From pw@snoopy.mv.com Sat Feb 24 11:00:12 2001 Return-Path: Received: from mercury.mv.net (mercury.mv.net [199.125.85.40]) by hub.freebsd.org (Postfix) with ESMTP id 2C37037B65D for ; Sat, 24 Feb 2001 11:00:09 -0800 (PST) (envelope-from pw@snoopy.mv.com) Received: from snoopy.mv.com (snoopy.mv.com [207.22.43.15]) by mercury.mv.net (8.8.8/mem-971025) with ESMTP id OAA27471 for ; Sat, 24 Feb 2001 14:00:01 -0500 (EST) Received: (from pw@localhost) by snoopy.mv.com (8.11.1/8.11.1) id f1OIxhY04858; Sat, 24 Feb 2001 13:59:43 -0500 (EST) (envelope-from pw) Message-Id: <200102241859.f1OIxhY04858@snoopy.mv.com> Date: Sat, 24 Feb 2001 13:59:43 -0500 (EST) From: Paul Werkowski Reply-To: pw@snoopy.mv.com To: FreeBSD-gnats-submit@freebsd.org Subject: Some interrupts not delivered on Dell Workstation 620. X-Send-Pr-Version: 3.2 >Number: 25346 >Category: kern >Synopsis: Some interrupts not delivered on Dell Workstation 620. >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: closed >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sat Feb 24 11:10:03 PST 2001 >Closed-Date: Tue Jan 8 08:24:31 PST 2002 >Last-Modified: Tue Jan 08 08:24:59 PST 2002 >Originator: Paul Werkowski >Release: FreeBSD 4.2-STABLE i386 >Organization: >Environment: Dell Precision Workstation 620. This box contains an integrated CS4614 Audio accelerator and NVidia GeForce2 GTS graphics accelerator. Both of these devices share the same IRQ line. A demsg output is now attached. ====================================================== Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-STABLE #46: Tue Feb 20 16:41:33 EST 2001 pw@snoopy.mv.com:/usr/src/sys/compile/MOBY Calibrating clock(s) ... TSC clock: 993300375 Hz, i8254 clock: 1193154 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (993.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383fbff real memory = 1073340416 (1048184K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x00457000 - 0x3ff95fff, 1068756992 bytes (260927 pages) avail memory = 1041166336 (1016764K bytes) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xc03e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 Other BIOS signatures found: ACPI: 000fd720 Preloaded elf kernel "kernel" at 0xc0431000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a218086) apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a218086) pcib0: on motherboard found-> vendor=0x8086, dev=0x1a21, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f0000000, size 26 found-> vendor=0x8086, dev=0x1a23, revid=0x02 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x1a24, revid=0x02 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=3 secondarybus=2 found-> vendor=0x8086, dev=0x2418, revid=0x02 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=4 secondarybus=4 found-> vendor=0x8086, dev=0x2410, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x2411, revid=0x02 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000ffa0, size 4 found-> vendor=0x8086, dev=0x2412, revid=0x02 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=14 map[20]: type 1, range 32, base 0000ff80, size 5 found-> vendor=0x8086, dev=0x2413, revid=0x02 class=0c-05-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=11 map[20]: type 1, range 32, base 0000dcd0, size 4 pci0: on pcib0 pcib1: at device 1.0 on pci0 found-> vendor=0x10de, dev=0x0150, revid=0xa4 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base fc000000, size 24 map[14]: type 1, range 32, base e8000000, size 27 pci1: on pcib1 pci1: (vendor=0x10de, dev=0x0150) at 0.0 irq 9 pcib2: at device 2.0 on pci0 found-> vendor=0x8086, dev=0x1360, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=3 secondarybus=3 pci2: on pcib2 pcib3: at device 31.0 on pci2 found-> vendor=0x8086, dev=0x1161, revid=0x01 class=08-00-20, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 pci3: on pcib3 pci3: (vendor=0x8086, dev=0x1161) at 0.0 pcib4: at device 30.0 on pci0 found-> vendor=0x1013, dev=0x6003, revid=0x01 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base f9fff000, size 12 map[14]: type 1, range 32, base f9e00000, size 20 found-> vendor=0x9005, dev=0x00cf, revid=0x01 class=01-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000ec00, size 8 map[14]: type 1, range 64, base f9ffe000, size 12 found-> vendor=0x9005, dev=0x00cf, revid=0x01 class=01-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=10 map[10]: type 1, range 32, base 0000e800, size 8 map[14]: type 1, range 64, base f9ffd000, size 12 pci4: on pcib4 csa0: mem 0xf9e00000-0xf9efffff,0xf9fff000-0xf9ffffff irq 9 at device 4.0 on pci4 pcm0: on csa0 pcm0: ac97 codec id 0x43525914 (Cirrus Logic CS4297A) pcm0: ac97 codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement pcm: setmap 3f569000, 1000; 0xc2375000 -> 3f569000 pcm: setmap 3f56a000, 1000; 0xc2376000 -> 3f56a000 ahc0: port 0xec00-0xecff mem 0xf9ffe000-0xf9ffefff irq 11 at device 5.0 on pci4 ahc0: Reading SEEPROM...done. ahc0: Manual LVD Termination ahc0: BIOS eeprom not present ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 420 instructions downloaded aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs ahc1: port 0xe800-0xe8ff mem 0xf9ffd000-0xf9ffdfff irq 10 at device 5.1 on pci4 ahc1: Reading SEEPROM...done. ahc1: Manual LVD Termination ahc1: BIOS eeprom not present ahc1: Primary Low Byte termination Enabled ahc1: Primary High Byte termination Enabled ahc1: Downloading Sequencer Program... 420 instructions downloaded aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xffa0-0xffaf at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=00 status0=ff status1=ff ata0: probe allocation failed ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8 ata1: mask=03 status0=50 status1=00 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI probe a=14 b=eb ata1-slave: ATAPI probe a=14 b=eb ata1: mask=03 status0=00 status1=00 ata1: devices=0c ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xff80-0xff9f irq 14 at device 31.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: (vendor=0x8086, dev=0x2413) at 31.3 irq 11 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000 ata2: mask=00 status0=ff status1=ff ata2: probe allocation failed ata2 failed to probe at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe at port 0x330 on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: on ppbus0 bpf: lp0 attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c040, tty 63129a, net 67129a bpf: sl0 attached ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: CD-RW drive at ata1 as master acd0: read 5512KB/s (5512KB/s) write 1377KB/s (1377KB/s), 4096KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: CD-R, CD-RW, test write acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ata1-slave: piomode=3 dmamode=0 udmamode=-1 dmaflag=1 ata1-slave: success setting PIO3 on generic chip Creating DISK afd0 afd0: rewriteable drive at ata1 as slave afd0: 239MB (489472 sectors), 239 cyls, 64 heads, 32 S/T, 512 B/S afd0: 4096KB/s, transfer limit 64 blks, PIO3 afd0: Medium: Unknown media (0x0) Waiting 2 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 (ahc0:A:0:0): Received PPR width 9, period 1, offset 7f,options 2 Filtered to width 1, period 9, offset 7f, options 2 ahc0: target 0 using 16bit transfers ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f (ahc0:A:2:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 (ahc0:A:2:0): Received PPR width 9, period 1, offset 7f,options 2 Filtered to width 1, period 9, offset 7f, options 2 ahc0: target 2 using 16bit transfers ahc0: target 2 synchronous at 80.0MHz DT, offset = 0x7f (ahc0:A:1:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 (ahc0:A:1:0): Received PPR width 9, period 1, offset 7f,options 2 Filtered to width 1, period 9, offset 7f, options 2 ahc0: target 1 using 16bit transfers ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x7f Creating DISK da0 Creating DISK da1 Creating DISK da2 pass0 at ahc0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-3 device pass0: Serial Number 161030212084 pass0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled pass1 at ahc0 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-4 device pass1: Serial Number 50024408 pass1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled pass2 at ahc0 bus 0 target 2 lun 0 pass2: Fixed Direct Access SCSI-3 device pass2: Serial Number 161033411107 pass2: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: Serial Number 161030212084 da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 17366MB (35566478 512 byte sectors: 255H 63S/T 2213C) da2 at ahc0 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-3 device da2: Serial Number 161033411107 da2: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled da2: 17366MB (35566478 512 byte sectors: 255H 63S/T 2213C) da1 at ahc0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-4 device da1: Serial Number 50024408 da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled da1: 17366MB (35566478 512 byte sectors: 255H 63S/T 2213C) Mounting root from ufs:/dev/da1s1a da1s1: type 0xa5, start 63, end = 35551844, size 35551782 : OK start_init: trying /sbin/init swapon: adding /dev/da1s1b as swap device Automatic boot in progress... /dev/da1s1a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da1s1a: clean, 12587 free (43 frags, 1568 blocks, 0.1% fragmentation) da2s1: type 0x6, start 63, end = 4192964, size 4192902 : OK da2s2: type 0x5, start 4192965, end = 8385929, size 4192965 : OK da2s3: type 0xa5, start 8385930, end = 35551844, size 27165915 : OK /dev/da1s1g: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da1s1g: clean, 13694821 free (6021 frags, 1711100 blocks, 0.0% fragmentation) /dev/da2s3e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da2s3e: clean, 10206077 free (21 frags, 1275757 blocks, 0.0% fragmentation) /dev/da1s1f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da1s1f: clean, 575481 free (3857 frags, 71453 blocks, 0.4% fragmentation) /dev/da1s1e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da1s1e: clean, 17455 free (143 frags, 2164 blocks, 0.7% fragmentation) da2s1: type 0x6, start 63, end = 4192964, size 4192902 : OK da2s2: type 0x5, start 4192965, end = 8385929, size 4192965 : OK da2s3: type 0xa5, start 8385930, end = 35551844, size 27165915 : OK Doing initial network setup: hostname . lo0: flags=8049 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 Starting ppp as "root" bpf: tun0 attached Warning: Del route failed: 0.0.0.0: Non-existent Additional routing options: tcp extensions=NO TCP keepalive=YES . routing daemons: . additional daemons: syslogd . Doing additional network setup: named portmap . Starting final network daemons: . setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout starting standard daemons: inetd cron printer sendmail sshd usbd . Initial rc.i386 initialization: apm . rc.i386 configuring syscons: blank_time moused . additional ABI support: . Local package initialization: upsmond . Additional TCP options: . Sat Feb 24 09:13:47 EST 2001 ======================================================== config file machine i386 cpu I386_CPU cpu I486_CPU cpu I586_CPU cpu I686_CPU ident MOBY maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor #options VISUAL_USERCONFIG #visual boot -c editor #options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device amd # AMD 53C974 (Teckram DC-390(T)) device isp # Qlogic family device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured device adv0 at isa? device adw device bt0 at isa? device aha0 at isa? device aic0 at isa? device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device dpt # DPT Smartcache - See LINT for options! #device mly # Mylex AcceleRAID/eXtremeRAID # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family #device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # For non-pnp sound cards with no bridge drivers only: #device pcm0 at isa? irq 10 drq 1 flags 0x0 device pcm # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device fxp # Intel EtherExpress PRO/100B (82557, 82558) device tx # SMC 9432TX (83c170 ``EPIC'') device vx # 3Com 3c590, 3c595 (``Vortex'') device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device pcn # AMD Am79C79x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex #device ep #device fe0 at isa? port 0x300 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. #device an # Xircom Ethernet #device xe # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet =================================================================== >Description: The FreeBSD audio driver recognizes the CS4614 as csa0 on irq 9. The driver works fine for audio playback and capture EXCEPT the the tail of a playback will contain a bit of "buzz" after the real data bits are output. This can be subdued by writing 4096 zero bytes at the end of the data. This "buzz" has been traced to the fact that the csa0 interrupt service routine is never called. Vmstat -i also shows no indication that anything talks to irq 9. The irq line can be changed via BIOS setup but always audio and graphics share the same line. In an attempt to debug this, I disabled the integrated audio chip and installed a Turtle Beach Santa Cruz PCI card. This card has a CS4630 chip which is compatible with the CS4614. The Dell motherboard has four 32-bit PCI slots and four 64-bit PCI slots. One of the 64-bit slots can take a 32-bit card. The graphics card is in the first 32bit slot. All other slots are empty. I found that by installing the sound card in either the last 32-bit slot or the shared slot, vmstat -i would show a "mux" device at the irq of the sound card and interrupts would be delivered to the sound driver. Not so if the sound card was installed in slots 2 or 3. In slot 4, the sound device shared an interrupt with one of the AHC SCSI devices. In slot 5 (the shared 32/64 bit slot), the sound device shared an irq with two other devices. I also have a Dell Precision Workstation 420 available which also has the same integrated audio chip. There is no problem with interrupt delivery on that system. The bus structure as reported by dmesg is also different. >How-To-Repeat: Dmesg shows the csa0 and pcm0 devices should be using irq9. Running "systat -vmstat 1" while playing or recording using the sound device shows no interrupt activity on irq 9 or what ever line is assigned in BIOS setup unless an non-integrated sound card is plugged into pci slots 4 or 5. >Fix: >Release-Note: >Audit-Trail: Responsible-Changed-From-To: gnats-admin->freebsd-bugs Responsible-Changed-By: phk Responsible-Changed-When: Wed Apr 4 00:38:57 PDT 2001 Responsible-Changed-Why: over to bugs http://www.freebsd.org/cgi/query-pr.cgi?pr=25336 Responsible-Changed-From-To: gnats-admin->freebsd-bugs Responsible-Changed-By: phk Responsible-Changed-When: Wed Apr 4 00:38:57 PDT 2001 Responsible-Changed-Why: over to bugs http://www.freebsd.org/cgi/query-pr.cgi?pr=25346 From: Jonathan Chen To: freebsd-gnats-submit@FreeBSD.org, pw@snoopy.mv.com Cc: Subject: Re: kern/25346: Some interrupts not delivered on Dell Workstation 620. Date: Sun, 2 Sep 2001 19:54:12 -0400 There were some problems with the csa driver enabling busmaster mode that was fixed a couple of months ago. This may have been the cause of your problem. Can you confirm if the problem still exists on a recent -STABLE? -Jon State-Changed-From-To: open->feedback State-Changed-By: iedowse State-Changed-When: Mon Nov 19 16:36:48 PST 2001 State-Changed-Why: Does this problem still occur with a more recent -STABLE? http://www.FreeBSD.org/cgi/query-pr.cgi?pr=25346 State-Changed-From-To: feedback->closed State-Changed-By: sheldonh State-Changed-When: Tue Jan 8 08:24:31 PST 2002 State-Changed-Why: The originator reports that the problem is fixed in 4.4-RELEASE. http://www.FreeBSD.org/cgi/query-pr.cgi?pr=25346 >Unformatted: