 9 10 11 14 15 Validation 0 5 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link19: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 9 10 11 14 15 Validation 0 5 N 0 5 7 9 10 11 14 15 After Disable 0 255 N 0 5 7 9 10 11 14 15 pci_link20: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link21: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 17 Validation 0 255 N 0 17 After Disable 0 255 N 0 17 pci_link22: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 18 Validation 0 255 N 0 18 After Disable 0 255 N 0 18 pci_link23: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 19 Validation 0 255 N 0 19 After Disable 0 255 N 0 19 pci_link24: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link25: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link26: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link27: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 Validation 0 255 N 0 16 After Disable 0 255 N 0 16 pci_link28: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link29: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link30: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link31: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link32: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link33: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link34: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link35: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link36: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link37: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link38: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link39: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 pci_link40: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 20 21 22 23 Validation 0 255 N 0 20 21 22 23 After Disable 0 255 N 0 20 21 22 23 acpi_hpet0: iomem 0xfefff000-0xfefff3ff on acpi0 acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x10de, dev=0x02f0, revid=0xa2 domain=0, bus=0, slot=0, func=0 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fa, revid=0xa2 domain=0, bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fe, revid=0xa2 domain=0, bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02f8, revid=0xa2 domain=0, bus=0, slot=0, func=3 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02f9, revid=0xa2 domain=0, bus=0, slot=0, func=4 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02ff, revid=0xa2 domain=0, bus=0, slot=0, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x027f, revid=0xa2 domain=0, bus=0, slot=0, func=6 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0102, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x027e, revid=0xa2 domain=0, bus=0, slot=0, func=7 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fb, revid=0xa1 domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0270, revid=0xa2 domain=0, bus=0, slot=9, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0260, revid=0xa3 domain=0, bus=0, slot=10, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0264, revid=0xa3 domain=0, bus=0, slot=10, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x4c00, size 6, enabled map[24]: type I/O Port, range 32, base 0x4c40, size 6, enabled found-> vendor=0x10de, dev=0x0272, revid=0xa3 domain=0, bus=0, slot=10, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x026d, revid=0xa3 domain=0, bus=0, slot=11, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02f000, size 12, enabled unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02f000 ohci early: SMM active, request owner change found-> vendor=0x10de, dev=0x026e, revid=0xa3 domain=0, bus=0, slot=11, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02e000, size 8, enabled unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02e000 found-> vendor=0x10de, dev=0x0265, revid=0xa1 domain=0, bus=0, slot=13, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xf400, size 4, enabled found-> vendor=0x10de, dev=0x0266, revid=0xa1 domain=0, bus=0, slot=14, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9f0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbf0, size 2, enabled map[18]: type I/O Port, range 32, base 0x970, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb70, size 2, enabled map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled map[24]: type Memory, range 32, base 0xfe02d000, size 12, enabled pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.APSI:0) pci_link39: Picked IRQ 20 with weight 0 pcib0: slot 14 INTA routed to irq 20 via \\_SB_.PCI0.APSI found-> vendor=0x10de, dev=0x0267, revid=0xa1 domain=0, bus=0, slot=15, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9e0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbe0, size 2, enabled map[18]: type I/O Port, range 32, base 0x960, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb60, size 2, enabled map[20]: type I/O Port, range 32, base 0xcc00, size 4, enabled map[24]: type Memory, range 32, base 0xfe02c000, size 12, enabled pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.APSJ:0) pci_link40: Picked IRQ 21 with weight 0 pcib0: slot 15 INTA routed to irq 21 via \\_SB_.PCI0.APSJ found-> vendor=0x10de, dev=0x026f, revid=0xa2 domain=0, bus=0, slot=16, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns) found-> vendor=0x10de, dev=0x026c, revid=0xa2 domain=0, bus=0, slot=16, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks map[10]: type Memory, range 32, base 0xfe024000, size 14, enabled pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.AAZA:0) pci_link33: Picked IRQ 22 with weight 0 pcib0: slot 16 INTB routed to irq 22 via \\_SB_.PCI0.AAZA found-> vendor=0x10de, dev=0x0269, revid=0xa3 domain=0, bus=0, slot=20, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled map[14]: type I/O Port, range 32, base 0xc800, size 3, enabled pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.APCH:0) pci_link30: Picked IRQ 23 with weight 0 pcib0: slot 20 INTA routed to irq 23 via \\_SB_.PCI0.APCH found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 0.3 (no driver attached) pci0: at device 0.4 (no driver attached) pci0: at device 0.5 (no driver attached) pci0: at device 0.6 (no driver attached) pci0: at device 0.7 (no driver attached) pcib1: at device 4.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xa000-0xafff pcib1: memory decode 0xfa000000-0xfcffffff pcib1: prefetched decode 0xd0000000-0xdfffffff pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.XVRA - AE_NOT_FOUND pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0392, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled pcib1: requested memory range 0xfa000000-0xfaffffff: good map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[1c]: type Memory, range 64, base 0xfb000000, size 24, enabled pcib1: requested memory range 0xfb000000-0xfbffffff: good map[24]: type I/O Port, range 32, base 0xac00, size 7, enabled pcib1: requested I/O range 0xac00-0xac7f: in range pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.APC5:0) pci_link24: Picked IRQ 16 with weight 0 pcib0: slot 4 INTA routed to irq 16 via \\_SB_.PCI0.APC5 pcib1: slot 0 INTA is routed to irq 16 vgapci0: port 0xac00-0xac7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 16 at device 0.0 on pci1 pci0: at device 9.0 (no driver attached) isab0: at device 10.0 on pci0 isa0: on isab0 pci0: at device 10.1 (no driver attached) pci0: at device 10.2 (no driver attached) ohci0: mem 0xfe02f000-0xfe02ffff at device 11.0 on pci0 pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.APCF:0) pci_link28: Picked IRQ 20 with weight 1 pcib0: slot 11 INTA routed to irq 20 via \\_SB_.PCI0.APCF ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: on ohci0 ehci0: mem 0xfe02e000-0xfe02e0ff at device 11.1 on pci0 pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.APCL:0) pci_link36: Picked IRQ 21 with weight 1 pcib0: slot 11 INTB routed to irq 21 via \\_SB_.PCI0.APCL ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50 ehci0: [MPSAFE] ehci0: [ITHREAD] ehci0: Dropped interrupts workaround enabled usbus1: EHCI version 1.0 usbus1: on ehci0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf400 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 51 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=7f ostat1=50 ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=ff stat1=00 devices=0x20000 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 52 ata1: [MPSAFE] ata1: [ITHREAD] atapci1: port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 20 at device 14.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02d000 ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0 ata2: SATA connect time=0ms status=00000123 ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70 ata3: SATA connect time=0ms status=00000123 ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: [MPSAFE] ata3: [ITHREAD] atapci2: port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 21 at device 15.0 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc00 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02c000 ata4: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0 ata4: SATA connect timeout status=00000000 ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60 ata5: SATA connect timeout status=00000000 ata5: [MPSAFE] ata5: [ITHREAD] pcib2: at device 16.