Final Release of Patch V86P-7

Applicable to V86P-1 Code Build Stream and V86P-4 Card image.
Pre-requisite patches  V86P-2, -3 -4 -5 and -6  must be installed prior
to this patch.

*************** IBM COMPUTER CORPORATION – DISCLAIMER **************
* In accordance to IBM's commitment to maintain the highest level  *
* of customer satisfaction, this patch is being provided to customers *
* who have purchased the referenced IBM StorWatch MSS Specialist product that is      *
* currently covered by one of IBM's  extensive warranty plans and  *
* is also provided to those customers not yet underIBM's extended  *
* warranty plan as a courtesy.  The availability of this patch is in  *
* no way an obligation by IBM to continue this practice in the     *
* future.                                                             *
***********************************************************************

****************************** WARNING ********************************
*                                                                     *
* - Please be sure to cut and paste EXACTLY as indicated.  Any        *
*   addition or subtraction of pertinent patch data will mean the     *
*   patch will not load due to a checksum failure and the controller  *
*   will remain at it's original version.                             *
*                                                                     *
* - As always, any critical data should be backed up prior to         * 
*   performing any updates.                                           *
***********************************************************************

				PATCH V86P-7

Patch Title:    No Save Config 
ACS Version:    MSS RAID Controller V86
Patch Number:   7
Date:           8-March-2002

I.     Patch Description:

   Problem Symptoms:  
     1. The Save_configuration option must be turned off.
     2. Patch 86-3 causes crash on partition JBOD w/Save_config 
      
   Resolution: 
     1. Disabling the writing of Save_configuration at this time. 
        Subsequent patch will re-install the option.
     2. Not resetting (save_cfg bit on device).
 

Title:	No saveconfig 

Version:	V86P
Length: 	33
Patch Type:	0
Patch Number:	7

 Count:  	1
 Address:	C00A82C8
 Value[  0]:	8C800000

 Count:  	1
 Address:	C0FFF3C0
 Value[  0]:	5CA01614

 Count:  	0

Verification:	D600BC72




II.    Patch Installation Script for use with a host to CLI Utility 


Extract the following script to file PATCH_V86P-7.script. 
Submit script to CCL via Command Scripter utility.

----- Begin Script -----
!
!No saveconfig
!
run clcp
2
1
y
V86P
33
0
7
1
C00A82C8
8C800000
1
C0FFF3C0
5CA01614
0
D600BC72
3
0
----- End Script -----




III.   Patch file for use with IBM StorWatch MSS Specialist Client's Update Software feature. 

Extract the following to filename PATCH_V86P-7_INSTALL.WB_DATA and 
transfer to the Client host.  Specify it in the 'File to load' box 
from the IBM StorWatch MSS Specialist Update Controller Software screen as selected via the 
'Storage' menu option.


----- Begin IBM StorWatch MSS Specialist Script -----
! No saveconfig install (c) IBM 6-Mar-2002 !
1
V86P
33
0
7
1
C00A82C8
8C800000
1
C0FFF3C0
5CA01614
0
D600BC72
----- End IBM StorWatch MSS Specialist Script -----


IV.   Patch Deletion Script for use with IBM StorWatch MSS Specialist Client'S Update feature. 

Extract the following to filename to PATCH_V86P-7_DELETE.WB_DATA and 
transfer to the Client host.  Specify it in the 'File to load' box from
the IBM StorWatch MSS Specialist Update Controller Software screen as selected via the
'Storage' menu option.

----- Begin Script -----
! nO SAVECONFIG-delete (c) IBM 6-Mar-2002 !
2
V86P
7
----- End Script -----