From <@DBSTU1.RZ.TU-BS.DE:y0001415@ws.rz.tu-bs.de> Fri Jan 12 18:09:52 1996 Received: from DBSTU1.RZ.TU-BS.DE (dbstu1.rz.tu-bs.de [134.169.1.1]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id SAA21974 for ; Fri, 12 Jan 1996 18:09:45 -0800 (PST) Received: from malibu.ts.rz.tu-bs.de by DBSTU1.RZ.TU-BS.DE (IBM VM SMTP V2R2) with TCP; Sat, 13 Jan 96 03:10:09 MEZ Received: (from y0001415@localhost) by malibu.ts.rz.tu-bs.de (8.6.12/8.6.9) id CAA05375; Sat, 13 Jan 1996 02:27:01 +0100 Message-Id: <199601130127.CAA05375@malibu.ts.rz.tu-bs.de> Date: Sat, 13 Jan 1996 02:27:01 +0100 From: y0001415@ws.rz.tu-bs.de Reply-To: y0001415@ws.rz.tu-bs.de To: FreeBSD-gnats-submit@freebsd.org Subject: X11 mono server dumps core on supported video hardware X-Send-Pr-Version: 3.2 >Number: 942 >Category: misc >Synopsis: X11 mono server dumps core on supported video hardware >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: closed >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Jan 12 18:10:01 PST 1996 >Closed-Date: Tue Oct 22 14:08:01 PDT 1996 >Last-Modified: Tue Oct 22 14:08:19 PDT 1996 >Originator: Martin Butkus >Release: FreeBSD 2.1-STABLE i386 >Organization: TU Braunschweig, Germany >Environment: Intel 486 ISA bus system 16 MB RAM Sigma Designs LaserView monitor (b&w) Sigma Designs LaserView graphics card (was shipped with the monitor) Adaptec 1542B SCSI controller 730S Quantum SCSI hard disk 270S Syquest removable hard disk (SCSI) 3-button No-name mouse (MouseSystems protocol) on sio0 Hayes modem on sio2 HP Deskjet 520 on lpt0 no-name multiport card sio0 & sio1: 16450 sio2: 16550A >Description: I've installed FreeBSD 2.1.0R over 2.0.5R and had newfs'ed /usr and /var before. Especially /usr/X11R6 didn't exist. After installation of 2.1.0R and XFree 3.1.2 (complete install except that I installed just the XF86_Mono server), I symlinked X to XF86_Mono and I then installed my old XF86Config in /etc. This XF86Config had been running flawlessly with the XF86_Mono distributed with 2.0.5R. Nothing in my hardware configuration had changed. Result was that only a small rectangle in the bottom left corner of the screen was filled with the usual background pattern. A second after that XF86Config exited on signal 11 and dumped core. I've then tried all legal values of the "MemBase" option that could be specified for my card with the same result. I've also built a custom kernel with "options XSERVER" specified (still using the sc console) - no success. As the README's of XFree (still) state that XFree works with my monitor + card I consider this a bug. >How-To-Repeat: Install this /etc/XF86Config and then do a "startx": --- cut here --- # File generated by xf86config. # # Copyright (c) 1994 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. DontZoom EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" AutoRepeat 500 5 # Let the server do the NumLock processing. This should only be required # when using pre-R6 clients ServerNumLock # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: LeftAlt Meta RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" Protocol "MouseSystems" Device "/dev/ttyd0" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Buttons # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "LView" VendorName "Sigma Designs" ModelName "LView" # Bandwidth is in MHz unless units are specified # Bandwidth 25.2 # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 75 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 60 # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # These two are equivalent # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace # Mode "1024x768i" # DotClock 45 # HTimings 1024 1048 1208 1264 # VTimings 768 776 784 817 # Flags "Interlace" # EndMode # This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there's no immediate need to # delete mode timings (unless particular mode timings don't work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: # Sample Device for accelerated server: # Section "Device" # Identifier "Actix GE32+ 2MB" # VendorName "Actix" # BoardName "GE32+" # Ramdac "ATT20C490" # Dacspeed 110 # Option "dac_8_bit" # Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0 # Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0 # EndSection # Device configured by xf86config: Section "Device" Identifier "LView" VendorName "Sigma Designs" BoardName "LView" Chipset "sigmalview" VideoRam 512 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The Mono server Section "Screen" Driver "mono" Device "LView" Monitor "LView" Subsection "Display" EndSubsection EndSection # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64) --- cut here --- >Fix: I've replaced the buggy XF86_Mono with the old one (as shipped with 2.0.5R) and it worked. >Release-Note: >Audit-Trail: From: y0001415@ws.rz.tu-bs.de To: FreeBSD-gnats-submit@freebsd.org Cc: Subject: misc/942: X11 mono server dumps core on supported video hardware Date: Sat, 13 Jan 1996 02:27:01 +0100 >Number: 942 >Category: misc >Synopsis: X11 mono server dumps core on supported video hardware >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Jan 12 18:10:01 PST 1996 >Last-Modified: >Originator: Martin Butkus >Organization: TU Braunschweig, Germany >Release: FreeBSD 2.1-STABLE i386 >Environment: Intel 486 ISA bus system 16 MB RAM Sigma Designs LaserView monitor (b&w) Sigma Designs LaserView graphics card (was shipped with the monitor) Adaptec 1542B SCSI controller 730S Quantum SCSI hard disk 270S Syquest removable hard disk (SCSI) 3-button No-name mouse (MouseSystems protocol) on sio0 Hayes modem on sio2 HP Deskjet 520 on lpt0 no-name multiport card sio0 & sio1: 16450 sio2: 16550A >Description: I've installed FreeBSD 2.1.0R over 2.0.5R and had newfs'ed /usr and /var before. Especially /usr/X11R6 didn't exist. After installation of 2.1.0R and XFree 3.1.2 (complete install except that I installed just the XF86_Mono server), I symlinked X to XF86_Mono and I then installed my old XF86Config in /etc. This XF86Config had been running flawlessly with the XF86_Mono distributed with 2.0.5R. Nothing in my hardware configuration had changed. Result was that only a small rectangle in the bottom left corner of the screen was filled with the usual background pattern. A second after that XF86Config exited on signal 11 and dumped core. I've then tried all legal values of the "MemBase" option that could be specified for my card with the same result. I've also built a custom kernel with "options XSERVER" specified (still using the sc console) - no success. As the README's of XFree (still) state that XFree works with my monitor + card I consider this a bug. >How-To-Repeat: Install this /etc/XF86Config and then do a "startx": --- cut here --- # File generated by xf86config. # # Copyright (c) 1994 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. DontZoom EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" AutoRepeat 500 5 # Let the server do the NumLock processing. This should only be required # when using pre-R6 clients ServerNumLock # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: LeftAlt Meta RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" Protocol "MouseSystems" Device "/dev/ttyd0" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Buttons # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "LView" VendorName "Sigma Designs" ModelName "LView" # Bandwidth is in MHz unless units are specified # Bandwidth 25.2 # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 75 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 60 # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # These two are equivalent # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace # Mode "1024x768i" # DotClock 45 # HTimings 1024 1048 1208 1264 # VTimings 768 776 784 817 # Flags "Interlace" # EndMode # This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there's no immediate need to # delete mode timings (unless particular mode timings don't work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: # Sample Device for accelerated server: # Section "Device" # Identifier "Actix GE32+ 2MB" # VendorName "Actix" # BoardName "GE32+" # Ramdac "ATT20C490" # Dacspeed 110 # Option "dac_8_bit" # Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0 # Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0 # EndSection # Device configured by xf86config: Section "Device" Identifier "LView" VendorName "Sigma Designs" BoardName "LView" Chipset "sigmalview" VideoRam 512 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The Mono server Section "Screen" Driver "mono" Device "LView" Monitor "LView" Subsection "Display" EndSubsection EndSection # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64) --- cut here --- >Fix: I've replaced the buggy XF86_Mono with the old one (as shipped with 2.0.5R) and it worked. >Audit-Trail: >Unformatted: State-Changed-From-To: open->feedback State-Changed-By: scrappy State-Changed-When: Mon Oct 21 23:34:52 PDT 1996 State-Changed-Why: Dust off the cobwebs - Confirm Status State-Changed-From-To: feedback->closed State-Changed-By: scrappy State-Changed-When: Tue Oct 22 14:08:01 PDT 1996 State-Changed-Why: Originator Confirms Closure >Unformatted: