From Feisal.O.Mohammed@uwi.tt Fri Jul 21 06:59:25 2000 Return-Path: Received: from enggate.uwi.tt (enggate.uwi.tt [196.3.139.34]) by hub.freebsd.org (Postfix) with SMTP id 2BED737B937 for ; Fri, 21 Jul 2000 06:59:19 -0700 (PDT) (envelope-from Feisal.O.Mohammed@uwi.tt) Received: (qmail 12169 invoked by uid 0); 21 Jul 2000 13:56:23 -0000 Received: from ldc.eng.uwi.tt (192.168.20.31) by bsd.eng.uwi.tt with SMTP; 21 Jul 2000 13:56:23 -0000 Received: from feisalpc.eng.uwi.tt (router.eng.uwi.tt [192.168.20.195]) by ldc.eng.uwi.tt (8.9.1/8.9.1) with SMTP id JAA02161 for ; Fri, 21 Jul 2000 09:52:10 +0400 (GMT) Received: (qmail 596 invoked by uid 1001); 21 Jul 2000 13:59:07 -0000 Message-Id: <20000721135907.595.qmail@feisalpc.eng.uwi.tt> Date: 21 Jul 2000 13:59:07 -0000 From: Feisal.O.Mohammed@uwi.tt Reply-To: feisal@feisalpc.eng.uwi.tt To: FreeBSD-gnats-submit@freebsd.org Subject: Drive on Advansys controller not seen X-Send-Pr-Version: 3.2 >Number: 20085 >Category: kern >Synopsis: Drive on Advansys controller not seen >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-bugs >State: closed >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Jul 21 07:00:01 PDT 2000 >Closed-Date: Fri Jul 21 07:44:54 PDT 2000 >Last-Modified: Fri Jul 21 07:50:01 PDT 2000 >Originator: Feisal Mohammed >Release: FreeBSD 4.0-RELEASE i386 >Organization: University of the West Indies >Environment: Results of dmesg running 3.4 Release Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-RELEASE #2: Sat Jul 15 14:14:22 AST 2000 root@feisalpc.eng.uwi.tt:/usr/src/sys/compile/NEW Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 120273419 Hz CPU: Pentium/P54C (120.27-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x526 Stepping = 6 Features=0x1bf real memory = 67108864 (65536K bytes) avail memory = 62951424 (61476K bytes) Probing for devices on PCI bus 0: chip0: rev 0x03 on pci0.0.0 chip1: rev 0x01 on pci0.7.0 ide_pci0: rev 0x00 on pci0.7.1 vga0: rev 0x02 int a irq 9 on pci0.10.0 xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x30 int a irq 9 on pci0.11.0 xl0: Ethernet address: 00:10:5a:0d:b8:1e xl0: autoneg complete, link status good (half-duplex, 10Mbps) adv0: rev 0x03 int a irq 12 on pci0.12. 0 adv0: AdvanSys Ultra SCSI Host Adapter, SCSI ID 7, queue depth 240 Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 flags 0x10 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (wd2): wd2: 2457MB (5033952 sectors), 4994 cyls, 16 heads, 63 S/T, 512 B/S ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port 1 3C5x9 board(s) on ISA found at 0x300 ep0 at 0x300-0x30f irq 10 on isa ep0: utp/bnc[*BNC*] address 00:60:08:40:56:af aic0 at 0x340-0x35f irq 11 on isa aic0: aic6360, dma, disconnection, parity check vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Intel Pentium detected, installing workaround for F00F bug Waiting 15 seconds for SCSI devices to settle (sa0:aic0:0:4:0): found quirk entry 4 sa0 at aic0 bus 0 target 4 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 3.300MB/s transfers cd0 at aic0 bus 0 target 3 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 5.000MB/s transfers (5.000MHz, offset 8) cd0: cd present [1282356 x 512 byte records] changing root device to da0s4a da0 at adv0 bus 0 target 6 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 20.000MB/s transfers (20.000MHz, offset 15) da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) changing root device to da0a >Description: When booting with the install disks for 4.0 RELEASE, and selecting either upgrade or normal install the disk connected to the Advansys controller is not seen when the partition editor is entered. The boot messages show the controller and disk being recognized but only the disk connected to the IDE controller is visible in the partion editor. >How-To-Repeat: Redo install. >Fix: >Release-Note: >Audit-Trail: State-Changed-From-To: open->closed State-Changed-By: sheldonh State-Changed-When: Fri Jul 21 07:44:54 PDT 2000 State-Changed-Why: unrouteable mail domain "feisalpc.eng.uwi.tt" http://www.freebsd.org/cgi/query-pr.cgi?pr=20085 From: Sheldon Hearn To: feisal@feisalpc.eng.uwi.tt Cc: FreeBSD-gnats-submit@FreeBSD.ORG Subject: Re: kern/20085: Drive on Advansys controller not seen Date: Fri, 21 Jul 2000 16:43:51 +0200 On 21 Jul 2000 13:59:07 GMT, Feisal.O.Mohammed@uwi.tt wrote: > When booting with the install disks for 4.0 RELEASE, and > selecting either upgrade or normal install the disk connected > to the Advansys controller is not seen when the partition editor > is entered. The boot messages show the controller and disk being > recognized but only the disk connected to the IDE controller > is visible in the partion editor. Is the dmesg(8) output which you sent from the 4.0-RELEASE kernel? If not, please try to send _that_ rather. Did this happen in the FDISK partition editor or in the disk label screen? The FDISK partition editor is applied to each disk in succession that you select from a check-box dialogue box. Unless there's actually a serious problem with sysinstall, it sounds to me like you just forgot to select both drives from that check-box dialogue. Are you saying that the disk isn't available from the dialogue box. If so, which drive wasn't available? I assume da0? The disk label screen then allows you to label _all_ the disks that you selected earlier. The disks available are listed at the top of the screen. So if you'd gotten the selection right earlier, they'd both be visible in this window. But what you see here is not as significant as what you see in that dialogue box. Could you provide feedback? I'm not an expert in this area, but I have fallen into the trap of forgetting to select all the disks that I'm interested in from the fdisk selection dialogue check-box list. Ciao, Sheldon. >Unformatted: