From nobody Mon Apr 27 15:34:13 1998 Received: (from nobody@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA27531; Mon, 27 Apr 1998 15:34:13 -0700 (PDT) (envelope-from nobody) Message-Id: <199804272234.PAA27531@hub.freebsd.org> Date: Mon, 27 Apr 1998 15:34:13 -0700 (PDT) From: adm@dlc.cybertime.ch To: freebsd-gnats-submit@freebsd.org Subject: 3C589D does not work with pccardd, works otherwise (using zp0) X-Send-Pr-Version: www-1.0 >Number: 6431 >Category: kern >Synopsis: 3C589D does not work with pccardd, works otherwise (using zp0) >Confidential: no >Severity: serious >Priority: low >Responsible: freebsd-bugs >State: closed >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Apr 27 15:40:00 PDT 1998 >Closed-Date: Wed Apr 29 07:37:32 PDT 1998 >Last-Modified: Wed Apr 29 07:39:04 PDT 1998 >Originator: Rico Pajarol >Release: 2.2.6 >Organization: Cybertime Informatik GmbH >Environment: FreeBSD tecra.dlc.cybertime.ch 2.2.6-RELEASE FreeBSD 2.2.6-RELEASE #0: Mon Apr 2 7 19:09:48 CEST 1998 root@tecra.dlc.cybertime.ch:/usr/src/sys/compile/TECRA i386 >Description: 3C589D ethernet card works using zp0 (int 10, io 0x300, mem 0xd8000) if the kernel was compiled without card0. If zp0 is enabled, pcic0 compiled into the kernel and the card in the slot, it hangs during bootup after saying 'Enable PC-card.Doing initial network setup: hostname.' If the card is hot-plugged later, it says 'pccardd[45]: driver allocation failed for 3Com Corporation'. If I leave out zp0 completely I get the same result as when hot-plugging. Other pcmcia cards work ok. I tried every combination of pccard options in the kernel that i could imagine. I also tried to change /etc/pccard.conf to use zp0 instead of ep0 for this card or leave this card allone. I tried to compile without pcic0. I also tried the generic PCMCIA kernel. The laptop is a Toshiba Tecra 730CDT. >How-To-Repeat: reboot or re-insert the card. >Fix: Leave card0 out when compiling the kernel. But then all other pcmcia card doesn't work anymore... (Adaptec SlimSCSI) ->2 Kernels: one with support for the Ethernet card, and one for the rest. >Release-Note: >Audit-Trail: From: Garrett Wollman To: adm@dlc.cybertime.ch Cc: freebsd-gnats-submit@FreeBSD.ORG Subject: kern/6431: 3C589D does not work with pccardd, works otherwise (using zp0) Date: Mon, 27 Apr 1998 22:02:11 -0400 (EDT) < If the card is hot-plugged later, it says 'pccardd[45]: driver allocation > failed for 3Com Corporation'. You need to update the pccard.conf file. My 3C589D works just fine (or did last I used it, which was earlier today). -GAWollman -- Garrett A. Wollman | O Siem / We are all family / O Siem / We're all the same wollman@lcs.mit.edu | O Siem / The fires of freedom Opinions not those of| Dance in the burning flame MIT, LCS, CRS, or NSA| - Susan Aglukark and Chad Irschick State-Changed-From-To: open->closed State-Changed-By: phk State-Changed-When: Wed Apr 29 07:37:32 PDT 1998 State-Changed-Why: Pilot error I think. You are not supposed to have either of zp0 or ze0 in a kernel which also has the pccard support. >Unformatted: