FLDIGI(1)

NAME
fldigi - digital modem program for hamradio operators

SYNOPSIS

fldigi [OPTIONS]

DESCRIPTION

Fldigi is a cross-platform multi-modem program for most of the digital modes used by radio amateurs today: CW, PSK, MFSK, MT-63, RTTY, Hellschreiber, DominoEX, Olivia, THOR and Throb are all supported. It can also help calibrate a sound card to a time signal and do on-air frequency measurement tests. Fldigi features basic rig control, logging, and contest operation, “panoramic” PSK decoding, a PSK Reporter client, and remote control via XML-RPC.

OPTIONS

Long options begin with two hyphens and are handled by fldigi. The option names may be abbreviated to any unambiguous substring, and the option argument may be separated from the name by a space or equals sign, as per getopt(3).

Short options begin with a single hyphen and are passed directly to FLTK. They may be abbreviated only as indicated.

--config-dir DIRECTORY
    Look for and store configuration files in directory DIRECTORY, which is created if it does not exist. Defaults to “$HOME/.fldigi”.

--rx-ipc-key KEY
    Set the receive message queue key. May be given in hex if prefixed with “0x”. Defaults to “9876” or “0x2694”.

--tx-ipc-key KEY
    Set the transmit message queue key. May be given in hex if prefixed with “0x”. Defaults to “6789” or “0x1a85”.

--arq-server-address HOSTNAME
    Set the ARQ TCP server address. Defaults to “127.0.0.1”. HOSTNAME may be any node name string accepted by getaddrinfo(3).

--arq-server-port PORT
    Set the ARQ TCP server port. Defaults to “7322”. PORT may be any service name string accepted by getaddrinfo(3).

    Note

    The --xmlrpc-* options are only available if fldigi was built with XML-RPC support.

--xmlrpc-server-address HOSTNAME
    Set the XML-RPC server address. Defaults to “127.0.0.1”.

--xmlrpc-server-port PORT
    Set the XML-RPC server port. Defaults to “7362”.

--xmlrpc-allow REGEX
    Allow only the methods whose names match REGEX. REGEX is a POSIX extended regular expression.

--xmlrpc-deny REGEX
    Allow only the methods whose names do not match REGEX.

--xmlrpc-list
    List all available XML-RPC methods and exit. May be preceded by the --xmlrpc-allow or --xmlrpc-deny options to verify their effect.

--cpu-speed-test
    Perform the CPU speed test that is normally done when fldigi is run without an existing configuration directory. Results are shown in the event log and options may be changed to the recommended values for the measured CPU speed.

--noise
    Unhide controls for adding noise to the transmitted signal.

--wfall-only
    Hide all main window widgets except the menu bar and waterfall (with its associated controls). Meant to be used with external programs that control fldigi with XML-RPC.

--debug-level LEVEL
    Set the event log verbosity. LEVEL is clamped to the range [0,5]; for Quiet, Error, Warning, Info, Verbose and Debug. Defaults to “3” (Info).

--version
    Print version information and exit.

--build-info
    Print build information and exit.

--help
    Print options summary and exit.

  Standard FLTK options

-bg, -background COLOUR
    Set the background colour.

-bg2, -background2 COLOUR
    Set the secondary (text) background colour.

-di, -display DISPLAY
    Specifies the X server to connect to; see X(7).

-dn, -dnd or -nodn, -nodnd
    Enable or disable drag and drop copy and paste in text fields.

-fg, -foreground COLOUR
    Set the foreground colour.

-g, -geometry GEOMETRY
    Set the initial window size and position. Fldigi may not honour this option.

-i, -iconic
    Start fldigi in iconified state. Fldigi may not honour this option.

-k, -kbd or -nok, -nokbd
    Enable or disable visible keyboard focus in non-text widgets.

-na, -name CLASSNAME
    Set the window class. Defaults to “Fldigi”.

-ti, -title WINDOWTITLE
    Set the window title. Defaults to “fldigi - <callsign>”.

  Additional UI options

--font FONT[:SIZE]
    Set the widget font and (optionally) size. Defaults to “sans:12”.

  Options useful to developers

    Note

    The --benchmark-* options are only enabled if fldigi was built (exclusively) for benchmarking and batch decoding.

--benchmark-modem ID
    Specify the modem. Defaults to “25” (“BPSK31”).

--benchmark-frequency FREQ
    Set the modem frequency in Hz. Defaults to “1000”.

--benchmark-afc BOOLEAN
    Enable or disable modem AFC. Defaults to “false”.

--benchmark-squelch BOOLEAN
    Enable or disable modem squelch. Defaults to “false”.

--benchmark-squelch-level LEVEL
    Set the modem squelch level (1—100%). Defaults to “0.0”.

--benchmark-input INPUT
    Specify the input. Must be a positive integer indicating the number of samples of silence to generate as the input, or, if fldigi was linked with libsndfile, the name of the input audio file. The filename must contain non-digit characters.

--benchmark-output FILE
    Specify the output data file. Non-textual output (i.e. Hellschreiber or MFSK images) cannot be saved. Default: decoder output is discarded.

--benchmark-src-ratio RATIO
    Specify the sample rate conversion ratio. Defaults to “1.0” (input is not resampled).

--benchmark-src-type TYPE
    Set the sample rate conversion type. TYPE is an integer in the range [0,4]. Defaults to “2” (“Fastest SINC Interpolator”).

    Warning

    The following options should not be relied upon. They are listed here only for the sake of completeness, and may be replaced by GUI settings or removed altogether in a future version.

--wfall-width WIDTH
    Set the waterfall width.

--wfall-height HEIGHT
    Set the waterfall height.

--window-width WIDTH
    Set the minimum window width.

--window-height HEIGHT
    Set the minimum window height.

--exit-after SECONDS
    Run for approximately SECONDS seconds.

--frames-per-buffer FRAMES
    Set frames per buffer option to FRAMES when creating PortAudio streams. Defaults to “0” (let PortAudio choose).

ENVIRONMENT

Fldigi uses several environment variables, mainly set for child processes created by the <EXEC> macro and the notifier.

  General variables

FLDIGI_BROWSER
    The web browser to use for http and file URIs. Overrides $BROWSER and xdg-open(1).

  Macro variables

The following variables are created in the environment of the child process that is forked by the <EXEC> macro. They are empty if values are not available.

FLDIGI_RX_IPC_KEY
    The receive message queue key.

FLDIGI_TX_IPC_KEY
    The transmit message queue key.

FLDIGI_XMLRPC_ADDRESS
    The XML-RPC server address string.

FLDIGI_XMLRPC_PORT
    The XML-RPC server port string.

FLDIGI_ARQ_ADDRESS
    The ARQ server address string.

FLDIGI_ARQ_PORT
    The ARQ server port string.

FLDIGI_VERSION
    The version string.

FLDIGI_PID
    The process ID of the parent fldigi process.

FLDIGI_CONFIG_DIR
    The configuration directory.

FLDIGI_MY_CALL
    The operator’s callsign.

FLDIGI_MY_NAME
    The operator’s name.

FLDIGI_MY_LOCATOR
    The operator’s IARU (Maidenhead) locator.

FLDIGI_MODEM
    The short modem name.

FLDIGI_MODEM_LONG_NAME
    The long modem name.

FLDIGI_DIAL_FREQUENCY
    The rig (radio) frequency.

FLDIGI_AUDIO_FREQUENCY
    The modem (audio) centre frequency.

FLDIGI_FREQUENCY
    The actual receive/transmit frequency, i.e. the sum of rig and modem frequencies taking into account the rig sideband.

FLDIGI_LOG_FREQUENCY
    The text (frequency in MHz) contained in the QSO Freq log field.

FLDIGI_LOG_TIME_ON
    The text (QSO start time) contained in the (time) On log field.

FLDIGI_LOG_TIME_OFF
    The text (QSO end time) contained in the (time) Off log field.

FLDIGI_LOG_CALL
    The text (other station’s callsign) contained in the Call log field.

FLDIGI_LOG_NAME
    The text (other station’s name) contained in the Name log field.

FLDIGI_LOG_RST_IN
    The text (received RST) contained in the (RST) In log field.

FLDIGI_LOG_RST_OUT
    The text (sent RST) contained in the (RST) Out log field.

FLDIGI_LOG_QTH
    The text (other station’s QTH) contained in the QTH log field.

FLDIGI_LOG_LOCATOR
    The text (other station’s Maidenhead locator) contained in the Loc log field.

FLDIGI_LOG_NOTES
    The text (free-form notes) contained in the Notes log field.

FLDIGI_AZ
    The text (azimuth in degrees to other station) contained in the Az log field.

  Notifier variables

The following variables are created in the environment of child processes created by the notifier.

FLDIGI_NOTIFY_STRi
    These variables (i in [0,9]) contain substrings matched by capturing groups in the event’s regular expression. 0 contains the whole matched text.

FLDIGI_NOTIFY_STR_NUM
    The number of substrings available.

FLDIGI_NOTIFY_CALLSIGN
    Builtin event types that match callsigns will place the callsign in this variable.

FLDIGI_NOTIFY_TEXT
    The complete string that matched the event’s regular expression.

FLDIGI_NOTIFY_AUDIO_FREQUENCY
    The modem frequency.

FLDIGI_NOTIFY_EVENT
    The event type.

FLDIGI_NOTIFY_COUNTRY
    The station’s country name (for events of type "station heard twice").

  Debugging variables

The following variables are only used if fldigi was built with debugging support (--enable-debug), or they are only useful when debugging specific modules.

FLDIGI_NO_EXEC
    If set, this variable disables glibc’s malloc debugging, which fldigi enables by default when built for debugging.

FLDIGI_TRACE_LOCKS
    Traces Fl::lock() calls.

FLDIGI_HAMLIB_DEBUG
    Initialises hamlib in debug mode.

RESTRICTIONS

Fldigi is licensed under the GNU GPL, which grants you the right to run the program for any purpose (freedom 0). However, permission to use it for the transmission of radio signals can only be obtained from the communications authority of your country. When given, this permission almost always comes in the form of an amateur radio license.

If you do not have an amateur radio license you can still have fun using fldigi as a shortwave listener. One way to do so is by using the builtin PSK Reporter client to submit realtime spots of transmitting stations; see RESOURCES below. All you need is a computer, homebrew SDR receiver, and simple wire antenna!

FILES

Various files and subdirectories are created in $HOME/.fldigi. Some of the most interesting ones are listed below.

fldigi_def.xml
    The main settings file.

fldigi.prefs
    The “status” file. Stores window geometries, button states, current modem, current audio frequency, squelch level, and so on.

status_log.txt
    The event log.

macros/macros.mdf
    The default macro file.

palettes/
    This directory contains waterfall palettes.

scripts/
    This directory is added to the PATH environment variable of the child process that runs <EXEC> macros.

logs/
    This directory contains logged received and sent text (when such logging is enabled), including the default logbook database, logbook.adif.

images/
    Received MFSK images are automatically saved in this directory.

freqanalysis.csv
    This file is written by the frequency analysis modem. The fields are dial frequency, audio frequency, and offset. See documentation for details.

    Note

    The following files are used if present. They must be downloaded and copied to ~/.fldigi/ by the user.

cty.dat
    List of DXCC entities and callsign prefixes; used to display tooltips in the received text buffer, and also to auto-fill the Country, Locator and Azimuth log fields. Available at http://www.country-files.com/cty/.

lotw1.txt
    List of known LOTW users (one callsign per line); used for the received text tooltips. Available at http://www.hb9bza.net/lotw/.

AGMemberList.txt or eqsl.txt
    List of “Authenticity Guaranteed” eQSL users (one callsign per line); used for the received text tooltips. Available at http://www.eqsl.cc/QSLcard/Programming.cfm.

EXAMPLES

fldigi --wfall-height 144 --font sans:11 -fg "#c0c0c0" -bg "#5f5f63" -bg2 "#19213b"
    This is how the author of this document invokes fldigi.

fldigi --xmlrpc-deny "main.(tx|tune|run_macro)"
    Unregister XML-RPC methods that may transmit.

ssh -L 7362:localhost:7362 remote-host xvfb-run fldigi -display :99
    Start fldigi on remote-host under a “fake” X server. (The xvfb-run(1) utility is available on Debian systems). The remote “headless” fldigi is then controlled via XML-RPC on port 7362, e.g. using fldigi-shell(1).

fldigi --benchmark-input 480000 --benchmark-modem 1
    Benchmark the DominoEX-4 modem with 480K audio samples.

fldigi --benchmark-input audio.wav --benchmark-modem 25 --benchmark-frequency 1500 --benchmark-afc 1 --benchmark-squelch 1 --benchmark-squelch-level 5.0 --benchmark-output out.txt
    Read audio.wav (whose sample rate must be 8000Hz in this case) and decode BPSK-31 signals at 1500Hz. AFC is enabled and the squelch is set to 5%. Decoded text is saved to out.txt.

BUGS

Yes.

SEE ALSO

fldigi-shell(1), gmfsk(1), gpsk31(1), grig(1), rigctl(1), xlog(1), getaddrinfo(3), getopt(3), regex(7), X(7)

RESOURCES

Main web site: http://www.w1hkj.com/Fldigi.html

BerliOS project page: http://developer.berlios.de/projects/fldigi/

Wiki and bug tracker: https://fedorahosted.org/fldigi/

More information on MFSK16, DominoEX and other digital modes can be found at http://www.qsl.net/zl1bpu/ and http://www.w1hkj.com/FldigiHelp/Modes/index.htm

The PSK Automatic Propagation Reporter site can be found at http://www.pskreporter.info/

AUTHORS

Fldigi was written by

    • David Freese, W1HKJ.

    • Stelios Bounanos, M0GLD.

    • Leigh L. Klotz, Jr., WA5ZNU.

Fldigi also includes code written by others. Among them are

    • Tomi Manninen, OH2BNS.

    • Pawel Jalocha, SP9VRC.

    • Hamish Moffatt, VK3SB.

This manual page was written by Stelios Bounanos <sb[at]enotty(dot)net>.

COPYING

License GPLv3+: GNU GPL version 3 or later.