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xb000-0xbfff pcib2: memory decode 0xfde00000-0xfdefffff pcib2: prefetched decode 0xfdd00000-0xfddfffff pcib2: Subtractively decoded bridge. pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x10ec, dev=0x8139, revid=0x10 domain=0, bus=2, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xbc00, size 8, enabled pcib2: requested I/O range 0xbc00-0xbcff: in range map[14]: type Memory, range 32, base 0xfdeff000, size 8, enabled pcib2: requested memory range 0xfdeff000-0xfdeff0ff: good pcib2: matched entry for 2.9.INTA (src \\_SB_.PCI0.APC2:0) pci_link21: Picked IRQ 17 with weight 0 pcib2: slot 9 INTA routed to irq 17 via \\_SB_.PCI0.APC2 rl0: port 0xbc00-0xbcff mem 0xfdeff000-0xfdeff0ff irq 17 at device 9.0 on pci2 rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xbc00 miibus0: on rl0 rlphy0: PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:c0:df:13:4a:77 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 53 rl0: [MPSAFE] rl0: [ITHREAD] pci0: at device 16.1 (no driver attached) nfe0: port 0xc800-0xc807 mem 0xfe02b000-0xfe02bfff irq 23 at device 20.0 on pci0 nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 miibus1: on nfe0 e1000phy0: PHY 1 on miibus1 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: bpf attached nfe0: Ethernet address: 00:1a:92:7c:06:8d ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 54 nfe0: [MPSAFE] nfe0: [FILTER] acpi_tz0: on acpi0 atrtc0: port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 55 uart0: [FILTER] uart0: fast interrupt uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 56 uart1: [FILTER] uart1: fast interrupt ppc0: using extended I/O port range ppc0: SPP EPP ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 57 ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached plip0: [MPSAFE] plip0: [ITHREAD] lpt0: on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: on ppbus0 psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 59 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 cpu0: on acpi0 cpu0: switching to generic Cx mode powernow0: on cpu0 powernow0: STATUS: 0x310a120c0a0d020d powernow0: STATUS: maxfid: 0x0d powernow0: STATUS: maxvid: 0x0a device_attach: powernow0 attach returned 6 cpu1: on acpi0 powernow1: on cpu1 powernow1: STATUS: 0x310a120c0a0d020d powernow1: STATUS: maxfid: 0x0d powernow1: STATUS: maxvid: 0x0a device_attach: powernow1 attach returned 6 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it uart: uart1 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 134041 -> 100000 procfs registered lapic: Divisor 2, Frequency 100209460 hz Timecounter "TSC" frequency 2104398412 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00000001 ata0: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting UDMA100 ad0: 114473MB at ata0-master UDMA100 ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ad0: nVidia check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1: Identifying devices: 00020000 ata1: New devices: 00020000 ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire acd0: setting UDMA66 acd0: DVDR drive at ata1 as slave acd0: read 6890KB/s (6890KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA66 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2: Identifying devices: 00000001 ata2: New devices: 00000001 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: setting UDMA100 ad4: 76319MB at ata2-master UDMA100 SATA 3Gb/s ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: nVidia check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00000001 ata3: New devices: 00000001 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: setting UDMA100 ad6: 715404MB at ata3-master UDMA100 SATA 3Gb/s ad6: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue ad6: nVidia check1 failed ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000000 ata5: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48 ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 1 vector 49 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 50 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 51 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 