From nobody@FreeBSD.org Thu Jul 19 01:01:00 2001 Return-Path: Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by hub.freebsd.org (Postfix) with ESMTP id 0E52B37B401 for ; Thu, 19 Jul 2001 01:01:00 -0700 (PDT) (envelope-from nobody@FreeBSD.org) Received: (from nobody@localhost) by freefall.freebsd.org (8.11.4/8.11.4) id f6J810c49383; Thu, 19 Jul 2001 01:01:00 -0700 (PDT) (envelope-from nobody) Message-Id: <200107190801.f6J810c49383@freefall.freebsd.org> Date: Thu, 19 Jul 2001 01:01:00 -0700 (PDT) From: Alexander Trapeznikov To: freebsd-gnats-submit@FreeBSD.org Subject: At loading notebook pccardd not correctly initializes pcmcia devices. X-Send-Pr-Version: www-1.0 >Number: 29077 >Category: misc >Synopsis: At loading notebook pccardd not correctly initializes pcmcia devices. >Confidential: no >Severity: non-critical >Priority: low >Responsible: imp >State: closed >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Jul 19 01:10:00 PDT 2001 >Closed-Date: Tue Jun 29 09:17:56 MDT 2004 >Last-Modified: Tue Jun 29 09:17:56 MDT 2004 >Originator: Alexander Trapeznikov >Release: FreeBSD 4.3 STABLE >Organization: IPFORM >Environment: FreeBSD wp4.ipform.ru 4.3-STABLE FreeBSD 4.3-STABLE #10: Tue Jun 26 14:38:27 MSD 2001 root@wp4.ipform.ru:/usr/obj/usr/src/sys/THIS i386 >Description: Hi! At loading notebook pccardd not correctly initializes pcmcia devices. How to be? Notebook: Asus L7300, PCCard: RoverBook LAN 10/100, RoverBook Fax/Modem 56k(Intelligent) Below various messages of the system and settings of system. Why at loading there are messages? =========[start message at loading]=========== Setup PC-CARD: memory beepCard manuf Ethernet, vers Adapter Configuration entries: Index code = auto, driver name = ed Insert commands are: /etc/pccard_ether $device start Remove commands are: /sbin/pccard_ether $device stop Card manuf Intelligent, vers PCMCIA FAX+MODEM Configuration entries: Index code = 0x1f, driver name = sio Code 240 not found Code 240 not found Code Unknown ignored ed0 at port 0x300-0x31f irq 10 slot 0 on pccard0 ed0: address xx:xx:xx:xx:xx:xx, type NE2000 (16 bit) add net default: gateway 192.168.0.1 sio2 at port 0x3e8-0x3ef irq 11 slot 1 on pccard1 sio2: type 16550A pccardd. Doing initial network setup: hostname. =========[end message at loading]=========== =========[start configuration of kernel ]=========== # THIS -- This machine kernel config machine i386 cpu I686_CPU ident THIS maxusers 150 options CPU_SUSP_HLT # generic options options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options NFS #Network Filesystem options NFS_ROOT #Network Filesystem options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #ISO 9660 Filesystem options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options USER_LDT options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options COMPAT_LINUX options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options XSERVER # support for X server # busses device isa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # IDE controller and disks device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 options PSM_HOOKRESUME options PSM_RESETAFTERSUSPEND # video device vga0 at isa? options VESA # syscons is the default console driver, resembling an SCO console device vt0 at isa? options XSERVER options FAT_CURSOR options PCVT_NSCREENS=12 device sc0 at isa? options SC_HISTORY_SIZE=400 options SC_ALT_MOUSE_IMAGE options SC_MOUSE_CHAR=0x03 options SC_DFLT_FONT makeoptions SC_DFLT_FONT=koi8-r options SC_PIXEL_MODE # Floating point support - do not disable. device npx0 at nexus? port IO_NPX flags 0x0 irq 13 # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 # Parallel port options PPC_PROBE_CHIPSET device ppc0 at isa? flags 0x40 irq 7 device ppbus0 # Parallel port bus (required) device lpt0 at ppbus? # Printer device ed # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device vn # Ethernet support pseudo-device ppp 3 # Kernel PPP pseudo-device tun 1 # Packet tunnel pseudo-device pty 16 # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's pseudo-device snp 2 pseudo-device bpf 2 #Berkeley packet filter pseudo-device speaker pseudo-device splash # firewall options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options ICMP_BANDLIM options IPFIREWALL options IPDIVERT options DUMMYNET # some extra options options SOFTUPDATES options P1003_1B options _KPOSIX_PRIORITY_SCHEDULING options _KPOSIX_VERSION=199309L #APM device apm0 # multimedia ? device pcm device pca0 at isa? port IO_TIMER1 device pca1 at isa? port IO_TIMER2 device pcic0 at isa? device pcic1 at isa? device card options PCIC_RESUME_RESET options POWERFAIL_NMI device usb device ugen =========[end configuration of kernel]=========== =========[start /etc/rc.conf ]=========== @pccard_enable="YES" @pccard_beep="0" @pccardd_flags="-v -z" @pccard_ifconfig="inet 192.168.0.201 netmask 255.255.255.0" @pccard_conf="/etc/pccard.conf" @hostname="xxxxxxxxxxx" @defaultrouter="192.168.0.1" @gateway_enable="YES" @ifconfig_ed0="inet 192.168.0.201 netmask 255.255.255.0" =========[end /etc/rc.conf ]=========== =========[start /etc/pccard.conf ]=========== card "Ethernet" "Adapter" config auto "ed" ? ether 0x81 logstr "Apollo PCMCIA Ethernet Adapter" insert /etc/pccard_ether $device start remove /etc/pccard_ether $device stop card "Intelligent" "PCMCIA FAX+MODEM" config auto "sio" ? reset 1000 =========[end /etc/pccard.conf ]=========== =========[start /etc/default/pccard.conf ]=========== io 0x240-0x360 irq 3 5 10 11 15 memory 0xd4000 96k include /etc/pccard.conf =========[end /etc/default/pccard.conf ]=========== =========[start /etc/default/rc.conf ]=========== #!/bin/sh swapfile="NO" # Set to name of swapfile if aux swapfile desired. apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). apmd_enable="NO" # Run apmd to handle APM event from userland. apmd_flags="" # Flags to apmd (if enabled). pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. pccard_beep="2" # pccard beep type. pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). pccardd_flags="" # Additional flags for pccardd. pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file rc_conf_files="/etc/rc.conf /etc/rc.conf.local" =========[end /etc/default/rc.conf ]=========== =========[start pccardc dumpcis]=========== Code 240 not found Code 240 not found code Unknown ignored Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 5 000: d4 0a 53 e9 ff Common memory device information: Device number 1, type Function specific, WPS = OFF Speed = 100nS, Memory block size = 8Kb, 2 units Device number 2, type FLASH EEPROM, WPS = OFF Speed = 150nS, Memory block size = 2Kb, 30 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 53 09 ff Attribute memory device information: Device number 1, type FLASH EEPROM, WPS = OFF Speed = 150nS, Memory block size = 2Kb, 2 units Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 49 01 ab c1 PCMCIA ID = 0x149, OEM ID = 0xc1ab Tuple #4, code = 0x15 (Version 1 info), length = 26 000: 04 01 45 74 68 65 72 6e 65 74 00 41 64 61 70 74 010: 65 72 00 32 2e 30 00 ff 00 ff Version = 4.1, Manuf = [Ethernet], card vers = [Adapter] Addit. info = [2.0] Tuple #5, code = 0x1a (Configuration map), length = 5 000: 01 06 d0 0f 0b Reg len = 2, config register addr = 0xfd0, last config = 0x6 Registers: XX-X---- Tuple #6, code = 0x1b (Configuration entry), length = 7 000: c0 81 18 45 30 fc be Config index = 0x0(default) Interface byte = 0x81 (I/O) wait signal supported Card decodes 5 address lines, limited 8/16 Bit I/O IRQ modes: Level IRQs: 2 3 4 5 6 7 9 10 11 12 13 15 Tuple #7, code = 0x1b (Configuration entry), length = 7 000: 01 08 ca 60 00 03 1f Config index = 0x1 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x300 block length = 0x20 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 02 08 ca 60 20 03 1f Config index = 0x2 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x320 block length = 0x20 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 03 08 ca 60 40 03 1f Config index = 0x3 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x340 block length = 0x20 Tuple #10, code = 0x1b (Configuration entry), length = 7 000: 04 08 ca 60 80 03 1f Config index = 0x4 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x380 block length = 0x20 Tuple #11, code = 0x1b (Configuration entry), length = 7 000: 05 08 ca 60 00 02 1f Config index = 0x5 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x200 block length = 0x20 Tuple #12, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #13, code = 0x14 (No link), length = 0 Tuple #14, code = 0x0 (Null tuple), length = 9 000: 57 42 4c 41 4e 39 32 36 ff Tuple #15, code = 0xff (Terminator), length = 0 Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x15 (Version 1 info), length = 32 000: 04 01 49 6e 74 65 6c 6c 69 67 65 6e 74 00 50 43 010: 4d 43 49 41 20 46 41 58 2b 4d 4f 44 45 4d 00 ff Version = 4.1, Manuf = [Intelligent], card vers = [PCMCIA FAX+MODEM] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 00 02 01 00 PCMCIA ID = 0x200, OEM ID = 0x1 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 02 00 Serial port/modem Tuple #5, code = 0x22 (Functional EXT), length = 4 000: 00 02 0f 5c Serial interface extension: 16550 UART, Parity - Space,Mark,Odd,Even Data bit - 7bit,8bit, Stop bit - 1bit,2bit Tuple #6, code = 0x22 (Functional EXT), length = 9 000: 05 1f 1f 00 04 00 00 04 00 Data modem interface capabilities: Tuple #7, code = 0x22 (Functional EXT), length = 9 000: 06 1f 1f 00 04 00 00 04 00 Fax/modem interface capabilities: Tuple #8, code = 0x22 (Functional EXT), length = 12 000: 02 06 00 3f 1c 03 03 0f 07 00 01 b5 Data modem services available: Tuple #9, code = 0x22 (Functional EXT), length = 8 000: 13 06 00 1f 00 02 00 b5 Fax1/modem services available: Tuple #10, code = 0x22 (Functional EXT), length = 8 000: 23 06 00 1f 00 02 00 b5 Fax2/modem services available: Tuple #11, code = 0x1a (Configuration map), length = 5 000: 01 27 80 ff 67 Reg len = 2, config register addr = 0xff80, last config = 0x27 Registers: XXX--XX- Tuple #12, code = 0x1b (Configuration entry), length = 19 000: cf 41 99 79 55 3d 86 46 26 4c aa 60 f8 03 07 f0 010: bc 86 28 Config index = 0xf(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Continuous supply current: 3.5 x 10mA Max current average over 1 second: 1 x 100mA, ext = 0x46 Max current average over 10 ms: 2 x 100mA Power down supply current: 4.5 x 1mA Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3f8 block length = 0x8 IRQ modes: Level, Pulse, Shared IRQs: 2 3 4 5 7 9 10 15 Max twin cards = 0 Misc attr: (Audio-BVD2) (Power down supported) Tuple #13, code = 0x1b (Configuration entry), length = 7 000: 17 08 aa 60 f8 02 07 Config index = 0x17 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2f8 block length = 0x8 Tuple #14, code = 0x1b (Configuration entry), length = 7 000: 1f 08 aa 60 e8 03 07 Config index = 0x1f Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3e8 block length = 0x8 Tuple #15, code = 0x1b (Configuration entry), length = 7 000: 27 08 aa 60 e8 02 07 Config index = 0x27 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2e8 block length = 0x8 Tuple #16, code = 0xff (Terminator), length = 0 2 slots found =========[end pccardc dumpcis]=========== =========[start dmesg]=========== Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #40: Tue Jul 10 05:06:57 MSD 2001 xxxx@xxxx.xxxxxx.xx:/usr/obj/usr/src/sys/THIS Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (367.50-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff real memory = 67043328 (65472K bytes) avail memory = 61464576 (60024K bytes) Preloaded elf kernel "kernel" at 0xc0382000. VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc00c8f83 (c0008f83) VESA: Silicon Motion SM910 VGA BIOS Pentium Pro MTRR support enabled apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pci0: at 2.0 irq 9 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xfcf0-0xfcff at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 7.2 chip1: port 0x2180-0x218f at device 7.3 on pci0 pcic-pci0: at device 10.0 on pci0 pcic-pci1: at device 10.1 on pci0 isa0: too many drqs vt0 on isa0 vt0: generic, 80 col, color, 12 scr, unknown kbd, [R3.20-b24] vt0: driver is using old-style compatability shims orm0: