foo2zjs-wrapper(1)

NAME
foo2zjs-wrapper - Convert Postscript into a ZJS printer stream

SYNOPSIS
foo2zjs-wrapper [options] [ps-file]

DESCRIPTION
foo2zjs-wrapper is a Foomatic compatible printer wrapper for the foo2zjs printer driver. This script reads a Postscript ps-file or standard input and converts it to Zenographics ZjStream printer format for driving the Minolta/QMS 2300 DL network color laser printer and other Zenographics-based printers.

This script can be used in a standalone fashion, but is intended to be called from a printer spooler system which uses the Foomatic printer database.

COMMAND LINE OPTIONS

  Normal Options
These are the options used to select the parameters of a print job that are usually controlled on a per job basis.

-c  Print in color (else monochrome).

-C colormode
    Color correction mode [0].
    1 | Photos (using m2300w CRDs)
    2 | Photos and text (using m2300w CRDs)
    3 | Graphics and text (using m2300w CRDs)
    10 | ICM color profile (using -G *.icm file)

-d duplex
    Duplex code to send to printer [1].
    1 | off | 2 | long edge | 3 | short edge

-m media
    Media code to send to printer [1].
    Media | 2300DL | 2200DL | HP 1018 | HP P1102 | HP
     | HP 1005 |  | HP 1020 | HP P1606 | CP1025
     | -z0 | -z0 | -z1 | -z2 | -z3
    standard | 1 | 1 | 1 | 1 | 1
    transparency | 2 | 2 | 2 | 2 | 2
    envelope | 257 | na | 267 | 267 | 267
    letterhead | 259 | na | 513 | 513 | 513
    bond | na | na | 260 | 260 | 260
    thick | 261 | 4 | 261 | na | na
    postcard | 262 | na | na | na | na
    rough | na | na | 263 | 263 | 263
    heavy | na | na | 262 | 262 | 262
    labels | 263 | 3 | 263 | 265 | 265
    vellum | na | na | 273 | 273 | 273
    medium | na | na | na | 282 | 282
    extraheavy | na | na | na | 283 | 283
    color | na | na | 512 | 512 | 512
    light | na | na | 258 | 258 | 258
    preprinted | na | na | 514 | 514 | 514
    prepunched | na | na | 515 | 515 | 515
    recycled | na | na | 516 | 516 | 516

-p paper
    Paper size code to send to printer [1].
    Paper | MC 2300DL | HP 1018 | HP P1102 | HP
     | HP 1005 | HP 1020 | HP P1606 | CP1025
     | -z0 | -z1 | -z2 | -z3
    letter | 1 | 1 | 1 | 1
    legal | 5 | 5 | 5 | 5
    executive | 7 | 7 | 7 | 7
    A4 | 9 | 9 | 9 | 9
    A5 | 11 | 11 | 11 | 11
    B5jis | 13 | 13 | 13 | 13
    env #10 | 20 | 20 | 20 | 20
    env DL | 27 | 27 | 27 | 27
    env CL | 28 | 28 | 28 | 28
    env B5 | 34 | 34 | 34 | 34
    env Monarch | 37 | 37 | 37 | 37
    postcard (japan) | na | 260 | 43 | 43
    B5iso | na | 259 | na | na
    A6 | na | 262 | 70 | 70
    double postcard rotated | na | 261 | 82 | 82
    16k 197x273 | na | 257 | 257 | 257
    fanfold german legal | na | 258 | 258 | 258
    16k 184x260 | na | na | 263 | 263
    16k 195x270 | na | na | 264 | 264
    photo 4x6 | na | na | na | 268
    photo 5x8 | na | na | na | 269
    photo 10x15 | na | na | na | 270

-n copies
    Number of copies [1].

-r xresxyres
    Set device resolution in pixels/inch [1200x600].

-s source
    Source (Input Slot) code to send to printer [7].
    1 | upper | 4 | manual
    2 | lower | 7 | auto

-t  Draft mode. Every other pixel is white.

-T density
    Print density (1-5). The default is 3 (medium).

-2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
    Print in N-up. Requires the psutils package.

-o orient
    Orientation used for N-up.
    Portrait | -op | (normal)
    Landscape | -ol | (rotated 90 degrees anticlockwise)
    Seascape | -os | (rotated 90 degrees clockwise)

  Printer Tweaking Options
These are the options used to customize the operation of foo2zjs for a particular printer.

-u xoffxyoff
    Set the offset of the start of the printable region from the upper left corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.

-l xoffxyoff
    Set the offset of the end of the printable region from the lower right corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.

-L mask
    Send the logical clipping values from -u/-l in the ZjStream. foo2zjs-wrapper always runs Ghostscript with the ideal page dimensions, so that the scale of the image is correct, regardless whether or not the printer has unprintable regions. This option is used to move the position of the clipped image back to where it belongs on the page. The default is to send the amount which was clipped by -u and -l, and should be good in most cases.
    0 | don't send any logical clipping amounts
    1 | only send Y clipping amount
    2 | only send X clipping amount
    3 | send both X and Y clipping amounts

-P  Do not send START_PLANE codes on monochrome output. May be needed by some monochrome-only printers, such as the HP LaserJet 1000.

-X padlen
    Add extra zero padding to the end of BID segments. The default is 16 bytes. Padding 16 bytes of zeroes is needed for older ZjStream printers, such as the Minolta 2200DL and HP LaserJet 1000, and seems harmless to newer ones, such as the Minolta 2300DL. So the default should be good for all cases.

-z model
    Model. Default is 0.
    0 | KM 2300DL / HP 1000 / HP 1005
    1 | HP 1018 / HP 1020 / HP 1022
    2 | HP Pro P1102 / P1566 / P1606dn
    3 | HP Pro CP1025

  Color Tweaking Options
These are the options used to control the quality of color output. Color correction is currently a WORK IN PROGRESS.

-g gsopts
    Additional options to pass to Ghostscript, such as -g“-dDITHERPPI=nnn”, etc. This option may appear more than once.

-G profile.icm
    Convert profile.icm to a Postscript color rendering dictionary (CRD) using foo2zjs-icc2ps and adjust the printer colors by using the Postscript setcolorrendering operator. (WORK IN PROGRESS).

-G gamma-file.ps
    Prepend gamma-file.ps to the Postscript input to perform color correction using the setcolortransfer Postscript operator. For example, the file might contain:
    {0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer

-I intent
    Select profile intent from the ICM file. 0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute. Default is 0 (perceptual).

  Debugging Options
These options are used for debugging foo2zjs and its wrapper.

-S plane
    Output just a single color plane from a color print and print it on the black plane. The default is to output all color planes.
    1 | Cyan
    2 | Magenta
    3 | Yellow
    4 | Black

-D level
    Set Debug level [0].

EXAMPLES
Create a monochrome ZjStream from a Postscript document, examine it, and then print it using a RAW print queue:
    foo2zjs-wrapper testpage.ps > testpage.zm
    zjsdecode < testpage.zm
    lpr -P raw testpage.zm

Create a color ZjStream stream from a Postscript document:
    foo2zjs-wrapper -c testpage.ps > testpage.zc

FILES
/usr/bin/foo2zjs-wrapper

SEE ALSO
foo2zjs(1), zjsdecode(1)

AUTHOR
Rick Richardson <rick.richardson@comcast.net>
http://foo2zjs.rkkda.com/