52 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 53 GEOM: new disk ad4 GEOM: new disk ad6 uhub0: 8 ports with 8 removable, self powered uhub1: 8 ports with 8 removable, self powered ugen1.2: at usbus1 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0 pass0: Fixed Direct Access SCSI-4 device pass0: Serial Number 2GEWDLZ4 pass0: 40.000MB/s transfers GEOM: new disk da0 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Fixed Direct Access SCSI-4 device da0: Serial Number 2GEWDLZ4 da0: 40.000MB/s transfers da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C) Trying to mount root from ufs:/dev/da0s1a ct_to_ts([2010-01-29 07:10:24]) = 1264749024.000000000 start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered rl0: link state changed to UP splash: image decoder found: daemon_saver ugen1.3: at usbus1 umass1: on usbus1 umass1: SCSI over Bulk-Only; quirks = 0x0100 umass1:1:1:-1: Attached to scbus1 (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI Status: Check Condition (probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (probe0:umass-sim1:1:0:0): Not ready to ready change, medium may have changed (probe0:umass-sim1:1:0:0): (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (probe0:umass-sim1:1:0:0): Not ready to ready change, medium may have changed Retrying Command (per Sense Data) (probe0:umass-sim1:1:0:0): Retrying Command pass1 at umass-sim1 bus 1 scbus1 target 0 lun 0 pass1: Removable Direct Access SCSI-2 device pass1: Serial Number 00000000 pass1: 40.000MB/s transfers GEOM: new disk da1 da1 at umass-sim1 bus 1 scbus1 target 0 lun 0 da1: Removable Direct Access SCSI-2 device da1: Serial Number 00000000 da1: 40.000MB/s transfers da1: 1960MB (4014080 512 byte sectors: 255H 63S/T 249C) (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (da0:umass-sim0:0:0:0): Retrying Command (da0:umass-sim0:0:0:0): Retrying Command (da1:umass-sim1:1:0:0): Request completed with CAM_REQ_CMP_ERR (da1:umass-sim1:1:0:0): Retrying Command lines "Request completed with CAM_REQ_CMP_ERR" appear at the time of stopping copying. --- Then I removed from / boot / loader.conf line debugging, reboot, and changed the setting hw.usb.ehci.debug = 1. Dmesg: Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE-201001 #1: Thu Jan 28 11:22:51 YEKT 2010 alex@ALEXF.WORKGROUP:/usr/src/sys/i386/compile/ALEX_USB i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2104.40-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1 Features=0x178bfbff Features2=0x2001 AMD Features=0xea500800 AMD Features2=0x11f real memory = 2147483648 (2048 MB) avail memory = 2090049536 (1993 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fdf0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_hpet0: iomem 0xfefff000-0xfefff3ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 0.3 (no driver attached) pci0: at device 0.4 (no driver attached) pci0: at device 0.5 (no driver attached) pci0: at device 0.6 (no driver attached) pci0: at device 0.7 (no driver attached) pcib1: at device 4.0 on pci0 pci1: on pcib1 vgapci0: port 0xac00-0xac7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 16 at device 0.0 on pci1 pci0: at device 9.0 (no driver attached) isab0: at device 10.0 on pci0 isa0: on isab0 pci0: at device 10.1 (no driver attached) pci0: at device 10.2 (no driver attached) ohci0: mem 0xfe02f000-0xfe02ffff at device 11.0 on pci0 ohci0: [ITHREAD] usbus0: on ohci0 ehci0: mem 0xfe02e000-0xfe02e0ff at device 11.1 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: on ehci0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0 ata0: on atapci0 ata0: [ITHREAD] ata1: on atapci0 ata1: [ITHREAD] atapci1: port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 20 at device 14.0 on pci0 atapci1: [ITHREAD] ata2: on atapci1 ata2: [ITHREAD] ata3: on atapci1 ata3: [ITHREAD] atapci2: port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 21 at device 15.0 on pci0 atapci2: [ITHREAD] ata4: on atapci2 ata4: [ITHREAD] ata5: on atapci2 ata5: [ITHREAD] pcib2: at device 16.0 on pci0 pci2: on pcib2 rl0: port 0xbc00-0xbcff mem 0xfdeff000-0xfdeff0ff irq 17 at device 9.0 on pci2 miibus0: on rl0 rlphy0: PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:c0:df:13:4a:77 rl0: [ITHREAD] pci0: at device 16.1 (no driver attached) nfe0: port 0xc800-0xc807 mem 0xfe02b000-0xfe02bfff irq 23 at device 20.0 on pci0 miibus1: on nfe0 e1000phy0: PHY 1 on miibus1 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: Ethernet address: 00:1a:92:7c:06:8d nfe0: [FILTER] acpi_tz0: on acpi0 atrtc0: port 0x70-0x73 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppc0: [ITHREAD] ppbus0: on ppc0 plip0: on ppbus0 plip0: [ITHREAD] lpt0: on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: on ppbus0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 cpu0: on acpi0 powernow0: on cpu0 device_attach: powernow0 attach returned 6 cpu1: on acpi0 powernow1: on cpu1 device_attach: powernow1 attach returned 6 pmtimer0 on isa0 orm0: at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ad0: 114473MB at ata0-master UDMA100 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 acd0: DVDR at ata1-slave UDMA66 ad4: 76319MB at ata2-master UDMA100 SATA 3Gb/s ad6: 715404MB at ata3-master UDMA100 SATA 3Gb/s SMP: AP CPU #1 Launched! uhub0: 8 ports with 8 removable, self powered uhub1: 8 ports with 8 removable, self powered ugen1.2: at usbus1 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Fixed Direct Access SCSI-4 device da0: 40.000MB/s transfers da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C) Trying to mount root from ufs:/dev/da0s1a rl0: link state changed to UP ugen1.3: at usbus1 umass1: on usbus1 umass1: SCSI over Bulk-Only; quirks = 0x0100 umass1:1:1:-1: Attached to scbus1 (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI Status: Check Condition (probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (probe0:umass-sim1:1:0:0): Not ready to ready change, medium may have changed (probe0:umass-sim1:1:0:0): Retrying Command (per Sense Data) da1 at umass-sim1 bus 1 scbus1 target 0 lun 0 da1: Removable Direct Access SCSI-2 device da1: 40.000MB/s transfers da1: 1960MB (4014080 512 byte sectors: 255H 63S/T 249C) ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_timeout: xfer=0xc5d903c8 ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_timeout: xfer=0xc5d906b8 ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_timeout: xfer=0xc5d906b8 ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: Async is active ehci_set_hw_power: ehci_set_hw_power: ehci_set_hw_power: Async is active Lines "ehci_timeout" appear at the time of stopping copying. --- I immediately load the FreeBSD 7.2 and is actively working with the usb stick and usb hdd, everything works fine. Hence, I conclude that the problem lies in the new USB subsystem of FreeBSD 8.0. Two of my friends motherboards based on chipset nForce, there has been a similar problem with USB devices in FreeBSD 8.0. However, when working with a motherboard based on Intel in FreeBSD 8.0 no problems there. From what I conclude that the blame for not working correctly USB subsystem on chip nForce ... If in usb controllers nForce what was either a bug, it would have manifested in FreeBSD 7.2 is not that so? I really like FreeBSD, but I am concerned about recent developments in the USB subsystem. Please check carefully working USB subsystem on the chip and nForce ispravte error resulting in the inability to fully work with the usb hdd. Sorry for my bad English... :) From: Crazy Alex To: bug-followup@FreeBSD.org, crazyalexnt@inbox.ru Cc: Subject: Re: usb/143294: copying process stops at some time (10 - 50 seconds) from usb disk only nForce motherboards in 8.0-RELEASE/STABLE Date: Fri, 29 Jan 2010 21:54:15 +0500 Hi, This patch only adds the output message? Please advice, what do I do next? From: Hans Petter Selasky To: freebsd-usb@freebsd.org Cc: Alexey , freebsd-gnats-submit@freebsd.org Subject: Re: usb/143294: copying process stops at some time (10 - 50 seconds) from usb disk only nForce motherboards in 8.0-RELEASE/STABLE Date: Sun, 7 Feb 2010 19:55:55 +0100 Hi, A fix for your problem has now been committed to USB P4. Please test and report back! http://p4web.freebsd.org/chv.cgi?CH=174455 http://perforce.freebsd.org/chv.cgi?CH=174455 --HPS State-Changed-From-To: open->feedback State-Changed-By: linimon State-Changed-When: Mon Feb 8 06:24:28 UTC 2010 State-Changed-Why: To submitter: did the commited patch fix your problem? http://www.freebsd.org/cgi/query-pr.cgi?pr=143294 From: Crazy Alex To: bug-followup@FreeBSD.org, crazyalexnt@inbox.ru Cc: Subject: Re: usb/143294: [usb8] copying process stops at some time (10 - 50 seconds) from usb disk only nForce motherboards in 8.0-RELEASE/STABLE Date: Tue, 09 Feb 2010 09:03:13 +0500 http://p4web.freebsd.org/chv.cgi?CH=174455 http://perforce.freebsd.org/chv.cgi?CH=174455 Yes, this solves the problem on nForce chipsets! >Unformatted: