====================================================================== Microsoft(R) Product Support Services Application Note (Text File) WA0835: MICROSOFT MAIL REMOTE FOR WINDOWS(TM) MSRMTTR.DLL VERSION 3.2.0.4006 UPDATE ====================================================================== Revision Date: 3/94 1 Disk Included The following information applies to Microsoft Mail Remote for Windows version 3.2. ----------------------------------------------------------------------- | INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY | | ACCOMPANY THIS DOCUMENT (collectively referred to as an Application | | Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER | | EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED | | WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR | | PURPOSE. The user assumes the entire risk as to the accuracy and | | the use of this Application Note. This Application Note may be | | copied and distributed subject to the following conditions: 1) All | | text must be copied without modification and all pages must be | | included; 2) If software is included, all files on the disk(s) | | must be copied without modification (the MS-DOS(R) utility | | diskcopy is appropriate for this purpose); 3) All components of | | this Application Note must be distributed together; and 4) This | | Application Note may not be distributed for profit. | | | | Copyright (C) 1994 Microsoft Corporation. All Rights Reserved. | | Microsoft and MS-DOS are registered trademarks and Windows is a | | trademark of Microsoft Corporation. | |---------------------------------------------------------------------| Introduction ------------ The disk provided with this Application Note contains MSRMTTR.DLL, a replacement for the MSRMTTR.DLL file that is included with version 3.2 of Microsoft Mail Remote for Windows. This replacement file provides additional enhancements to the original MSRMTTR.DLL file, correcting the following problem: - The algorithm used to compare strings received by the script command WAITRSP did not correctly identify valid strings. To replace your MSRMTTR.DLL file -------------------------------- 1. Verify that the Microsoft Mail Remote driver (MSRMT.DLL) is the current driver in the Mail System Selector (MAILDRV.EXE) by running the Mail System Selector from the Windows Program Manager, choosing Microsoft Mail Remote, and then selecting Set As Current Mail Driver. 2. Insert the enclosed WA0835 disk in your floppy disk drive. 3. At the MS-DOS command prompt, type the following and press ENTER copy :\msrmttr.dll where is the floppy disk drive containing the WA0835 disk and is the drive and directory where your MSRMTTR.DLL file currently resides. For example, if MSRMTTR.DLL is located in the Windows SYSTEM directory on drive C and the WA0835 disk is in drive A, type the following command: copy a:\msrmttr.dll c:\windows\system A message will be displayed stating: 1 file(s) copied. This indicates that your MSRMTTR.DLL file has been successfully replaced.