From avatar@brahms.mmlab.cse.yzu.edu.tw Sun May 28 21:24:36 2000 Return-Path: Received: from brahms.mmlab.cse.yzu.edu.tw (brahms.mmlab.cse.yzu.edu.tw [140.138.145.183]) by hub.freebsd.org (Postfix) with SMTP id 1A23237BB70 for ; Sun, 28 May 2000 21:24:28 -0700 (PDT) (envelope-from avatar@brahms.mmlab.cse.yzu.edu.tw) Received: (qmail 865 invoked by uid 1000); 29 May 2000 04:23:44 -0000 Message-Id: <20000529042344.864.qmail@brahms.mmlab.cse.yzu.edu.tw> Date: 29 May 2000 04:23:44 -0000 From: avatar@mmlab.cse.yzu.edu.tw Sender: avatar@brahms.mmlab.cse.yzu.edu.tw Reply-To: avatar@mmlab.cse.yzu.edu.tw To: FreeBSD-gnats-submit@freebsd.org Subject: No card in database for "PCMCIA CARD 56KFaxModem"("FM56C-NFS") X-Send-Pr-Version: 3.2 >Number: 18866 >Category: kern >Synopsis: No card in database for "PCMCIA CARD 56KFaxModem"("FM56C-NFS") >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-bugs >State: closed >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Sun May 28 21:30:01 PDT 2000 >Closed-Date: Mon Jul 10 01:31:21 PDT 2000 >Last-Modified: Mon Jul 10 01:32:05 PDT 2000 >Originator: Tai-hwa Liang >Release: FreeBSD 3.4-20000425-STABLE i386 >Organization: Multimedia Laboratory at Yuan Ze University >Environment: FreeBSD 3.4-20000425-STABLE FreeBSD 4.0-RELEASE >Description: No card in database for "PCMCIA CARD 56KFaxModem"("FM56C-NFS") >How-To-Repeat: Insert the Billionton 56K FAX modem into the PCMCIA slot, and the above message would be popped on the console. >Fix: Apply following information in pccard.conf: # Billionton 56Kbps Fax Modem card "PCMCIA CARD 56KFaxModem" "FM56C-NFS" config 0x22 "sio2" ? insert echo "Billionton 56K modem card inserted" remove echo "Billionton 56K modem card removed" * DO NOT use `config auto "sio2"` on 4.0-RELEASE, or sio2 would be identified as "sio2: 8250"; furthermore, a "cu -l /dev/cuaa2" with some AT commands would lockup the system completely. FYI(pccardc dumpcis): Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x15 (Version 1 info), length = 42 000: 05 01 50 43 4d 43 49 41 20 43 41 52 44 20 35 36 010: 4b 46 61 78 4d 6f 64 65 6d 00 46 4d 35 36 43 2d 020: 4e 46 53 00 35 2e 34 31 00 ff Version = 5.1, Manuf = [PCMCIA CARD 56KFaxModem],card vers = [FM56C-NFS] Addit. info = [5.41],[ÿ] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 4e 01 88 00 PCMCIA ID = 0x14e, OEM ID = 0x88 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 02 01 Serial port/modem - POST initialize Tuple #5, code = 0x1a (Configuration map), length = 5 000: 01 30 00 01 13 Reg len = 2, config register addr = 0x100, last config = 0x30 Registers: XX--X--- Tuple #6, code = 0x1b (Configuration entry), length = 19 000: e0 81 9d 5f 55 4d 5d 26 36 35 fc 14 aa 60 f8 03 010: 07 24 28 Config index = 0x20(default) Interface byte = 0x81 (I/O) wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Continuous supply current: 2 x 100mA Max current average over 1 second: 3 x 100mA Power down supply current: 3 x 10mA Wait scale Speed = 1.2 x 10 us Card decodes 20 address lines IRQ modes: IRQs: BERR 2 4 9 11 13 15 Max twin cards = 0 Misc attr: (Audio-BVD2) (Read-only) (Power down supported) (Ext byte = 0x3) Tuple #7, code = 0x1b (Configuration entry), length = 7 000: 21 08 aa 60 f8 02 07 Config index = 0x21 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2f8 block length = 0x8 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 22 08 aa 60 e8 03 07 Config index = 0x22 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3e8 block length = 0x8 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 23 08 aa 60 e8 02 07 Config index = 0x23 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2e8 block length = 0x8 Tuple #10, code = 0x1b (Configuration entry), length = 6 000: 24 18 23 30 b8 1c Config index = 0x24 Card decodes 3 address lines, 8 Bit I/O only IRQ modes: Level IRQ level = 3 Tuple #11, code = 0x1b (Configuration entry), length = 3 000: 30 08 23 Config index = 0x30 Card decodes 3 address lines, 8 Bit I/O only Tuple #12, code = 0xff (Terminator), length = 0 >Release-Note: >Audit-Trail: State-Changed-From-To: open->closed State-Changed-By: sanpei State-Changed-When: Mon Jul 10 01:31:21 PDT 2000 State-Changed-Why: Committed in rev 1.117 http://www.freebsd.org/cgi/query-pr.cgi?pr=18866 >Unformatted: